scholarly journals Extraction of Zinc and Manganese from Alkaline and Zinc-Carbon Spent Batteries by Citric-Sulphuric Acid Solution

2010 ◽  
Vol 2010 ◽  
pp. 1-13 ◽  
Author(s):  
Francesco Ferella ◽  
Ida De Michelis ◽  
Francesca Beolchini ◽  
Valentina Innocenzi ◽  
Francesco Vegliò
Keyword(s):  
Citric Acid ◽  
Sulphuric Acid ◽  
Acid Concentration ◽  
Acid Leaching ◽  
Sulphuric Acid Solution ◽  
Operating Conditions ◽  
Pulp Density ◽  
Leaching Tests ◽  
Citric Acid Concentration ◽  
Sulphuric Acid Concentration

The paper is focused on the recovery of zinc and manganese from alkaline and zinc-carbon spent batteries. Metals are extracted by sulphuric acid leaching in the presence of citric acid as reducing agent. Leaching tests are carried out according to a24full factorial design, and empirical equations for Mn and Zn extraction yields are determined from experimental data as a function of pulp density, sulphuric acid concentration, temperature, and citric acid concentration. The highest values experimentally observed for extraction yields were 97% of manganese and 100% of zinc, under the following operating conditions: temperature40∘C, pulp density 20%, sulphuric acid concentration 1.8 M, and citric acid 40 gL-1. A second series of leaching tests is also performed to derive other empirical models to predict zinc and manganese extraction. Precipitation tests, aimed both at investigating precipitation of zinc during leaching and at evaluating recovery options of zinc and manganese, show that a quantitative precipitation of zinc can be reached but a coprecipitation of nearly 30% of manganese also takes place. The achieved results allow to propose a battery recycling process based on a countercurrent reducing leaching by citric acid in sulphuric solution.

Synergistic effect of organic acid on the dissolution of mixed nickel-cobalt hydroxide precipitate in sulphuric acid solution

2019 ◽  
Vol 116 (3) ◽  
pp. 319 ◽  
Author(s):  
Sait Kursunoglu
Keyword(s):  
Citric Acid ◽  
Synergistic Effect ◽  
Oxalic Acid ◽  
Organic Acid ◽  
Sulphuric Acid ◽  
Acid Leaching ◽  
Sulphuric Acid Solution ◽  
Cobalt Hydroxide ◽  
Nickel Cobalt ◽  
Hydroxide Precipitate

The synergistic effect of an organic acid on the dissolution of nickel and cobalt from a mixed nickel-cobalt hydroxide precipitate (MHP) in sulphuric acid solution was studied. The effects of sulphuric acid concentration, the type of organic acid, leaching time, leaching temperature and stirring speed on the dissolution of the metals were experimentally investigated. It was observed that there is no beneficial effect of leaching temperature and stirring speed on the dissolution of the metals from the used MHP product which contains 37.7% Ni, 2.1% Co and 5.6% Mn. It was found that citric acid was more effective than oxalic acid for the dissolution of nickel and manganese, whereas oxalic acid was more effective than citric acid for the dissolution of cobalt. The addition of oxalic acid into the leaching system, however, affected the dissolution of nickel negatively because nickel precipitate as nickel oxalate. Therefore, the use of citric acid as synergist for sulphuric acid leaching of MHP product is more promising. After 60 min of leaching, 90.9% Ni, 84.2% Co and 98.1% Mn were dissolved under the following conditions: 0.75 M sulphuric acid, 2 g citric acid, 1/10 solid-to-liquid ratio, 400 rpm stirring speed and 30 °C temperature. The experimental results demonstrate that the addition of citric acid as a synergist for sulphuric acid leaching of a MHP product provides beneficial effect for the dissolution of nickel, cobalt and manganese.

scholarly journals Optimization of Betalain Pigments Extraction Using Beetroot by-Products as a Valuable Source

Inventions ◽  
2021 ◽  
Vol 6 (3) ◽  
pp. 50
Author(s):  
Silvia Lazăr (Mistrianu) ◽  
Oana Emilia Constantin ◽  
Nicoleta Stănciuc ◽  
Iuliana Aprodu ◽  
Constantin Croitoru ◽  
...  
Keyword(s):  
Citric Acid ◽  
Acid Concentration ◽  
Ethanol Concentration ◽  
Extraction Process ◽  
Extraction Time ◽  
Quadratic Model ◽  
Citric Acid Concentration ◽  
Operating Variables ◽  
Conventional Solvent Extraction ◽  
Optimized Conditions

(1) Background: This study is designed to extract the bioactive compounds from beetroot peel for future use in the food industry. (2) Methods: Spectrophotometry techniques analyzed the effect of conventional solvent extraction on betalains and polyphenolic compounds from beetroot peels. Several treatments by varying for factors (ethanol and citric acid concentration, temperature, and time) were applied to the beetroot peel samples. A Central Composite Design (CCD) has been used to investigate the effect of the extraction parameters on the extraction steps and optimize the betalains and total polyphenols extraction from beetroot. A quadratic model was suggested for all the parameters analyzed and used. (3) Results: The maximum and minimum variables investigated in the experimental plan in the coded form are citric acid concentration (0.10–1.5%), ethanol concentration (10–50%), operating temperature (20–60 °C), and extraction time (15–50 min). The experimental design revealed variation in betalain content ranging from 0.29 to 1.44 mg/g DW, and the yield of polyphenolic varied from 1.64 to 2.74 mg/g DW. The optimized conditions for the maximum recovery of betalains and phenols were citric acid concentration 1.5%, ethanol concentration 50%, temperature 52.52 °C, and extraction time 49.9 min. (4) Conclusions: Overall, it can be noted that the extraction process can be improved by adjusting operating variables in order to maximize the model responses.

