scholarly journals New Spectrophotometric Determination of Tinofovir in Bulk and Pharmaceutical Dosage Form

2009 ◽  
Vol 6 (2) ◽  
pp. 537-540 ◽  
Author(s):  
Manish Majumder ◽  
B. Gopinath ◽  
Girish Koni ◽  
Sanjeev Kumar Singh

Two new, selective and sensitive visible spectrophotometric methods (method A and B) have been developed for the estimation of tinofovir in bulk and in pharmaceutical preparations. Tinofovir was subjected to acid hydrolysis and this acid hydrolyzed drug was used for the estimation. Method A is based on the reaction with 3-methyl-2-benzothiazolinone hydrazone in the presence of ferric chloride, to form a colored species with a λmaxat 628.5 nm. Method B is based on the reaction with Folin-ciocalteu phenol’s reagent under alkaline condition with a λmaxat 768 nm. Beer’s law is obeyed in the concentration range of 5-40 µg/mL for method A and 2-30 µg/mL for method B, respectively. The methods were extended to pharmaceutical formulations and there was no interference from any common pharmaceutical excepients and diluents. The result of analysis has been validated statistically and by recovery studies.

2008 ◽  
Vol 5 (4) ◽  
pp. 713-717 ◽  
Author(s):  
Zaheer Ahmed ◽  
Y. N. Manohara ◽  
K. P. Channabasawaraj ◽  
Manish Majumdar

Two selective and sensitive spectrophotometric methods have been developed for the estimation of adefovir dipivoxil in bulk and pharmaceutical preparations. Adefovir dipivoxil was subjected to acid hydrolysis and the hydrolysed product used for the estimation. The methods are based on the reaction with 3-methyl-2-benzothiazolinone hydrazone in the presence of ferric chloride, to form a colored species with absorption maxima at 627 nm. The second method is based on the reaction of drug with 1,2 naphthaquinone -4-sulphonic acid sodium salt, under alkaline conditions which absorbs maximally at 454 nm. Beers law is obeyed in the concentration range of 5-25 µg/mL and 2-10 µg/mL respectively. These methods were extended to pharmaceutical formulations and there was no interference from excepients and diluents. The analytical parameters were evaluated.


Author(s):  
P. V. Lakshmana Rao ◽  
C. Rambabu

Objective: The authors report two simple, accurate and economic spectrophotometric methods A and B for the determination of Itopride hydrochloride in bulk and dosage forms.Methods: The proposed methods are based on the formation of chloroform soluble ion-associates in the presence of acidic dyes namely BPB (Method A) and BCP (Method B) exhibiting lmax at 418 and 418 nm respectively.Results: Beer’s law is found to be obeyed in the concentration range of 2.0-10.0 µg/ml and 2.0-10.0 µg/ml. The molar absorptivities are found to be 1.42x104 and 9.61x103L/mol. cm for methods A and B. These methods are successfully applied for the assay of Itopride hydrochloride in pharmaceutical formulations.


Author(s):  
Abbas Shebeeb Al-kadumi ◽  
Sahar Rihan Fadhel ◽  
Mohammed Abdullah Ahmed ◽  
Luma Amer Musa

We proposed two simple, rapid, and convenient spectrophotometric methods are described for the determination of Amoxicillin in bulk and its pharmaceutical preparations. They are based on the measurement of the flame atomic emission of potassium ion (in first method) and colorimetric determination of the green colored solution for manganite ion at 610 nm formed after reaction of Amoxicillin with potassium permanganate as oxidant agent (in the second method) in basic medium. The working conditions of the methods were investigated and optimized. Beer's law plot showed a good correlation in the concentration range of 5-45 μg/ml. The detection limits and relative standared deviations were (2.573, 2.814 μg/ml) (2.137, 2.498) for the flame emission photometric method and (1.844, 2.016 μg/ml) (1.645,1.932) for colorimetric methods for capsules and suspensions respectively. The methods were successfully applied to the determination of Amoxicillin in capsules and suspensions, and the obtained results were in good agreement with the label claim. No interference was observed from the commonly encountered additives and expectancies.


1980 ◽  
Vol 63 (5) ◽  
pp. 992-995
Author(s):  
Laila Elsayed ◽  
Sayed M Hassan ◽  
Khadiga M Kelani ◽  
Hamed M El-Fatatry

Abstract Two spectrophotometric methods have been developed for the simultaneous determination of nifuroxime and furazolidone in their pharmaceutical preparations. No preliminary separation step is required in either method. The first, a modified Vierordt method, gives accurate and reproducible results for both drugs. Mean percent recoveries for nifuroxime and furazolidone were 99.50 ±1.59 and 100.20 ±1.16 (P = 0.05), respectively. This method also gives accurate and reproducible results for the determination of nifuroxime and furazolidone in their pharmaceutical preparations: Tricofuran vaginal suppositories and powder. The second method, which involves the use of the first-derivative curves, gives unreliable results; the reasons for these are discussed.


2005 ◽  
Vol 2 (3) ◽  
pp. 199-202 ◽  
Author(s):  
L. D. Srinivas ◽  
P. Ravi Kumar ◽  
B. S. Sastry

Two simple and sensitive Visible spectrophotometric methods (A and B) for the determination of Fexofenadine (FEX) in bulk sample and pharmaceutical formulations are described. Methods A and B are based on the formation of ion-association complex involving carboxylic acid group of FEX and the basic dyes, Safranin-O (SFN-O, method A), methylene blue (MB, method B). The results obtained in the above two methods are reproducible and are statistically validated and found to be suitable for the assay of Fexofenadine in bulk and its pharmaceutical formulations.


2015 ◽  
Vol 1 (2) ◽  
pp. 11 ◽  
Author(s):  
Safwan Mohammad Fraihat

Two spectrophotometric methods were developed for the determination Tadalafil in pharmaceutical preparations. The methods are based on the oxidation reaction with known excess amount of Ce(IV) and estimation of the unreacted amount using Indigo carmine dye (Method A) and in Methylene blue dye  (Method B). the factors affecting the reaction conditions were studied and the absorbance of absorbance of the oxidation reaction products were monitored at 610 and 600 nm for methods A and B respectively. Beer's law is obeyed in the concentration ranges 11 to 50 and 10 to 55 ppm, the limits of detection and quantification are reported. The proposed method was applied to the determination of the drug in pharmaceutical formulations and the results demonstrated that the method is equally accurate, precise and reproducible as the official methods. The validity of method was established by recovery studies with satisfactory results.


Sign in / Sign up

Export Citation Format

Share Document