scholarly journals Nanocrystalline Metal Oxides for Methane Sensors: Role of Noble Metals

2009 ◽  
Vol 2009 ◽  
pp. 1-20 ◽  
Author(s):  
S. Basu ◽  
P. K. Basu
Keyword(s):  
Metal Oxide ◽  
Metal Oxides ◽  
Noble Metal ◽  
Gas Sensors ◽  
Noble Metals ◽  
Industrial Applications ◽  
Metal Catalyst ◽  
Nanocrystalline Metal ◽  
Sensing Properties

Methane is an important gas for domestic and industrial applications and its source is mainly coalmines. Since methane is extremely inflammable in the coalmine atmosphere, it is essential to develop a reliable and relatively inexpensive chemical gas sensor to detect this inflammable gas below its explosion amount in air. The metal oxides have been proved to be potential materials for the development of commercial gas sensors. The functional properties of the metal oxide-based gas sensors can be improved not only by tailoring the crystal size of metal oxides but also by incorporating the noble metal catalyst on nanocrystalline metal oxide matrix. It was observed that the surface modification of nanocrystalline metal oxide thin films by noble metal sensitizers and the use of a noble metal catalytic contact as electrode reduce the operating temperatures appreciably and improve the sensing properties. This review article concentrates on the nanocrystalline metal oxide methane sensors and the role of noble metals on the sensing properties.

scholarly journals Effect of Noble Metals on Hydrogen Sensing Properties of Metal Oxide-based Gas Sensors

2020 ◽  
Vol 29 (6) ◽  
pp. 365-368
Author(s):  
Mirzaei Ali ◽  
Jae Hoon Bang ◽  
Sang Sub Kim ◽  
Hyoun Woo Kim
Keyword(s):  
Metal Oxide ◽  
Gas Sensors ◽  
Noble Metals ◽  
Sensing Properties ◽  
Hydrogen Sensing

scholarly journals The Key Role of Active Sites in the Development of Selective Metal Oxide Sensor Materials

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2554
Author(s):  
Artem Marikutsa ◽  
Marina Rumyantseva ◽  
Elizaveta A. Konstantinova ◽  
Alexander Gaskov
Keyword(s):  
Metal Oxide ◽  
Metal Oxides ◽  
Active Sites ◽  
Noble Metals ◽  
Material Composition ◽  
Mixed Metal Oxides ◽  
Mixed Metal ◽  
Sensor Materials ◽  
The Impact

Development of sensor materials based on metal oxide semiconductors (MOS) for selective gas sensors is challenging for the tasks of air quality monitoring, early fire detection, gas leaks search, breath analysis, etc. An extensive range of sensor materials has been elaborated, but no consistent guidelines can be found for choosing a material composition targeting the selective detection of specific gases. Fundamental relations between material composition and sensing behavior have not been unambiguously established. In the present review, we summarize our recent works on the research of active sites and gas sensing behavior of n-type semiconductor metal oxides with different composition (simple oxides ZnO, In2O3, SnO2, WO3; mixed-metal oxides BaSnO3, Bi2WO6), and functionalized by catalytic noble metals (Ru, Pd, Au). The materials were variously characterized. The composition, metal-oxygen bonding, microstructure, active sites, sensing behavior, and interaction routes with gases (CO, NH3, SO2, VOC, NO2) were examined. The key role of active sites in determining the selectivity of sensor materials is substantiated. It was shown that the metal-oxygen bond energy of the MOS correlates with the surface acidity and the concentration of surface oxygen species and oxygen vacancies, which control the adsorption and redox conversion of analyte gas molecules. The effects of cations in mixed-metal oxides on the sensitivity and selectivity of BaSnO3 and Bi2WO6 to SO2 and VOCs, respectively, are rationalized. The determining role of catalytic noble metals in oxidation of reducing analyte gases and the impact of acid sites of MOS to gas adsorption are demonstrated.

