scholarly journals Effect of Etching Parameter on Pore Size and Porosity of Electrochemically Formed Nanoporous Silicon

2007 ◽  
Vol 2007 ◽  
pp. 1-4 ◽  
Author(s):  
Pushpendra Kumar ◽  
Patrick Huber
Keyword(s):  
Pore Diameter ◽  
Crystalline Silicon ◽  
Electrochemical Etching ◽  
Sorption Isotherms ◽  
Electrochemical Process ◽  
Applied Current ◽  
Average Pore ◽  
Nanoporous Silicon ◽  
Applied Current Density ◽  
Precise Control

The most common fabrication technique of porous silicon (PS) is electrochemical etching of a crystalline silicon wafer in a hydrofluoric (HF) acid-based solution. The electrochemical process allows for precise control of the properties of PS such as thickness of the porous layer, porosity, and average pore diameter. The control of these properties of PS was shown to depend on the HF concentration in the used electrolyte, the applied current density, and the thickness of PS. The change in pore diameter, porosity, and specific surface area of PS was investigated by measuring nitrogen sorption isotherms.

scholarly journals Effect of HF Concentration on Physical and Electronic Properties of Electrochemically Formed Nanoporous Silicon

2009 ◽  
Vol 2009 ◽  
pp. 1-7 ◽  
Author(s):  
Pushpendra Kumar ◽  
Peter Lemmens ◽  
Manash Ghosh ◽  
Frank Ludwig ◽  
Meinhard Schilling
Keyword(s):  
Porous Silicon ◽  
Electronic Properties ◽  
Pore Diameter ◽  
Crystalline Silicon ◽  
Electrochemical Etching ◽  
Electrochemical Process ◽  
Average Pore ◽  
Precise Control ◽  
Visual Color ◽  
Photoluminescence Peak

The most common fabrication technique of porous silicon (PS) is electrochemical etching of a crystalline silicon wafer in a hydrofluoric (HF) acid-based solution. The electrochemical process allows for precise control of the properties of PS such as thickness of the porous layer, porosity, and average pore diameter. The effect of HF concentration in the used electrolyte on physical and electronic properties of PS was studied by visual color observation, measuring nitrogen sorption isotherm, field emission type scanning electron microscopy, Raman spectroscopy, and photoluminescence spectroscopy. It was found that with decrease in HF concentration, the pore diameter increased. The PS sample with large pore diameter, that is, smaller nanocrystalline size of Si between the pores, was found to lead to a pronounced photoluminescence peak. The systematic rise of photoluminescence peak with increase of pore diameter and porosity of PS was attributed to quantum confinement. The changes in nanocrystalline porous silicon were also clearly observed by an asymmetric broadening and shift of the optical silicon phonons in Raman spectra. The change in electronic properties of PS with pore diameter suggests possibilities of use of PS material as a template for fundamental physics as well as an optical material for technological applications.

scholarly journals Responsivity of porous silicon for blue visible light with high sensitivity

2018 ◽  
Vol 16 (37) ◽  
pp. 98-107 ◽  
Author(s):  
Iftikhar M. Ali
Keyword(s):  
Porous Silicon ◽  
Blue Light ◽  
Current Density ◽  
Crystalline Silicon ◽  
Electrochemical Etching ◽  
Etching Time ◽  
Light Illumination ◽  
Average Pore ◽  
Zero Bias ◽  
P Type

In this work, porous silicon (PS) are fabricated using electrochemical etching (ECE) process for p-type crystalline silicon (c-Si) wafers of (100) orientation. The structural, morphological and electrical properties of PS synthesized at etching current density of (10, 20, 30) mA/cm2 at constant etching time 10 min are studied. From X-ray diffraction (XRD) measurement, the value of FWHM is in general decreases with increasing current density for p-type porous silicon (p-PS). Atomic force microscope (AFM) showed that for p-PS the average pore diameter decreases at 20 mA. Porous silicon which formed on silicon will be a junction so I-V characteristics have been studied in the dark to calculate ideality factor (n), and saturation current (Is) for these junctions. These junctions are used in photo sensors applications, where the photo sensors have been examined at blue light region. Sensitivity, rise and fall times have been calculated for this wavelength, the maximum value for sensitivity is (3797.6 %) at etching current density 10 mA/cm2 under blue light illumination at zero bias voltage.

Preparation of Porous Silicon and Effect of Gettering on the Resistivity

2012 ◽  
Vol 476-478 ◽  
pp. 1794-1797 ◽  
Author(s):  
Su Xia Guo ◽  
Yi Tan ◽  
Jia Yan Li ◽  
Ya Qiong Li ◽  
Chen Guang Liu
Keyword(s):  
Porous Silicon ◽  
Raman Spectra ◽  
Pore Diameter ◽  
Crystalline Silicon ◽  
Electrochemical Etching ◽  
Silicon Layer ◽  
Porous Silicon Layer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

The porous silicon layer was fabricated by electrochemical etching process using an aqueous HF-based electrolyte. The characterizations of porous silicon layer were investigated by Emission-type scanning electron microscope (SEM), Raman spectra and X-ray diffraction (XRD). With the current density increasing, the pore diameter and density become much bigger. This result also was confirmed by Raman spectra and XRD result of samples, which revealed the decreasing of grain size of silicon. The resistivity of crystalline silicon increased when the porous layer was removed after heat treatment at 850°C for 2.5h, which should be attributed to the gettering process of porous silicon.

scholarly journals Synthesis and Fabrication of In2O3: CdO Nanoparticles for NO2 Gas Sensor

