scholarly journals An Approach to Pipe Image Interpretation Based Condition Assessment for Automatic Pipe Inspection

2009 ◽  
Vol 2009 ◽  
pp. 1-11 ◽  
Author(s):  
John Mashford ◽  
David Marlow ◽  
Stewart Burn
Keyword(s):  
Asset Management ◽  
Morphological Analysis ◽  
Image Interpretation ◽  
Principal Component ◽  
Condition Assessment ◽  
Support Vector ◽  
Inspection System ◽  
Pipe Inspection ◽  
Segmented Image ◽  
Inspection Systems

Condition assessment forms an important part of the asset management of buried pipelines. This is carried out through the use of inspection systems which usually consist of an image acquisition device attached to a mobile robotic platform. Complete or partial automation of image interpretation could increase the efficiency and objectivity of pipe inspection. A key component of an automatic pipe inspection system is the segmentation module. This paper describes an approach to automatic pipe inspection using pixel-based segmentation of colour images by support vector machine (SVM) coupled with morphological analysis of the principal component of the segmented image. The morphological analysis allows the principal component of the segmented image to be decomposed into the pipe flow lines region, the pipe joints, and adjoining defects. A simple approach to detecting pipe connections using fuzzy membership functions relating to defect size and location is also described.

An Artificial Intelligent Centered Object Inspection System Using Crucial Images

2018 ◽  
Vol 5 (1) ◽  
pp. 44-57 ◽  
Author(s):  
Santosh Kumar Sahoo ◽  
B. B. Choudhury
Keyword(s):  
Principal Component ◽  
Cuckoo Search ◽  
Basic Function ◽  
Least Square ◽  
Support Vector ◽  
Inspection System ◽  
Bench Mark ◽  
Test Functions ◽  
Proposed Model ◽  
Object Inspection

This article proposes a unique optimization algorithm like Adaptive Cuckoo Search (AdCS) algorithm followed by an Intrinsic Discriminant Analysis (IDA) to design an intelligent object classifier for inspection of defective object like bottle in a manufacturing unit. By using this methodology the response time is very faster than the other techniques. The projected scheme is authenticated using different bench mark test functions along with an effective inspection procedure for identification of bottle by using AdCS, Principal-Component-Analysis (PCA) and IDA. Due to this the projected procedures terms as PCA+IDA for dimension reduction in addition to this AdCS-IDA for classification or identification of defective bottles. The analyzed response obtained from by an application of AdCS algorithm followed by IDA and compared to other algorithm like Least-Square-Support-Vector-Machine (LSSVM), Linear Kernel Radial-Basic-Function (RBF) to the proposed model, the earlier applied scheme reveals the remarkable performance.

QSAR Study of PARP Inhibitors by GA-MLR, GA-SVM and GA-ANN Approaches

2020 ◽  
Vol 16 (8) ◽  
pp. 1088-1105
Author(s):  
Nafiseh Vahedi ◽  
Majid Mohammadhosseini ◽  
Mehdi Nekoei
Keyword(s):  
Present Report ◽  
Principal Component ◽  
Parp Inhibitors ◽  
Support Vector ◽  
Ann Model ◽  
Statistical Parameters ◽  
Qsar Study ◽  
Data Set ◽  
Test Set ◽  
Non Linear

Background: The poly(ADP-ribose) polymerases (PARP) is a nuclear enzyme superfamily present in eukaryotes. Methods: In the present report, some efficient linear and non-linear methods including multiple linear regression (MLR), support vector machine (SVM) and artificial neural networks (ANN) were successfully used to develop and establish quantitative structure-activity relationship (QSAR) models capable of predicting pEC50 values of tetrahydropyridopyridazinone derivatives as effective PARP inhibitors. Principal component analysis (PCA) was used to a rational division of the whole data set and selection of the training and test sets. A genetic algorithm (GA) variable selection method was employed to select the optimal subset of descriptors that have the most significant contributions to the overall inhibitory activity from the large pool of calculated descriptors. Results: The accuracy and predictability of the proposed models were further confirmed using crossvalidation, validation through an external test set and Y-randomization (chance correlations) approaches. Moreover, an exhaustive statistical comparison was performed on the outputs of the proposed models. The results revealed that non-linear modeling approaches, including SVM and ANN could provide much more prediction capabilities. Conclusion: Among the constructed models and in terms of root mean square error of predictions (RMSEP), cross-validation coefficients (Q2 LOO and Q2 LGO), as well as R2 and F-statistical value for the training set, the predictive power of the GA-SVM approach was better. However, compared with MLR and SVM, the statistical parameters for the test set were more proper using the GA-ANN model.

