scholarly journals XPS Study of Chemical Changes on the La/Ce Treated Surface of A361 Aluminium Alloy Exposed to Air at Temperatures up to500∘C

2009 ◽  
Vol 2009 ◽  
pp. 1-7 ◽  
Author(s):  
A. Pardo ◽  
S. Feliú ◽  
M. C. Merino ◽  
R. Arrabal ◽  
E. Matykina
Keyword(s):  
Rare Earth ◽  
Aluminium Alloy ◽  
Cerium Oxide ◽  
Photoelectron Spectroscopy ◽  
Oxide Coating ◽  
Conversion Coating ◽  
Chemical Changes ◽  
X Ray ◽  
Xps Study ◽  
Al Matrix

The chemical changes that take place on the rare earth treated surface of the A361 aluminium alloy exposed to air at temperatures between 100 and500∘Chave been examined using X-ray photoelectron spectroscopy (XPS). The most notable features discussed in this work are the disappearance of Mg and Si signals at the tested temperatures and disappearance of the Ce signal at temperatures of 400–500∘C. The biphasic microstructure of the A361 alloy, constituted by close to 12 wt% Si and the Al matrix, plays an important role in many of the results obtained. The notable growth of aluminium oxide across the conversion coating in the case of the Ce-treated surface is related to the structural transformation experienced by the cerium oxide coating at 400–500∘C.

A combined atomic force microscopy (AFM)/X‐ray photoelectron spectroscopy (XPS) study of organosilane molecules adsorbed on the aluminium alloy L157‐T6

1999 ◽  
Vol 9 (11) ◽  
pp. 2935-2941 ◽  
Author(s):  
Timothy R. E. Simpson ◽  
John F. Watts ◽  
Peter A. Zhdan ◽  
James E. Castle ◽  
Roger P. Digby
Keyword(s):  
Atomic Force Microscopy ◽  
Aluminium Alloy ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Xps Study

scholarly journals Phytosynthetic Fabrication of Lanthanum Ion-Doped Nickel Oxide Nanoparticles Using Sesbania grandiflora Leaf Extract and Their Anti-Microbial Properties

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 124
Author(s):  
Srihasam Saiganesh ◽  
Thyagarajan Krishnan ◽  
Golla Narasimha ◽  
Hesham S. Almoallim ◽  
Sulaiman Ali Alhari ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Rare Earth ◽  
Nickel Oxide ◽  
Photoelectron Spectroscopy ◽  
Metal Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Nio Nanoparticles ◽  
X Ray ◽  
Sesbania Grandiflora

Over the past few years, the photogenic fabrication of metal oxide nanoparticles has attracted considerable attention, owing to the simple, eco-friendly, and non-toxic procedure. Herein, we fabricated NiO nanoparticles and altered their optical properties by doping with a rare earth element (lanthanum) using Sesbania grandiflora broth for antibacterial applications. The doping of lanthanum with NiO was systematically studied. The optical properties of the prepared nanomaterials were investigated through UV-Vis diffuse reflectance spectra (UV-DRS) analysis, and their structures were studied using X-ray diffraction analysis. The morphological features of the prepared nanomaterials were examined by scanning electron microscopy and transmission electron microscopy, their elemental structure was analyzed by energy-dispersive X-ray spectral analysis, and their oxidation states were analyzed by X-ray photoelectron spectroscopy. Furthermore, the antibacterial action of NiO and La-doped NiO nanoparticles was studied by the zone of inhibition method for Gram-negative and Gram-positive bacterial strains such as Escherichia coli and Bacillus sublitis. It was evident from the obtained results that the optimized compound NiOLa-04 performed better than the other prepared compounds. To the best of our knowledge, this is the first report on the phytosynthetic fabrication of rare-earth ion Lanthanum (La3+)-doped Nickel Oxide (NiO) nanoparticles and their anti-microbial studies.

scholarly journals Effect of calcination temperature on rare earth tailing catalysts for catalytic methane combustion

