scholarly journals A Sensitive UV Spectrophotometric Method for the Determination of Gabapentin

2009 ◽  
Vol 6 (s1) ◽  
pp. S163-S170 ◽  
Author(s):  
R. Singh Gujral ◽  
S. Manirul Haque ◽  
P. Shanker
Keyword(s):  
Spectrophotometric Method ◽  
Good Accuracy ◽  
Limit Of Detection ◽  
Low Cost ◽  
Pharmaceutical Formulations ◽  
Accuracy And Precision ◽  
Ich Guidelines ◽  
Limit Of Quantitation ◽  
Precision Limit

An accurate and validated spectrophotometric method was developed for the determination of gabapentin. This is simple, sensitive and low cost UV spectrophotometric method. The method is based on the direct measurement of the native absorbance of the drug. The detection was done at 210 nm. The method was linear in the range of 0.25 - 3.5 µ g/mL with correlation coefficient of 0.9999. It is validated according to the ICH guidelines with respect to linearity, selectivity, accuracy and precision, limit of quantitation and limit of detection. The method has been applied to assess gabapentin in pharmaceutical formulations with good accuracy and precision and relatively free of interference from coexisting substances.

scholarly journals Spectrophotometric Determination of Olmutinib in Bulk by Area under Curve and First Order Derivative Methods and its Validation as per ICH guidelines

2019 ◽  
Vol 9 (4-A) ◽  
pp. 349-354
Author(s):  
BALU KHANDARE ◽  
Atish C. Musle ◽  
Sanket S. Arole ◽  
Pravin V. Popalghat
Keyword(s):  
Area Under Curve ◽  
Limit Of Detection ◽  
Order Derivative ◽  
Spectrometric Method ◽  
First Order ◽  
Accuracy And Precision ◽  
Ich Guidelines ◽  
Validation Parameters ◽  
Limit Of Quantitation

Abstract: A simple, precise and economical UV-spectrophotometric method has been developed for the estimation of Olmutinib from bulk. Two methods were developed First method (A) applied was area under curve (AUC) in which the area was integrated in wavelength from 262-272nm. Second method (B) was first order derivative spectrometric method. In this method absorbance at λmin=256.57nm, λmax=282.83nm and zero cross=267.68nm was measured. Calibration curves were plotted for the method by using instrumental response at selected wavelength and concentration of analyte in the solution. In both the methods, linearity was observed in the concentration range of 2-12µg/ml at the λmax=267.68nm. Accuracy and precision studies were carried out and results were satisfactorily obtained. The drug at each of the 80 %, 100 % and 120 % levels showed good recoveries that is in the range of 98.00 to 99.00% for both methods, hence it could be said that the method was accurate. Limit of detection (LOD) and limit of quantitation (LOQ) were determined for the method. The method was validated as per International Conference on Harmonization. All validation parameters were within the acceptable limit. The developed method was successfully applied to estimate the amount of Olmutinib in pharmaceutical formulation.

scholarly journals DEVELOPMENT AND VALIDATION OF ULTRAVIOLET-SPECTROPHOTOMETRIC METHOD FOR DETERMINATION OF FEBUXOSTAT FOR CONDUCTING IN-VITRO QUALITY CONTROL TESTS IN BULK AND PHARMACEUTICAL DOSAGE FORMS

2018 ◽  
Vol 11 (9) ◽  
pp. 115
Author(s):  
Jaspreet Kaur ◽  
Daljit Kaur ◽  
Sukhmeet Singh
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Dosage Forms ◽  
Pharmaceutical Dosage Forms ◽  
Relative Standard ◽  
Limit Of Quantitation ◽  
Development And Validation

Objective: A simple, accurate, and selective ultraviolet-spectrophotometric method has been developed for the estimation of febuxostat in the bulk and pharmaceutical dosage forms.Method: The method was developed and validated according to International Conference on Harmonization (ICH Q2 R1) guidelines. The developed method was validated statistically with respect to linearity, range, precision, accuracy, ruggedness, limit of detection (LOD), limit of quantitation (LOQ), and recovery. Specificity of the method was demonstrated by applying different stressed conditions to drug samples such as acid hydrolysis, alkaline hydrolysis, oxidative, photolytic, and thermal degradation.Results: The study was conducted using phosphate buffer pH 6.8 and λmax was found to be 312 nm. Standard plot having a concentration range of 1–10 μg/ml showed a good linear relationship with R2=0.999. The LOD and LOQ were found to be 0.118 μg/ml and 0.595 μg/ml, respectively. Recovery and percentage relative standard deviations were found to be 100.157±0.332% and <2%, respectively.Conclusion: Proposed method was successfully applicable to the pharmaceutical formulations containing febuxostat. Thus, the developed method is found to be simple, sensitive, accurate, precise, reproducible, and economical for the determination of febuxostat in pharmaceutical dosage forms.