Metal-oxide based ammonia gas sensors: A review

2020 ◽  
Vol 10 ◽  
Author(s):  
Priya Gupta ◽  
Savita Maurya ◽  
Narendra Kumar Pandey ◽  
Vernica Verma
Keyword(s):  
Metal Oxide ◽  
Metal Oxides ◽  
Gas Sensor ◽  
Gas Sensors ◽  
Review Paper ◽  
Gas Sensing ◽  
Gas Sensitivity ◽  
Ammonia Gas ◽  
Ammonia Sensing ◽  
Ammonia Gas Sensors

: This review paper encompasses a study of metal-oxide and their composite based gas sensors used for the detection of ammonia (NH3) gas. Metal-oxide has come into view as an encouraging choice in the gas sensor industry. This review paper focuses on the ammonia sensing principle of the metal oxides. It also includes various approaches adopted for increasing the gas sensitivity of metal-oxide sensors. Increasing the sensitivity of the ammonia gas sensor includes size effects and doping by metal or other metal oxides which will change the microstructure and morphology of the metal oxides. Different parameters that affect the performances like sensitivity, stability, and selectivity of gas sensors are discussed in this paper. Performances of the most operated metal oxides with strengths and limitations in ammonia gas sensing application are reviewed. The challenges for the development of high sensitive and selective ammonia gas sensor are also discussed.

Prebiotic studies on the interaction of zirconia nanoparticles and ribose nucleotides and their role in chemical evolution

2021 ◽  
Vol 20 (2) ◽  
pp. 142-149
Author(s):  
Avnish Kumar Arora ◽  
Pankaj Kumar
Keyword(s):  
Electron Microscopy ◽  
Metal Oxide ◽  
Metal Oxides ◽  
Chemical Evolution ◽  
Ribonucleic Acid ◽  
Zirconium Oxide ◽  
Origins Of Life ◽  
Neutral Ph ◽  
Interaction Studies

AbstractStudies on the interaction of biomolecules with inorganic compounds, mainly mineral surfaces, are of great concern in identifying their role in chemical evolution and origins of life. Metal oxides are the major constituents of earth and earth-like planets. Hence, studies on the interaction of biomolecules with these minerals are the point of concern for the study of the emergence of life on different planets. Zirconium oxide is one of the metal oxides present in earth's crust as it is a part of several types of rocks found in sandy areas such as beaches and riverbeds, e.g. pebbles of baddeleyite. Different metal oxides have been studied for their role in chemical evolution but no studies have been reported about the role of zirconium oxide in chemical evolution and origins of life. Therefore, studies were carried out on the interaction of ribonucleic acid constituents, 5′-CMP (cytidine monophosphate), 5′-UMP (uridine monophosphate), 5′-GMP (guanosine monophosphate) and 5′-AMP (adenosine monophosphate), with zirconium oxide. Synthesized zirconium oxide particles were characterized by using vibrating sample magnetometer, X-Ray Diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy. Zirconia particles were in the nanometre range, from 14 to 27 nm. The interaction of zirconium oxide with ribonucleic acid constituents was performed in the concentration range of 5 × 10−5–300 × 10−5 M. Interaction studies were carried out in three mediums; acidic (pH 4.0), neutral (pH 7.0) and basic (pH 9.0). At neutral pH, maximum interaction was observed. The interaction of zirconium oxide with 5′-UMP was 49.45% and with 5′-CMP 67.98%, while with others it was in between. Interaction studies were Langmurian in nature. Xm and KL values were calculated. Infrared spectral studies of ribonucleotides, metal oxide and ribonucleotide–metal oxide adducts were carried out to find out the interactive sites. It was observed that the nitrogen base and phosphate moiety of ribonucleotides interact with the positive charge surface of metal oxide. SEM was also carried out to study the adsorption. The results of the present study favour the important role of zirconium oxide in concentrating the organic molecules from their dilute aqueous solutions in primeval seas.

scholarly journals Current Strategies for Noble Metal Nanoparticle Synthesis

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Giyaullah Habibullah ◽  
Jitka Viktorova ◽  
Tomas Ruml
Keyword(s):  
Noble Metal ◽  
Noble Metals ◽  
Drug Carriers ◽  
Industrial Applications ◽  
Metal Nanoparticle ◽  
Noble Metal Nanoparticles ◽  
Synthesis Methods ◽  
Gold And Silver Nanoparticles ◽  
Diverse Range ◽  
The Past