Application of Machine Learning in Animal Disease Analysis and Prediction

2020 ◽  
Vol 15 ◽  
Author(s):  
Shuwen Zhang ◽  
Qiang Su ◽  
Qin Chen
Keyword(s):  
Machine Learning ◽  
Unsupervised Learning ◽  
Supervised Learning ◽  
Clustering Algorithm ◽  
Principal Component ◽  
Support Vector ◽  
Animal Disease ◽  
Human Beings ◽  
Animal Diseases ◽  
Disease Analysis

Abstract: Major animal diseases pose a great threat to animal husbandry and human beings. With the deepening of globalization and the abundance of data resources, the prediction and analysis of animal diseases by using big data are becoming more and more important. The focus of machine learning is to make computers learn how to learn from data and use the learned experience to analyze and predict. Firstly, this paper introduces the animal epidemic situation and machine learning. Then it briefly introduces the application of machine learning in animal disease analysis and prediction. Machine learning is mainly divided into supervised learning and unsupervised learning. Supervised learning includes support vector machines, naive bayes, decision trees, random forests, logistic regression, artificial neural networks, deep learning, and AdaBoost. Unsupervised learning has maximum expectation algorithm, principal component analysis hierarchical clustering algorithm and maxent. Through the discussion of this paper, people have a clearer concept of machine learning and understand its application prospect in animal diseases.

scholarly journals Transformer Oil Quality Assessment Using Random Forest with Feature Engineering

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1809
Author(s):  
Mohammed El Amine Senoussaoui ◽  
Mostefa Brahami ◽  
Issouf Fofana
Keyword(s):  
Machine Learning ◽  
Random Forest ◽  
Oil Quality ◽  
Principal Component ◽  
Condition Assessment ◽  
Classification Performance ◽  
Transformer Oil ◽  
Classification Model ◽  
Insulation Degradation ◽  
Transformer Oils

Machine learning is widely used as a panacea in many engineering applications including the condition assessment of power transformers. Most statistics attribute the main cause of transformer failure to insulation degradation. Thus, a new, simple, and effective machine-learning approach was proposed to monitor the condition of transformer oils based on some aging indicators. The proposed approach was used to compare the performance of two machine-learning classifiers: J48 decision tree and random forest. The service-aged transformer oils were classified into four groups: the oils that can be maintained in service, the oils that should be reconditioned or filtered, the oils that should be reclaimed, and the oils that must be discarded. From the two algorithms, random forest exhibited a better performance and high accuracy with only a small amount of data. Good performance was achieved through not only the application of the proposed algorithm but also the approach of data preprocessing. Before feeding the classification model, the available data were transformed using the simple k-means method. Subsequently, the obtained data were filtered through correlation-based feature selection (CFsSubset). The resulting features were again retransformed by conducting the principal component analysis and were passed through the CFsSubset filter. The transformation and filtration of the data improved the classification performance of the adopted algorithms, especially random forest. Another advantage of the proposed method is the decrease in the number of the datasets required for the condition assessment of transformer oils, which is valuable for transformer condition monitoring.

scholarly journals Possibility of Human Gender Recognition Using Raman Spectra of Teeth

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3983
Author(s):  
Ozren Gamulin ◽  
Marko Škrabić ◽  
Kristina Serec ◽  
Matej Par ◽  
Marija Baković ◽  
...  
Keyword(s):  
Raman Spectra ◽  
Principal Component ◽  
Support Vector ◽  
Gender Recognition ◽  
Proof Of Concept ◽  
Male And Female ◽  
Tooth Type ◽  
Tooth Apex ◽  
The Difference