scholarly journals Spectrophotometric Determination of Some Antihistaminic Drugs Using 7,7,8,8-Tetracyanoquinodimethane (TCNQ)

2006 ◽  
Vol 89 (1) ◽  
pp. 46-52 ◽  
Author(s):  
Amr M Badawey ◽  
Samah S Abbas ◽  
Hayam M Loutfy
Keyword(s):  
Spectrophotometric Determination ◽  
Spectrophotometric Method ◽  
Good Accuracy ◽  
Pharmaceutical Formulations ◽  
European Pharmacopoeia ◽  
Accuracy And Precision ◽  
Antihistaminic Drugs ◽  
Assay Conditions ◽  
Sensitive Spectrophotometric Method

Abstract A simple and sensitive spectrophotometric method is suggested for analysis of 3 antihistaminic drugs, acrivastine (I), mequitazine (II), and dimethindene maleate (III). The method is based on reaction of the drugs with 7,7,8,8-tetracyanoquinodimethane (TCNQ) in acetonitrile to form highly stable colored products that are measured at 750, 766, and 844 nm for I and II, and 480 and 618 nm for III. Beer's law is obeyed in the ranges of 560 g/mL for I, 550 g/mL for II, and 1070 g/mL for III. The optimum assay conditions and their applicability to the determination of the cited drugs in pharmaceutical formulations are described. The method is statistically analyzed as compared with the European Pharmacopoeia (2001) method for the analysis of dimethindene maleate and reference methods for acrivastine and mequitazine drugs revealing good accuracy and precision.

DEVELOPMENT AND VALIDATION OF UV SPECTROPHOTOMETRIC METHOD FOR THE ESTIMATION OF ROTIGOTINE IN NANOSTRUCTURED LIPID CARRIERS

INDIAN DRUGS ◽  
2021 ◽  
Vol 58 (08) ◽  
pp. 61-67
Author(s):  
Jagruti B. Prajapati ◽  
Gayatri Patel ◽  
Keyword(s):  
Correlation Coefficient ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Nanostructured Lipid Carriers ◽  
Ich Guidelines ◽  
Limit Of Quantitation ◽  
Recovery Study ◽  
Nanostructure Lipid Carriers ◽  
Development And Validation

Rotigotine (RTG) loaded Nanostructure Lipid Carriers (NLCs) were developed for the treatment of Parkinson’s disease. To estimate RTG entrapped in NLCs, UV spectrophotometric method was developed and validated. The solvent and wavelength of detection were optimized in order to maximize sensitivity of the proposed method. The method was validated for different parameters like linearity, precision, specificity, accuracy, limit of detection (LOD), limit of quantitation (LOQ) and robustness as per ICH guidelines. A wavelength maximum of RTG in methanol: chloroform (6:4V/V) mixture was found at 273 nm. The method was found to be linear in the range of 40 to 200 µg/mL with a correlation coefficient (r2 ) of 0.998. The accuracy of the method was studied by recovery study and % recovery was found in range of 99 to 100.37 %. The LOD and LOQ were found to be 0.09 µg/mL and 6.1 µg/mL, respectively. The method is simple, accurate and requires relatively inexpensive instrument. The method was used successfully for determination of RTG loaded into NLCs.

DEVELOPMENT AND VALIDATION OF UV SPECTROPHOTOMETRIC METHOD FOR THE ESTIMATION OF AGOMELATINE IN NANOSTRUCTURED LIPID CARRIERS

INDIAN DRUGS ◽  
2017 ◽  
Vol 54 (03) ◽  
pp. 52-57
Author(s):  
S. D Verma ◽  
J. B. Prajapati ◽  
A. A. Patel ◽  
Keyword(s):  
Correlation Coefficient ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Nanostructured Lipid Carriers ◽  
Ich Guidelines ◽  
Limit Of Quantitation ◽  
Recovery Study ◽  
Development And Validation

The objective of work was to develop and validate a UV spectrophotometric method for determination of agomelatine (AGM) loaded in nanostructured lipid carriers (NLCs). The solvent and wavelength of detection were optimized in order to maximize sensitivity of proposed method. The method was validated for different parameters like linearity, precision, specificity, accuracy, limit of detection (LOD), limit of quantitation (LOQ) and robustness as per ICH guidelines. A wavelength maximum of AGM in methanol: chloroform (7:3V/V) mixture was found at 235nm. The method was found to be linear in the range of 1 to 6μg/mL with a correlation coefficient (r2) of 0.997. The accuracy of the method was studied by recovery study and % recovery was found in range of 99 to 100.11%. The LOD and LOQ were found to be 0.043μg/mL and 0.141μg/mL respectively. The method is simple, accurate and requires relatively inexpensive instrument. The method was used successfully for determination of AGM loaded into NLCs.