2020 ◽  
Vol 9 (1) ◽  
pp. 734-743
Author(s):  
Ran Zhao ◽  
ZiChen Tian ◽  
Zengwu Zhao
Keyword(s):  
Rare Earth ◽  
Mine Tailings ◽  
Photoelectron Spectroscopy ◽  
Methane Combustion ◽  
Space Velocity ◽  
High Catalytic Activity ◽  
Reduction Peak ◽  
X Ray ◽  
Different Temperatures ◽  
Bayan Obo

AbstractBayan Obo tailings are rich in rare earth elements (REEs), iron, and other catalytic active substances. In this study, mine tailings were calcined at different temperatures and tested for the catalytic combustion of low-concentration methane. Upon calcination at 600°C, high catalytic activity was revealed, with 50% CH4 conversion at 587°C (space velocity of 12,000 mL/g h). The physicochemical properties of catalysts were characterized using thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, hydrogen temperature-programmed reduction (H2-TPR), and X-ray photoelectron spectroscopy (XPS). Compared to the raw ore sample, the diffraction peak intensity of Fe2O3 increased post calcination, whereas that of CeCO3F decreased. A porous structure appeared after the catalyst was calcined at 600°C. Additionally, Fe, Ce, Ti, and other metal elements were more highly dispersed on the catalyst surface. H2-TPR results revealed a broadening of the reduction temperature range for the catalyst calcined at 600°C and an increase in the reduction peak. XPS analysis indicated the presence of Ce in the form of Ce3+ and Ce4+ oxidation states and the coexistence of Fe in the form of Fe2+ and Fe3+. Moreover, XPS revealed a higher surface Oads/Olatt ratio. This study provides evidence for the green reuse of Bayan Obo mine tailings in secondary resources.

Xps Analysis of the Sapphire Surface as a Function of High Temperature Vacuum Annealing

1989 ◽  
Vol 159 ◽  
Author(s):  
E.D. Richmond
Keyword(s):  
High Temperature ◽  
Binding Energy ◽  
Photoelectron Spectroscopy ◽  
Vacuum Annealing ◽  
Xps Analysis ◽  
Chemical Changes ◽  
Cleaning Procedure ◽  
Sapphire Surface ◽  
X Ray ◽  
First Time

ABSTRACTFor the first time the (1102) surface of sapphire has been investigated by X-ray photoelectron spectroscopy to ascertain chemical changes resulting from annealing in vacuum at 1300° C and 1450° C. As received substrates had a substantial surface C contaminant. For substrates that were chemically cleaned before inserting them into the MBE system no trace of carbon is detected. A residual flourine contaminant results from the cleaning procedure and is desorbed by the vacuum annealing. Spectra of annealed substrates are compared to the unannealed chemically cleaned substrates. The annealed substrates exhibit 0.4 to 0.5 eV shift to higher binding energy of the Al peak and a 0.3 eV shift to higher binding energy of the O peak. In addition, a 2% depletion of oxygen from the surface occurs.

scholarly journals Synthesis of new Ln4(Al2O6F2)O2 (Ln = Sm, Eu, Gd) phases with a cuspidine-related structure

IUCrJ ◽  
2019 ◽  
Vol 6 (1) ◽  
pp. 128-135 ◽  
Author(s):  
Aroa Morán-Ruiz ◽  
Aritza Wain-Martin ◽  
Alodia Orera ◽  
María Luisa Sanjuán ◽  
Aitor Larrañaga ◽  
...  
Keyword(s):  
Rare Earth ◽  
Low Temperature ◽  
Raman Spectra ◽  
Photoelectron Spectroscopy ◽  
Binding Energies ◽  
Temperature Reaction ◽  
Rietveld Refinements ◽  
X Ray ◽  
Vinylidene Difluoride ◽  
Vacant Position

The first fluorination of the cuspidine-related phases of Ln4(Al2O7□)O2 (where Ln = Sm, Eu, Gd) is reported. A low-temperature reaction with poly(vinylidene difluoride) lead to the fluorine being substituted in place of oxygen and inserted into the vacant position between the dialuminate groups. X-ray photoelectron spectroscopy shows the presence of the F 1s photoelectron together with an increase in Al 2p and rare-earth 4d binding energies supporting F incorporation. Energy-dispersive X-ray spectroscopy analyses are consistent with the formula Ln4(Al2O6F2)O2, confirming that substitution of one oxygen by two fluoride atoms has been achieved. Rietveld refinements show an expansion in the cell upon fluorination and confirm that the incorporation of fluoride in the Ln4(Al2O7□)O2 structure results in changes in Al coordination from four to five. Thus, the isolated tetrahedral dialuminate Al2O7 groups are converted to chains of distorted square-based pyramids. These structural results are also discussed based on Raman spectra.

