scholarly journals Adsorption of Ni(II), Cu(II) and Fe(III) from Aqueous Solutions Using Activated Carbon

2008 ◽  
Vol 5 (1) ◽  
pp. 1-9 ◽  
Author(s):  
A. Edwin Vasu
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Metal Ion ◽  
Transition Metal Ions ◽  
Batch Mode ◽  
Liquid Phase Adsorption ◽  
Physical Chemical ◽  
Standard Procedures ◽  
Adsorption Data ◽  
Pseudo Second Order

An activated carbon was tested for its ability to remove transition metal ions from aqueous solutions. Physical, Chemical and liquid-phase adsorption characterizations of the carbon were done following standard procedures. Studies on the removal of Ni(II), Cu(II) and Fe(III) ions were attempted by varying adsorbate dose, pH of the metal ion solution and time in batch mode. The equilibrium adsorption data were fitted with Freundlich, Langmuir and Redlich-Peterson isotherms and the isotherm constants were evaluated. Time variation studies indicate that adsorptions follow pseudo-second order kinetics. pH was found to have a significant role to play in the adsorption. The processes were endothermic and the thermodynamic parameters were evaluated. Desorption studies indicate that ion-exchange mechanism is operating.

scholarly journals Ricinus CommunisPericarp Activated Carbon Used as an Adsorbent for the Removal of Ni(II) From Aqueous Solution

2008 ◽  
Vol 5 (4) ◽  
pp. 761-769 ◽  
Author(s):  
S. Madhavakrishnan ◽  
K. Manickavasagam ◽  
K. Rasappan ◽  
P. S. Syed Shabudeen ◽  
R. Venkatesh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Activated Carbon ◽  
Contact Time ◽  
Metal Ion ◽  
Ricinus Communis ◽  
Ion Concentration ◽  
Batch Mode ◽  
Adsorption Data ◽  
Initial Ph

Activated carbon prepared from Ricinus communis Pericarp was used to remove Ni(II) from aqueous solution by adsorption. Batch mode adsorption experiments are carried out by varying contact time, metal-ion concentration, carbon concentration and pH to assess kinetic and equilibrium parameters. The adsorption data were modeled by using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity (Qo) calculated from the Langmuir isotherm was 31.15 mg/g of activated carbon at initial pH of 5.0±0.2 for the particle size 125-250 µm.

scholarly journals Adsorption Behaviour of La(III) and Eu(III) Ions from Aqueous Solutions by Hydroxyapatite: Kinetic, Isotherm, and Thermodynamic Studies

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
F. Granados-Correa ◽  
J. Vilchis-Granados ◽  
M. Jiménez-Reyes ◽  
L. A. Quiroz-Granados
Keyword(s):  
Aqueous Solutions ◽  
Metal Ion ◽  
Low Cost ◽  
Intraparticle Diffusion ◽  
Ion Concentration ◽  
Adsorption Behaviour ◽  
Freundlich Model ◽  
Adsorption Data ◽  
Isotherm Adsorption ◽  
Pseudo Second Order

The hydroxyapatite was successfully synthesized, characterized, and used as an alternative low-cost adsorbent material to study the adsorption behavior of La(III) and Eu(III) ions from nitrate aqueous solutions as a function of contact time, initial metal ion concentration, pH, and temperature by using a bath technique. The kinetic data correspond very well to the pseudo-second-order equation, and in both cases the uptake was affected by intraparticle diffusion. Isotherm adsorption data were well fitted by the Freundlich model equation with1/n>1, indicating a multilayer and cooperative-type adsorption. Thermodynamic parameters for the adsorption systems were determinated at 293, 303, 313, and 323 K. These parameters show that adsorptions of La(III) and Eu(III) ions on hydroxyapatite are endothermic and spontaneous processes. The adsorption was found to follow the order Eu(III) > La(III) and is dependent on ion concentration, pH, and temperature.

scholarly journals Adsorption properties of a nanostructured hybrid material containing aluminium towards some metal ions