Development of Validated UV Spectrophotometric Method for Assay of Ozagrel and its Pharmaceutical Formulations

2018 ◽  
pp. 69-77 ◽  
Author(s):  
Vishal N Kushare ◽  
Sachin S Kushare ◽  
Sagar V Ghotekar
Keyword(s):  
Spectrophotometric Method ◽  
Pharmaceutical Formulations ◽  
Routine Practice ◽  
Quantitation Limit ◽  
Accuracy And Precision ◽  
Ich Guidelines ◽  
Validation Parameters ◽  
Standard Values ◽  
Bulk Drug

UV Spectrophotometric method was developed and validated for the quantitative determination of Ozagrel in bulk drug and in pharmaceutical formulations. Ozagrel shows the maximum absorbance at 270 nm. Ozagrel follows Beer’s law in the concentration range of 1.0-10.0 µg/ml (r = 0.999). The detection limit (DL) and quantitation limit (QL) were 0.4629 and 1.4027 µg/ml respectively. Accuracy and precision were found to be satisfactory. The developed methods were validated according to ICH guidelines. All the validation parameters were found to be satisfactory accordance with the standard values. Therefore, the proposed method can be used for routine practice for the determination of Ozagrel in assay of bulk drug and pharmaceutical formulations.

scholarly journals DEVELOPMENT AND VALIDATION OF UV-SPECTROPHOTOMETRIC METHOD FOR ESTIMATION OF HYDROQUINONE IN BULK, MARKETED CREAM AND PREAPARED NLC FORMULATION

2017 ◽  
Vol 9 (5) ◽  
pp. 102
Author(s):  
Sukhjinder Kaur ◽  
Taranjit Kaur ◽  
Gurdeep Kaur ◽  
Shivani Verma
Keyword(s):  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Pure Form ◽  
Nanostructured Lipid Carrier ◽  
Limit Of Quantification ◽  
Double Beam ◽  
Uv Visible ◽  
Development And Validation

Objective: The aim of the present work was to develop a simple, rapid, accurate and economical UV-visible spectrophotometric method for the determination of hydroquinone (HQ) in its pure form, marketed formulation as well as in the prepared nanostructured lipid carrier (NLC) systems and to validate the developed method.Methods: HQ was estimated at UV maxima of 289.6 nm in pH 5.5 phosphate buffer using UV-Visible double beam spectrophotometer. Following the guidelines of the International Conference on Harmonization (ICH), the method was validated for various analytical parameters like linearity, precision, and accuracy robustness, ruggedness, limit of detection, quantification limit, and formulation analysis.Results: The obtained results of the analysis were validated statistically. Recovery studies were performed to confirm the accuracy of the proposed method. In the developed method, linearity over the concentration range of 5-40 μg/ml of HQ was observed with the correlation coefficient of 0.998 and found in good agreement with Beer Lambert’s law. The precision (intra-day and inter-day) of the method was found within official RCD limits (RSD<2%).Conclusion: The sensitivity of the method was assessed by determining the limit of detection and limit of quantification. It could be concluded from the results obtained that the purposed method for estimation of HQ in pure form, in the marketed ointment and in the prepared NLC-formulation was simple, rapid, accurate, precise and economical. It can be used successfully in the quality control of pharmaceutical formulations and for the routine laboratory analysis.

scholarly journals A simple spectrophotometric method for the determination of methyldopa using p-chloranil in the presence of hydrogen peroxide

2008 ◽  
Vol 33 (3) ◽  
pp. 7-12 ◽  
Author(s):  
M. A. Gotardo ◽  
L. S. Lima ◽  
R. Sequinel ◽  
J. L. Rufino ◽  
L. Pezza ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Limit Of Quantification ◽  
Coefficients Of Variation ◽  
The Common ◽  
Interday Precision ◽  
Sensitive Spectrophotometric Method

