scholarly journals An Iterative Technique for the Synthesis of Active Antenna Oscillator Arrays

2009 ◽  
Vol 2009 ◽  
pp. 1-11 ◽  
Author(s):  
Theodoros N. Kaifas ◽  
John N. Sahalos

A design procedure for the synthesis of a coupled active antenna oscillator array is presented. Such an array is synthesized by deriving two sets of parameters: the radiators' positions and the oscillators' outputs. The outputs are used to excite the radiators. Minimization of the mean square error between the desired pattern and the resulting one is made. Synthesis starts from an initial array, which is perturbed iteratively by varying simultaneously the element excitations and positions. In the iteration, the first variation of the cost function is set equal to zero. The final array results from the last iteration, where the stopping criteria are met. The procedure designs simultaneously both the antenna and the attached coupled oscillator array providing viable solutions. The second by properly configuring the tuning parameters through the use of closed-form formulas. The resulting arrays are shown to comply with the desired pattern and the nonlinear dynamics thus proving the validity of our method.

2019 ◽  
Vol 16 (10) ◽  
pp. 1950155 ◽  
Author(s):  
Paul Bracken

A variational approach is given which can be applied to functionals of a general form to determine a corresponding Euler–Lagrange or shape equation. It is the intention to formulate the theory in detail based on a moving frame approach. It is then applied to a functional of a general form which depends on both the mean and Gaussian curvatures as well as the area and volume elements of the manifold. Only the case of a two-dimensional closed manifold is considered. The first variation of the functional is calculated in terms of the variations of the basic variables of the manifold. The results of the first variation allow for the second variation of the functional to be evaluated.


2018 ◽  
Vol 5 (01) ◽  
Author(s):  
TAPAN K. KHURA ◽  
H. L. KUSHWAHA ◽  
SATISH D LANDE ◽  
PKSAHOO . ◽  
INDRA L . KUSHWAHA

Floriculture is an age-old farming activity in India having immense potential for generating selfemployment and income to farmers. However, the cost of cultivation of flower is high as compared to cereal crop. Level of mechanization for different field operations is one but foremost reason for the higher cost of cultivation. As most of the Indian farmers are marginal and small, a need for manually operated gladiolus planter was felt. The geometric properties of gladiolus corm were determined for designing the seed metering system and seed hopper of the planter. The planter was evaluated in the field when pulled by two persons as a power source and guided by a person. The coefficient of variation and highest deviation from the mean spacing was observed as 12.93% and 2.65cm respectively. The maximum coefficient of uniformity of 90.59% was observed for a nominal corm spacing of 15cm at 0.56 kmh-1 forward speed. An average MISS percentage was observed as 2.65 and 2.25 for nominal corm spacing of 15 and 20 cm. The multiple index was zero for two levels corm spacing and forward speed of operation. The QFI was found in the range of 97.2 and 97.9 percent. The average field capacity of the planter was observed as 0.02 hah-1.The average draft requirement of the planter was found as 821 ± 50.3 N.


Author(s):  
Robert Susło ◽  
Piotr Pobrotyn ◽  
Lidia Brydak ◽  
Łukasz Rypicz ◽  
Urszula Grata-Borkowska ◽  
...  

Introduction: Influenza infection is associated with potential serious complications, increased hospitalization rates, and a higher risk of death. Materials and Methods: A retrospective comparative analysis of selected indicators of hospitalization from the University Hospital in Wroclaw, Poland, was carried out on patients with confirmed influenza infection in comparison to a control group randomly selected from among all other patients hospitalized on the respective wards during the 2018–2019 influenza season. Results: The mean laboratory testing costs for the entire hospital were 3.74-fold higher and the mean imaging test costs were 4.02-fold higher for patients with confirmed influenza than for the control group; the hospital expenses were additionally raised by the cost of antiviral therapy, which is striking when compared against the cost of a single flu vaccine. During the 2018–2019 influenza season, influenza infections among the hospital patients temporarily limited the healthcare service availability in the institution, which resulted in reduced admission rates to the departments related to internal medicine; the mean absence among the hospital staff totaled approximately 7 h per employee, despite 7.3% of the staff having been vaccinated against influenza at the hospital’s expense. Conclusions: There were significant differences in the hospitalization indicators between the patients with confirmed influenza and the control group, which markedly increased the hospital care costs in this multi-specialty university hospital.


1972 ◽  
Vol 9 (02) ◽  
pp. 257-269 ◽  
Author(s):  
J. Gani ◽  
D. Jerwood

This paper is concerned with the cost Cis = aWis + bTis (a, b > 0) of a general stochastic epidemic starting with i infectives and s susceptibles; Tis denotes the duration of the epidemic, and Wis the area under the infective curve. The joint Laplace-Stieltjes transform of (Wis, Tis ) is studied, and a recursive equation derived for it. The duration Tis and its mean Nis are considered in some detail, as are also Wis and its mean Mis . Using the results obtained, bounds are found for the mean cost of the epidemic.