2011 ◽  
Vol 9 (5) ◽  
pp. 932-940 ◽  
Author(s):  
Albena Detcheva ◽  
Paunka Vassileva ◽  
Ralitsa Georgieva ◽  
Dimitrinka Voykova ◽  
Tsvetelina Gerganova ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Hybrid Material ◽  
Metal Ion ◽  
Ph Value ◽  
Sol Gel ◽  
Transition Metal Ions ◽  
Adsorption Properties ◽  
Adsorption Of Nitrogen ◽  
Pseudo Second Order

AbstractIn the present work the adsorption of some transition metal ions from aqueous solutions on a silica-based nanostructured hybrid material modified by aluminium was investigated. The novel organic-inorganic material was synthesized via a sol-gel method through hydrolysis and co-condensation reactions. Its structure was characterized by means of SEM, XRD and FTIR. Based on the data obtained the most probable cross-linking mechanism for the derived xerogel was proposed. The characterization of its texture parameters was carried out by low-temperature adsorption of nitrogen. The adsorption properties of this material with respect to Cu(II), Cr(III) and Pb(II) ions from single-component aqueous solutions and multi-component aqueous solutions containing also Cd(II) and Fe(III) were evaluated. The effect of contact time, acidity of initial solutions and metal ion concentrations was investigated using the batch method. Pseudo-first order, pseudo-second order and intraparticle diffusion models were used to analyze kinetic data. In all cases the adsorption was significantly affected by the pH value. Equilibrium modelling data were fitted to linear Langmuir, Freundlich and Dubinin-Radushkevich models. Best fit was observed for Langmuir model, which showed determination coefficients greater than 0.992 for all ions studied. The maximum adsorption capacities for single- and multi-component adsorption were calculated.

scholarly journals Removal of Phenol ando-Cresol by Adsorption onto Activated Carbon

2008 ◽  
Vol 5 (2) ◽  
pp. 224-232 ◽  
Author(s):  
A. Edwin Vasu
Keyword(s):  
Activated Carbon ◽  
Kinetic Studies ◽  
Batch Mode ◽  
Phenol Solution ◽  
Adsorption Capacities ◽  
Monolayer Adsorption ◽  
Adsorption Data ◽  
Pseudo Second Order ◽  
Dilute Aqueous Solutions ◽  
Isotherm Equations

A commercial activated carbon was utilized for the adsorptive removal of phenol and o-cresol from dilute aqueous solutions. Batch mode adsorption studies were performed by varying parameters such as concentration of phenol solution, time, pH and temperature. The well known Freundlich, Langmuir and Redlich-Peterson isotherm equations were applied for the equilibrium adsorption data and the various isotherm parameters were evaluated. The Langmuir monolayer adsorption capacities were found to be 0.7877 and 0.5936 mmole/g, respectively, for phenol and o-cresol. Kinetic studies performed indicate that the sorption processes can be better represented by the pseudo-second order kinetics. The processes were found to be endothermic and the thermodynamic parameters were evaluated. Desorption studies performed indicate that the sorbed phenol molecules can be desorbed with dil. HCl.

scholarly journals Comparative studies on the removal of copper (II) by Ulva fasciata activated carbon and commercially activated carbon

2012 ◽  
Vol 14 (4) ◽  
pp. 88-94 ◽  
Author(s):  
R.P. Suresh Jeyakumar ◽  
V. Chandrasekaran
Keyword(s):  
Activated Carbon ◽  
Activated Carbons ◽  
Synthetic Wastewater ◽  
Batch Adsorption ◽  
First Order ◽  
Ulva Fasciata ◽  
Adsorption Data ◽  
Pseudo Second Order ◽  
Pseudo First Order ◽  
Adsorbent Dose

Abstract In this work, the efficiency of Ulva fasciata sp. activated carbons (CCUC, SCUC and SSUC) and commercially activated carbon (CAC) were studied for the removal of Cu (II) ions from synthetic wastewater. Batch adsorption experiments were carried out as a function of pH, contact time, initial copper concentration and adsorbent dose. The percentage adsorption of copper by CCUC, SSUC, SCUC and CAC are 88.47%, 97.53%, 95.78% and 77.42% respectively. Adsorption data were fitted with the Langmuir, Freundlich and Temkin models. Two kinetic models pseudo first order and the pseudo second order were selected to interpret the adsorption data.