A simple, rapid and sensitive spectrophotometric method has been developed for the determination of methyldopa in pharmaceutical formulations. The method is based on the reaction between tetrachloro-p-benzoquinone (p-chloranil) and methyldopa, accelerated by hydrogen peroxide (H2O2), producing a violet-red compound (λmax = 535 nm) at ambient temperature (25.0 ± 0.2 ºC). Experimental design methodologies were used to optimize the measurement conditions. Beer's law is obeyed in a concentration range from 2.10 x 10-4 to 2.48 x 10-3 mol L-1 (r = 0.9997). The limit of detection was 7.55 x 10-6 mol L-1 and the limit of quantification was 2.52 x 10-5 mol L-1. The intraday precision and interday precision were studied for 10 replicate analyses of 1.59 x 10-3 mol L-1 methyldopa solution and the respective coefficients of variation were 0.7 and 1.1 %. The proposed method was successfully applied to the determination of methyldopa in commercial brands of pharmaceuticals. No interferences were observed from the common excipients in the formulations. The results obtained by the proposed method were favorably compared with those given by the Brazilian Pharmacopoeia procedure at 95 % confidence level.

scholarly journals Sensitive Spectrophotometric Determinations of Paracetamol and Protriptyline HCl Using 3-Chloro-7-hydroxy-4-methyl-2H-chromen-2-one

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Kumble Divya ◽  
Badiadka Narayana ◽  
Majal Sapnakumari
Keyword(s):  
Charge Transfer ◽  
Spectrophotometric Method ◽  
Charge Transfer Complex ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Pharmaceutical Samples ◽  
Chromogenic Reagent ◽  
Detection And Quantification

A new spectrophotometric method is developed for the determination of Paracetamol (PCT) and protriptyline HCl (PTP) in pure forms and in pharmaceutical formulations. The experiment involves the use of 3-chloro-7-hydroxy-4-methyl-2H-chromen-2-one as a novel chromogenic reagent for the determination of PCT and PTP. The method is based on the formation of charge transfer complex between the drugs and chromogenic reagent. Beer's law is obeyed in the concentration ranges 10.00–60.00 µg mL−1 for PCT at 545 nm and 40.00–160.00 µg mL−1 for PTP at 468 nm. The molar absorptivity, Sandell, sensitivity, and limit of detection and quantification are also calculated. The method has been successfully applied for the determination of both PCT and PTP in pharmaceutical samples with acceptable results.

scholarly journals Voltammetric Determination of Ascorbic Acid in Pharmaceutical Formulations Using Modified Iodine-Coated Platinum Electrode

Revista Vitae ◽  
2021 ◽  
Vol 28 (2) ◽  
Author(s):  
Mohammad Amayreh ◽  
Wafa Hourani ◽  
Mohammed Khair Hourani
Keyword(s):  
Ascorbic Acid ◽  
Platinum Electrode ◽  
Limit Of Detection ◽  
Statistical Tests ◽  
Supporting Electrolyte ◽  
Pharmaceutical Formulations ◽  
Cyclic Voltammograms ◽  
Limit Of Quantitation ◽  
Significant Difference

Background: Despite the high reactivity of the platinum electrode, the iodine-coated platinum electrode shows obvious inertness toward adsorption and surface processes. For that, iodine-coated platinum electrodes accommodate themselves to interesting voltammetric applications. Objectives: This study reports using the modified iodine-coated polycrystalline platinum electrode as a voltammetric sensor for ascorbic acid determination in pharmaceutical formulations. Methods: The developed voltammetric method based on recording cyclic voltammograms of ascorbic acid at iodine-coated electrode The optimized experimental parameters for the determination of ascorbic acid were using 0.1 M KCl as a supporting electrolyte with a scan rate of 50mV/s. Results: The anodic peak related to ascorbic acid oxidation was centered at nearly 0.28V. An excellent and extended linear dependence of the oxidative peak current on the concentration of ascorbic acid was observed in the range 2.84x10-3 - 5.68 mM. The limit of detection (LOD) and limit of quantitation (LOQ) were 1.0 µM and 3.01 µM, respectively, attesting to the method’s sensitivity. The investigation for the effect of potential interference from multivitamin tablet ingredients (vitamins B1, B6, B12, folic acid, citric acid, sucrose, glucose, and zinc) indicated specific selectivity toward ascorbic acid and the absence of any electrochemical response toward these components. Recovery results in the range 98.93±2.78 - 99.98±5.20 for spiked standard ascorbic acid in pharmaceutical formulations further confirmed the potential applicability of the developed method for the determination of ascorbic acid in real samples. Conclusions: The developed method was successfully applied to the analysis of ascorbic acid (vitamin C), and the obtained results were in good agreement with the labeled values; besides, the statistical tests indicated no significant difference at p=0.05 with a 95% confidence level.

Sign in / Sign up

Export Citation Format

Share Document