scholarly journals Raman Study of Nanocrystalline-Doped Ceria Oxide Thin Films

Coatings ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 432 ◽  
Author(s):  
Nursultan Kainbayev ◽  
Mantas Sriubas ◽  
Darius Virbukas ◽  
Zivile Rutkuniene ◽  
Kristina Bockute ◽  
...  
Keyword(s):  
Thin Films ◽  
Rare Earth ◽  
Cerium Oxide ◽  
Oxygen Vacancies ◽  
Raman Shift ◽  
Size Factor ◽  
Doped Ceria ◽  
X Ray ◽  
Sio2 Substrate ◽  
Lower Frequencies

Samarium-doped ceria (SDC) and gadolinium-doped ceria (GDC) thin films were formed by e-beam vapor deposition on SiO2 substrate, changing the deposition rate and substrate temperature during the deposition. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-Ray spectrometry (EDS) were employed in order to investigate the structure ad morphology of the films. A single Raman peak describing the structure of undoped CeO2 was observed at a frequency of 466 cm−1. Doping of cerium oxide with rare-earth elements shifted the peak to lower frequencies (for Sm—462 cm−1). This shift occurs due to the increased number of oxygen vacancies in doped cerium oxide and it depends on the size and concentration factor of the dopant. It was found that wavenumbers and their intensity differed for the investigated samples, even though the peaks resembled each other in shape. The indicated bands for doped ceria originated as a result of the Raman regime (F2g) of fluorite dioxide associated with the space group (Fm3m). The observed peak‘s position shifting to a lower frequency range demonstrates the symmetric vibrations of oxygen ions around Ce4+ ions in octahedra CeO8. Raman shift to the lower frequencies for the doped samples has two reasons: an increase in oxygen vacancies caused by doping cerium oxide with rare-earth materials and the size factor, i.e., the change in frequency Δω associated with the change in the lattice constant Δa.

Al Si Oxide Coating as Ttritium Penetration Barrier on 316L Stainless Steel Prepared by a Combined Process

2008 ◽  
Vol 59 ◽  
pp. 76-81
Author(s):  
Hong Bing Liu ◽  
Jie Tao ◽  
Jiang Xu ◽  
Zhao Feng Chen ◽  
Xian Jun Sun
Keyword(s):  
Photoelectron Spectroscopy ◽  
Hydrogen Permeability ◽  
Oxide Coating ◽  
Favorable Effect ◽  
X Ray Diffraction ◽  
Combined Process ◽  
X Ray ◽  
Transmission Electron ◽  
Outermost Surface ◽  
Glow Plasma

Based on the favorable effect of the elements Al and Si on the improvement in reducing hydrogen permeability, a new combined process of simultaneous aluminizing and siliconizing, followed by oxidizing treatments using double glow plasma technology on 316L substrate was developed in this work. Microstructure and phase structure of as- prepared coating was examined by scanning electronic microscopy (SEM), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS), respectively. The results showed that the simultaneous aluminizing and siliconizing coating consisted of an outer aluminide layer (dissolved Si) and a diffusion zone. After a combined process, a continuous and compact Al2O3-rich coating was formed at the outermost surface. SiO2 was also detectable in the oxide coating.

X-ray photoelectron spectroscopy and corrosion studies of zinc phosphate coated on 7075-T6 aluminium alloy

1994 ◽  
Vol 29 (14) ◽  
pp. 3653-3657 ◽  
Author(s):  
W. F. Heung ◽  
Y. P. Yang ◽  
M. Y. Zhou ◽  
P. C. Wong ◽  
K. A. R. Mitchell ◽  
...  
Keyword(s):  
Aluminium Alloy ◽  
Photoelectron Spectroscopy ◽  
Zinc Phosphate ◽  
X Ray ◽  
Corrosion Studies
Sign in / Sign up

Export Citation Format

Share Document