Reduction of COD from Micro-Polluted Water through Adsorption of Activated Carbon-Attapulgite Composite Adsorbent

2010 ◽  
Vol 450 ◽  
pp. 445-448
Author(s):  
Zheng Wang ◽  
Zhao Qian Jing ◽  
Yu Kong ◽  
Wei Shen
Keyword(s):  
Activated Carbon ◽  
Oxygen Demand ◽  
Polluted Water ◽  
Adsorption Model ◽  
Batch Mode ◽  
Composite Adsorbent ◽  
Adsorption Data ◽  
Complete Study ◽  
Ph Range ◽  
Optimum Ph Range

The aim of this study was the assessment of reduction of chemical oxygen demand (COD) from micro-polluted water using activated carbon-attapulgite composite adsorbent prepared using activated carbon and natural attapulgite through compounding, granulation and calcination. The complete study was done in batch mode to investigate the effect of operating parameters. Adsorption of COD was found to be dependent on contact time, pH, temperature and initial COD concentration. Adsorption equilibrium attained within 80 minutes time. The optimum pH range for adsorption of organics was found to be 8. The sorption of organics decreased with rise of temperature because adsorption process was exothermic. The studied adsorption data fitted well to Langmuir adsorption model with the correlation coefficient 0.9947. The activated carbon-attapulgite composite adsorbent in this study shows very good promise for practical applicability on removal of COD from micro-polluted water.

scholarly journals Adsorption of Copper Ions (Cu++) in Aqueous Solution Using Activated Carbon and Biosorbent from Indian Jujube (Ziziphus mauritiana) Seed Hulls

2020 ◽  
pp. 13-24
Author(s):  
Harouna Massai ◽  
Djakba Raphael ◽  
Mouhamadou Sali
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Copper Ions ◽  
Carbon Powder ◽  
Ziziphus Mauritiana ◽  
Batch Mode ◽  
Freundlich Model ◽  
Jar Test ◽  
Standard Procedures ◽  
Indian Jujube

The present work aimed at mitigating the level of copper ions (Cu++) by adsorption in aqueous solution using activated carbon powder (AC) and biosorbent (BS) from the Indian jujube seed hulls. The AC and BS were prepared from the Indian jujube seed hulls and characterized    using standard procedures. In addition, the adsorption effects of Indian jujube seed hulls through the AC and BS were carried out using jar test experiment (batch mode) at different pH (1, 2, 3, and 4), ionic strengths (100-600 mg/L) and stirring speed (120rpm). Therefore, it was found that the adsorption time at equilibrium were 10 and 5 minutes respectively for the AC and the BS.  Furthermore, it was found that the reduction of copper ions were 99.40% and 73.08% for aqueous solutions of 100 ppm and 500 ppm respectively at the equilibrium state. It was also revealed that when the mass of the AC or the BS increases, the quantities of ions adsorbed per gram decrease. The maximum pH of adsorption for the AC was found to be pH=1, while it was found to be pH=4 for the BS. The Freundlich model indicated that the adsorption of copper ions by the Indian jujube is linear while the Temkin and Dubinin-Kagana-Radushkevich models described the adsorption as a physical reaction. It was finally observed that the adsorption of copper ions by the AC and the BS from Indian jujube seed hulls influenced by the addition of some concentration of NaCl.

scholarly journals Adsorption Study of Cu2+ Ions from Aqueous Solutions by Bael Flowers (Aegle marmelos)

2020 ◽  
Vol 11 (4) ◽  
pp. 11891-11904
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Metal Ion ◽  
Low Cost ◽  
Sem Analysis ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Aegle Marmelos ◽  
Batch Mode ◽  
Initial Ph