scholarly journals Atmospheric sulphuric acid and aerosol formation: implications from atmospheric measurements for nucleation and early growth mechanisms

2006 ◽  
Vol 6 (12) ◽  
pp. 4079-4091 ◽  
Author(s):  
S.-L. Sihto ◽  
M. Kulmala ◽  
V.-M. Kerminen ◽  
M. Dal Maso ◽  
T. Petäjä ◽  
...  
Keyword(s):  
Time Delay ◽  
Sulphuric Acid ◽  
Acid Concentration ◽  
Particle Formation ◽  
Early Growth ◽  
Activation Mechanism ◽  
Aerosol Formation ◽  
Atmospheric Measurements ◽  
Nucleation Mechanisms ◽  
Sulphuric Acid Concentration

Abstract. We have investigated the formation and early growth of atmospheric secondary aerosol particles building on atmospheric measurements. The measurements were part of the QUEST 2 campaign which took place in spring 2003 in Hyytiälä (Finland). During the campaign numerous aerosol particle formation events occurred of which 15 were accompanied by gaseous sulphuric acid measurements. Our detailed analysis of these 15 events is focussed on nucleation and early growth (to a diameter of 3 nm) of fresh particles. It revealed that new particle formation seems to be a function of the gaseous sulphuric acid concentration to the power from one to two when the time delay between the sulphuric acid and particle number concentration is taken into account. From the time delay the growth rates of freshly nucleated particles from 1 nm to 3 nm were determined. The mean growth rate was 1.2 nm/h and it was clearly correlated with the gaseous sulphuric acid concentration. We tested two nucleation mechanisms – recently proposed cluster activation and kinetic type nucleation – as possible candidates to explain the observed dependences, and determined experimental nucleation coefficients. We found that some events are dominated by the activation mechanism and some by the kinetic mechanism. Inferred coefficients for the two nucleation mechanisms are the same order of magnitude as chemical reaction coefficients in the gas phase and they correlate with the product of gaseous sulphuric acid and ammonia concentrations. This indicates that besides gaseous sulphuric acid also ammonia has a role in nucleation.

scholarly journals Development of poly(vinyl alcohol)-based membranes by the response surface methodology for environmental applications

2020 ◽  
Vol 24 ◽  
pp. e5
Author(s):  
Juliana Zanol Merck ◽  
Camila Suliani Raota ◽  
Jocelei Duarte ◽  
Camila Baldasso ◽  
Janaina Da Silva Crespo ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Citric Acid ◽  
Response Surface ◽  
Acid Concentration ◽  
Vinyl Alcohol ◽  
Membrane Preparation ◽  
Poly Vinyl Alcohol ◽  
Esterification Reaction ◽  
Citric Acid Concentration ◽  
Ft Ir

The pollution of hydric sources by pharmaceuticals is an issue in many countries, particularly in Brazil. The presence of these substances causes deleterious effects on the environment and human health. One of the main sources of this contamination is domestic sewage, due to the expressive amount of medicines released in their unaltered form. Unfortunately, traditional wastewater treatment is not effective for the removal of pharmaceuticals and, for this reason, membrane technology is an attractive alternative to overcome this issue. In this regard, hydrophilic polymers, such as poly(vinyl alcohol) (PVA), are the most suitable. However, their high affinity with water causes intense swelling, leading to severe modifications in the membrane properties. In view of all these facts, the present work evaluated the swelling of PVA-based membranes, with the aim of finding the membrane preparation method that has the lowest swelling, thereby providing the most suitable characteristics for pharmaceutical removal from wastewater. The membranes were prepared by the casting of a polymeric solution, with PVA as a basis polymer, citric acid as a crosslink agent and glycerol and silver nanoparticles as performance additives. The process optimization was performed using a design of experiments with posterior analysis by the response surface methodology (RSM). The RSM assessed the effect on the membrane swelling of the factors, including citric acid concentration and the time and temperature of crosslinking. The membrane characterization was performed by Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy coupled with a field emission gun (SEM-FEG) and water contact angle (WCA) measurements. Overall, the condition that showed the lowest swelling was obtained with 10% of citric acid and crosslinking for 4 h at 130 °C. Under these conditions, the membrane had a mass swelling of 42% and a dimensional swelling of 24%. Additionally, our statistical analysis revealed that the factors with the dominant effects were the citric acid concentration and the temperature of crosslinking. The FT-IR analysis suggested that the crosslinking occurred by an esterification reaction, as showed by the stretching frequencies of C=O at 1710 cm-1 and ester C-O at 1230 cm-1. Moreover, the SEM-FEG images revealed a smooth and flat surface and a dense cross section with a thickness of ~113 μm. Concerning the WCA, the angle was at ~80°, which is characteristic of hydrophilic materials. Finally, the data suggested that it is possible to optimize the membrane preparation process with adequate properties so that it can be subsequently applied to the removal of pharmaceuticals from hospital wastewater.

Sign in / Sign up

Export Citation Format

Share Document