AbstractNoble metals have played an integral part in human history for centuries; however, their integration with recent advances in nanotechnology and material sciences have provided new research opportunities in both academia and industry, which has resulted in a new array of advanced applications, including medical ones. Noble metal nanoparticles (NMNPs) have been of great importance in the field of biomedicine over the past few decades due to their importance in personalized healthcare and diagnostics. In particular, platinum, gold and silver nanoparticles have achieved the most dominant spot in the list, thanks to a very diverse range of industrial applications, including biomedical ones such as antimicrobial and antiviral agents, diagnostics, drug carriers and imaging probes. In particular, their superior resistance to extreme conditions of corrosion and oxidation is highly appreciated. Notably, in the past two decades there has been a tremendous advancement in the development of new strategies of more cost-effective and robust NMNP synthesis methods that provide materials with highly tunable physicochemical, optical and thermal properties, and biochemical functionalities. As a result, new advanced hybrid NMNPs with polymer, graphene, carbon nanotubes, quantum dots and core–shell systems have been developed with even more enhanced physicochemical characteristics that has led to exceptional diagnostic and therapeutic applications. In this review, we aim to summarize current advances in the synthesis of NMNPs (Au, Ag and Pt).

scholarly journals CuxO Nanostructure-Based Gas Sensors for H2S Detection: An Overview

Chemosensors ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 127
Author(s):  
Sachin Navale ◽  
Mehrdad Shahbaz ◽  
Sanjit Manohar Majhi ◽  
Ali Mirzaei ◽  
Hyoun-Woo Kim ◽  
...  
Keyword(s):  
Metal Oxides ◽  
Gas Sensors ◽  
Noble Metals ◽  
Oil And Gas ◽  
Detection Mechanism ◽  
Reliable Detection ◽  
Electrical Sensing ◽  
Semiconducting Metal Oxides ◽  
H2s Detection

H2S gas is a toxic and hazardous byproduct of the oil and gas industries. It paralyzes the olfactory nerves, with concentrations above 100 ppm, resulting in loss of smell; prolonged inhalation may even cause death. One of the most important semiconducting metal oxides for the detection of H2S is CuxO (x = 1, 2), which is converted to CuxS upon exposure to H2S, leading to a remarkable modulation in the resistance and appearance of an electrical sensing signal. In this review, various morphologies of CuxO in the pristine form, composites of CuxO with other materials, and decoration/doping of noble metals on CuxO nanostructures for the reliable detection of H2S gas are thoroughly discussed. With an emphasis to the detection mechanism of CuxO-based gas sensors, this review presents findings that are of considerable value as a reference.

scholarly journals Rhodium Oxide Surface-Loaded Gas Sensors

Nanomaterials ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 892 ◽  
Author(s):  
Anna Staerz ◽  
Inci Boehme ◽  
David Degler ◽  
Mounib Bahri ◽  
Dmitry Doronkin ◽  
...  
Keyword(s):  
Metal Oxide ◽  
Noble Metal ◽  
Noble Metals ◽  
Metal Cluster ◽  
Empirical Work ◽  
Oxide Surface ◽  
Metallic State ◽  
X Ray ◽  
Rhodium Clusters ◽  
Sensing Characteristics

In order to increase their stability and tune-sensing characteristics, metal oxides are often surface-loaded with noble metals. Although a great deal of empirical work shows that surface-loading with noble metals drastically changes sensing characteristics, little information exists on the mechanism. Here, a systematic study of sensors based on rhodium-loaded WO3, SnO2, and In2O3—examined using X-ray diffraction, high-resolution scanning transmission electron microscopy, direct current (DC) resistance measurements, operando diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, and operando X-ray absorption spectroscopy—is presented. Under normal sensing conditions, the rhodium clusters were oxidized. Significant evidence is provided that, in this case, the sensing is dominated by a Fermi-level pinning mechanism, i.e., the reaction with the target gas takes place on the noble-metal cluster, changing its oxidation state. As a result, the heterojunction between the oxidized rhodium clusters and the base metal oxide was altered and a change in the resistance was detected. Through measurements done in low-oxygen background, it was possible to induce a mechanism switch by reducing the clusters to their metallic state. At this point, there was a significant drop in the overall resistance, and the reaction between the target gas and the base material was again visible. For decades, noble metal loading was used to change the characteristics of metal-oxide-based sensors. The study presented here is an attempt to clarify the mechanism responsible for the change. Generalities are shown between the sensing mechanisms of different supporting materials loaded with rhodium, and sample-specific aspects that must be considered are identified.

Sign in / Sign up

Export Citation Format

Share Document