In the present study, batch mode adsorption was carried out to investigate the adsorption capacity of dried bael flowers (Aegle marmelos) for the adsorptive removal of Cu(II) ions from aqueous solutions by varying agitation time, initial metal concentration, the dose of adsorbent, temperature, and initial pH of the Cu(II) ion solution. The percentage removal of 98.7% was observed at 50 ppm initial metal ion concentration, 0.5 g/100.00 cm3 adsorbent dosage, within the contact time of 120 minutes at 30 ºC in the pH range of 4 – 7. The sorption processes of Cu(II) ions was best described by pseudo-second-order kinetics. Langmuir isotherm had a good fit with the experimental data with 0.97 of correlation coefficient (R2), and the maximum adsorption capacity obtained was 23.14 mg g-1 at 30 ºC. The results obtained from sorption thermodynamic studies suggested that the adsorption process is exothermic and spontaneous. SEM analysis showed tubular voids on the adsorbent. FTIR studies indicated the presence of functional groups like hydroxyl, –C-O, –C=O, and amide groups in the adsorbent, which can probably involve in metal ion adsorption. Therefore, dried bael flowers can be considered an effective low-cost adsorbent for treating Cu(II) ions.

Chelating modified cellulose bearing pendant heterocyclic moiety for effective removal of heavy metals

2019 ◽  
Vol 80 (8) ◽  
pp. 1549-1561
Author(s):  
R. Saravanan ◽  
R. Mahalakshmi ◽  
M. S. Karthikeyan ◽  
L. Ravikumar
Keyword(s):  
Metal Ion ◽  
Ion Concentration ◽  
Batch Mode ◽  
Effective Removal ◽  
Removal Of Heavy Metals ◽  
Intra Particle Diffusion ◽  
Functional Factors ◽  
Pseudo Second Order ◽  
Heterocyclic Moiety ◽  
Maximum Removal

Abstract Cellulose bearing pendant Schiff base with heterocyclic chelating groups (CMC-Bz) was synthesized, which were fully characterized using various instrumental techniques such as solid state carbon-13 nuclear magnetic resonance (13C-NMR), Fourier transform infrared (FTIR), scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDX) spectra. The adsorption of toxic metals onto cellulosic material was tested in a batch mode operation. The adsorption functional factors such as pH, adsorbent dose, metal ion concentration, equilibrium time and temperature were experimentally optimized for the maximum removal of Cu(II) and Pb(II) ions. Adsorption isotherms were evaluated with Langmuir, Freundlich, Temkin and Redlich–Peterson isotherms. Kinetic parameters and equilibrium adsorption capacities were investigated for pseudo-first-order, pseudo-second-order and intra-particle diffusion models. Thermodynamic parameters and reusability were also evaluated.

Removal of dyes from aqueous solutions using activated carbon prepared from rice husk residue

2015 ◽  
Vol 73 (5) ◽  
pp. 1122-1128 ◽  
Author(s):  
Yaxin Li ◽  
Xian Zhang ◽  
Ruiguang Yang ◽  
Guiying Li ◽  
Changwei Hu
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Rice Husk ◽  
Dye Removal ◽  
Neutral Red ◽  
Batch Adsorption ◽  
Dye Wastewater ◽  
Dye Molecules ◽  
Major Mode ◽  
Pseudo Second Order

The treatment of dye wastewater by activated carbon (AC) prepared from rice husk residue wastes was studied. Batch adsorption studies were conducted to investigate the effects of contact time, initial concentration (50–450 mg/L), pH (3–11) and temperature (30–70 °C) on the removal of methylene blue (MB), neutral red, and methyl orange. Kinetic investigation revealed that the adsorption of dyes followed pseudo-second-order kinetics. The results suggested that AC was effective to remove dyes, especially MB, from aqueous solutions. Desorption studies found that chemisorption by the adsorbent might be the major mode of dye removal. Fourier transform infrared results suggested that dye molecules were likely to combine with the O–H and P=OOH groups of AC.

Sign in / Sign up

Export Citation Format

Share Document