Gender determination of the human remains can be very challenging, especially in the case of incomplete ones. Herein, we report a proof-of-concept experiment where the possibility of gender recognition using Raman spectroscopy of teeth is investigated. Raman spectra were recorded from male and female molars and premolars on two distinct sites, tooth apex and anatomical neck. Recorded spectra were sorted into suitable datasets and initially analyzed with principal component analysis, which showed a distinction between spectra of male and female teeth. Then, reduced datasets with scores of the first 20 principal components were formed and two classification algorithms, support vector machine and artificial neural networks, were applied to form classification models for gender recognition. The obtained results showed that gender recognition with Raman spectra of teeth is possible but strongly depends both on the tooth type and spectrum recording site. The difference in classification accuracy between different tooth types and recording sites are discussed in terms of the molecular structure difference caused by the influence of masticatory loading or gender-dependent life events.

scholarly journals Product Inspection Methodology via Deep Learning: An Overview

Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5039
Author(s):  
Tae-Hyun Kim ◽  
Hye-Rin Kim ◽  
Yeong-Jun Cho
Keyword(s):  
Deep Learning ◽  
Product Quality ◽  
Inspection System ◽  
Quality Inspection ◽  
Learning Models ◽  
Unified Framework ◽  
Learning Techniques ◽  
Inspection Systems ◽  
System Maintenance ◽  
Test Scenarios

In this study, we present a framework for product quality inspection based on deep learning techniques. First, we categorize several deep learning models that can be applied to product inspection systems. In addition, we explain the steps for building a deep-learning-based inspection system in detail. Second, we address connection schemes that efficiently link deep learning models to product inspection systems. Finally, we propose an effective method that can maintain and enhance a product inspection system according to improvement goals of the existing product inspection systems. The proposed system is observed to possess good system maintenance and stability owing to the proposed methods. All the proposed methods are integrated into a unified framework and we provide detailed explanations of each proposed method. In order to verify the effectiveness of the proposed system, we compare and analyze the performance of the methods in various test scenarios. We expect that our study will provide useful guidelines to readers who desire to implement deep-learning-based systems for product inspection.

scholarly journals A Methodology Based on FT-IR Data Combined with Random Forest Model to Generate Spectralprints for the Characterization of High-Quality Vinegars

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1411
Author(s):  
José Luis P. Calle ◽  
Marta Ferreiro-González ◽  
Ana Ruiz-Rodríguez ◽  
Gerardo F. Barbero ◽  
José Á. Álvarez ◽  
...  
Keyword(s):  
Random Forest ◽  
Raw Materials ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Raw Material ◽  
Support Vector ◽  
Protected Designation Of Origin ◽  
Ft Ir

Sherry wine vinegar is a Spanish gourmet product under Protected Designation of Origin (PDO). Before a vinegar can be labeled as Sherry vinegar, the product must meet certain requirements as established by its PDO, which, in this case, means that it has been produced following the traditional solera and criadera ageing system. The quality of the vinegar is determined by many factors such as the raw material, the acetification process or the aging system. For this reason, mainly producers, but also consumers, would benefit from the employment of effective analytical tools that allow precisely determining the origin and quality of vinegar. In the present study, a total of 48 Sherry vinegar samples manufactured from three different starting wines (Palomino Fino, Moscatel, and Pedro Ximénez wine) were analyzed by Fourier-transform infrared (FT-IR) spectroscopy. The spectroscopic data were combined with unsupervised exploratory techniques such as hierarchical cluster analysis (HCA) and principal component analysis (PCA), as well as other nonparametric supervised techniques, namely, support vector machine (SVM) and random forest (RF), for the characterization of the samples. The HCA and PCA results present a clear grouping trend of the vinegar samples according to their raw materials. SVM in combination with leave-one-out cross-validation (LOOCV) successfully classified 100% of the samples, according to the type of wine used for their production. The RF method allowed selecting the most important variables to develop the characteristic fingerprint (“spectralprint”) of the vinegar samples according to their starting wine. Furthermore, the RF model reached 100% accuracy for both LOOCV and out-of-bag (OOB) sets.

Sign in / Sign up

Export Citation Format

Share Document