BMJ Open ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. e033979
Author(s):  
Easter Elizabeth Olwanda ◽  
James G Kahn ◽  
Yujung Choi ◽  
Jessica Yasmine Islam ◽  
Megan Huchko

ObjectivesTo estimate the cost of human papillomavirus (HPV)-based screening through community health campaigns (CHCs) and home-based testing.SettingCHCs and home-based testing in six communities in rural Western Kenya.ParticipantsCHCs and home-based screening reached 2297 and 1002 women aged 25–65 years, respectively.Outcome measuresOutcome measures were overall cost per woman screened achieved through the CHCs and home-based testing and the cost per woman for each activity comprising the screening intervention.ResultsThe mean cost per woman screened through CHCs and home-based testing were similar, at $37.7 (range $26.4–$52.0) and $37.1 (range $27.6–$54.0), respectively. For CHCs, personnel represented 49% of overall cost, supplies 25%, services 5% and capital goods 23%. For home-based testing, these were: personnel 73%, supplies 25%, services 1% and capital goods 2%. A greater number of participants was associated with a lower cost per participant.ConclusionsThe mean cost per woman screened is comparable for CHC and home-based testing, with differences in type of input. The CHCs generally reached more eligible women in the six communities, whereas home-based strategies more efficiently reached populations with low screening rates.Trial registration numberNCT02124252.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Chiara Guidi ◽  
Ali Maalaoui ◽  
Vittorio Martino

AbstractWe consider the coupled system given by the first variation of the conformal Dirac–Einstein functional. We will show existence of solutions by means of perturbation methods.


1990 ◽  
Vol 27 (01) ◽  
pp. 134-145
Author(s):  
Matthias Fassbender

This paper establishes the existence of an optimal stationary strategy in a leavable Markov decision process with countable state space and undiscounted total reward criterion. Besides assumptions of boundedness and continuity, an assumption is imposed on the model which demands the continuity of the mean recurrence times on a subset of the stationary strategies, the so-called ‘good strategies'. For practical applications it is important that this assumption is implied by an assumption about the cost structure and the transition probabilities. In the last part we point out that our results in general cannot be deduced from related works on bias-optimality by Dekker and Hordijk, Wijngaard or Mann.


2019 ◽  
Vol 70 (1) ◽  
pp. 26-29 ◽  
Author(s):  
Tinevimbo Shiri ◽  
Angela Loyse ◽  
Lawrence Mwenge ◽  
Tao Chen ◽  
Shabir Lakhi ◽  
...  

Abstract Background Mortality from cryptococcal meningitis remains very high in Africa. In the Advancing Cryptococcal Meningitis Treatment for Africa (ACTA) trial, 2 weeks of fluconazole (FLU) plus flucytosine (5FC) was as effective and less costly than 2 weeks of amphotericin-based regimens. However, many African settings treat with FLU monotherapy, and the cost-effectiveness of adding 5FC to FLU is uncertain. Methods The effectiveness and costs of FLU+5FC were taken from ACTA, which included a costing analysis at the Zambian site. The effectiveness of FLU was derived from cohorts of consecutively enrolled patients, managed in respects other than drug therapy, as were participants in ACTA. FLU costs were derived from costs of FLU+5FC in ACTA, by subtracting 5FC drug and monitoring costs. The cost-effectiveness of FLU+5FC vs FLU alone was measured as the incremental cost-effectiveness ratio (ICER). A probabilistic sensitivity analysis assessed uncertainties and a bivariate deterministic sensitivity analysis examined the impact of varying mortality and 5FC drug costs on the ICER. Results The mean costs per patient were US $847 (95% confidence interval [CI] $776–927) for FLU+5FC, and US $628 (95% CI $557–709) for FLU. The 10-week mortality rate was 35.1% (95% CI 28.9–41.7%) with FLU+5FC and 53.8% (95% CI 43.1–64.1%) with FLU. At the current 5FC price of US $1.30 per 500 mg tablet, the ICER of 5FC+FLU versus FLU alone was US $65 (95% CI $28–208) per life-year saved. Reducing the 5FC cost to between US $0.80 and US $0.40 per 500 mg resulted in an ICER between US $44 and US $28 per life-year saved. Conclusions The addition of 5FC to FLU is cost-effective for cryptococcal meningitis treatment in Africa and, if made available widely, could substantially reduce mortality rates among human immunodeficiency virus–infected persons in Africa.


2007 ◽  
Vol 38 (7) ◽  
pp. 11-17
Author(s):  
Ronald M. Aarts

Conventionally, the ultimate goal in loudspeaker design has been to obtain a flat frequency response over a specified frequency range. This can be achieved by carefully selecting the main loudspeaker parameters such as the enclosure volume, the cone diameter, the moving mass and the very crucial “force factor”. For loudspeakers in small cabinets the results of this design procedure appear to be quite inefficient, especially at low frequencies. This paper describes a new solution to this problem. It consists of the combination of a highly non-linear preprocessing of the audio signal and the use of a so called low-force-factor loudspeaker. This combination yields a strongly increased efficiency, at least over a limited frequency range, at the cost of a somewhat altered sound quality. An analytically tractable optimality criterion has been defined and has been verified by the design of an experimental loudspeaker. This has a much higher efficiency and a higher sensitivity than current low-frequency loudspeakers, while its cabinet can be much smaller.


2003 ◽  
Vol 94 (5) ◽  
pp. 1766-1772 ◽  
Author(s):  
Jinger S. Gottschall ◽  
Rodger Kram

We reasoned that with an optimal aiding horizontal force, the reduction in metabolic rate would reflect the cost of generating propulsive forces during normal walking. Furthermore, the reductions in ankle extensor electromyographic (EMG) activity would indicate the propulsive muscle actions. We applied horizontal forces at the waist, ranging from 15% body weight aiding to 15% body weight impeding, while subjects walked at 1.25 m/s. With an aiding horizontal force of 10% body weight, 1) the net metabolic cost of walking decreased to a minimum of 53% of normal walking, 2) the mean EMG of the medial gastrocnemius (MG) during the propulsive phase decreased to 59% of the normal walking magnitude, and yet 3) the mean EMG of the soleus (Sol) did not decrease significantly. Our data indicate that generating horizontal propulsive forces constitutes nearly half of the metabolic cost of normal walking. Additionally, it appears that the MG plays an important role in forward propulsion, whereas the Sol does not.


Sign in / Sign up

Export Citation Format

Share Document