2018 ◽  
Vol 15 (3) ◽  
pp. 292-299
Author(s):  
Baghdad Science Journal
Keyword(s):  
Gas Sensor ◽  
Pore Diameter ◽  
Electrochemical Etching ◽  
Morphological Characteristics ◽  
Etching Time ◽  
Gas Sensitivity ◽  
Average Pore ◽  
No2 Gas Sensor ◽  
Cdo Nanoparticles ◽  
Si Wafer

The physical and morphological characteristics of porous silicon (PS) synthesized via gas sensor was assessed by electrochemical etching for a Si wafer in diluted HF acid in water (1:4) at different etching times and different currents. The morphology for PS wafers by AFM show that the average pore diameter varies from 48.63 to 72.54 nm with increasing etching time from 5 to 15min and from 72.54 to 51.37nm with increasing current from 10 to 30 mA. From the study, it was found that the gas sensitivity of In2O3: CdO semiconductor, against NO2 gas, directly correlated to the nanoparticles size, and its sensitivity increases with increasing operating temperature.

Fuels Desulphurisation by Adsorbtion on Fe / Bentonite

2017 ◽  
Vol 68 (3) ◽  
pp. 483-486
Author(s):  
Constantin Sorin Ion ◽  
Mihaela Bombos ◽  
Gabriel Vasilievici ◽  
Dorin Bombos
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Pore Volume ◽  
Pore Diameter ◽  
Adsorption Process ◽  
Continuous System ◽  
Gas Oil ◽  
Average Pore ◽  
Atmospheric Distillation

Desulfurisation of atmospheric distillation gasoline and gas oil was performed by adsorption process on Fe/ bentonite. The adsorbent was characterized by determining the adsorption isotherms, specific surface area, pore volume and average pore diameter. Adsorption experiments of atmospheric distillation gasoline and gas oil were performed in continuous system at 280�320oC, 5 atm and volume hourly space velocities of 1�2 h-1. The efficiency of adsorption on Fe / bentonite was better at desulphurisation of gasoline versus gas oil.

scholarly journals Photocatalytic activity of Pr-modified TiO2 for the degradation of bisphenol A

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Denise S. Cordeiro ◽  
Fernando L. Cassio ◽  
Larissa Ciccotti ◽  
Thiago L. R. Hewer ◽  
Paola Corio ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Bisphenol A ◽  
Pore Diameter ◽  
Sol Gel ◽  
Bandgap Energy ◽  
Photocatalytic Efficiency ◽  
Average Pore ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Adsorption Desorption

AbstractPraseodymium doped TiO2 nanoparticles were successfully prepared by the sol–gel method and characterized by X-ray powder diffraction, N2 adsorption–desorption isotherm, and UV–vis spectroscopy. The effects of the dopant on the crystallite size, specific surface area, average pore diameter, pore volume, and bandgap energy were investigated. The photocatalytic activity of the catalysts was evaluated by bisphenol A degradation and mineralization, which is a representative endocrine disruptor. Furthermore, under visible light irradiation the Pr-modified TiO2 photocatalysts exhibited higher photocatalytic efficiency than unmodified TiO2. When praseodymium was loaded (1.0–5.0%) onto the surface of TiO2, the rates of degradation and mineralization were increased 3–5 times.

Diffusion of Heavy Oil in SiO2 Model Catalyst and FCC Catalyst

2012 ◽  
Vol 550-553 ◽  
pp. 158-163 ◽  
Author(s):  
Zi Yuan Liu ◽  
Sheng Li Chen ◽  
Peng Dong ◽  
Xiu Jun Ge
Keyword(s):  
Diffusion Coefficient ◽  
Pore Size ◽  
Effective Diffusion Coefficient ◽  
Pore Diameter ◽  
Effective Diffusion ◽  
Model Catalyst ◽  
Average Pore ◽  
Diffusion Factor ◽  
Fcc Catalyst ◽  
Fcc Catalysts

Through the measured effective diffusion coefficients of Dagang vacuum residue supercritical fluid extraction and fractionation (SFEF) fractions in FCC catalysts and SiO2model catalysts, the relation between pore size of catalyst and effective diffusion coefficient was researched and the restricted diffusion factor was calculated. The restricted diffusion factor in FCC catalysts is less than 1 and it is 1~2 times larger in catalyst with polystyrene (PS) template than in conventional FCC catalyst without template, indicating that the diffusion of SFEF fractions in the two FCC catalysts is restricted by the pore. When the average molecular diameter is less than 1.8 nm, the diffusion of SFEF fractions in SiO2model catalyst which average pore diameter larger than 5.6 nm is unrestricted. The diffusion is restricted in the catalyst pores of less than 8 nm for SFEF fractions which diameter more than 1.8 nm. The tortuosity factor of SiO2model catalyst is obtained to be 2.87, within the range of empirical value. The effective diffusion coefficient of the SFEF fractions in SiO2model catalyst is two orders of magnitude larger than that in FCC catalyst with the same average pore diameter. This indicate that besides the ratio of molecular diameter to the pore diameter λ, the effective diffusion coefficient is also closely related to the pore structure of catalyst. Because SiO2model catalyst has uniform pore size, the diffusion coefficient can be precisely correlated with pore size of catalyst, so it is a good model material for catalyst internal diffusion investigation.

Pore Structure and Mechanical Properties of ZrC/SiC Multi-Components Modified C/C Composites

2013 ◽  
Vol 833 ◽  
pp. 159-164 ◽  
Author(s):  
Xiu Qian Li ◽  
Hai Peng Qiu ◽  
Jian Jiao
Keyword(s):  
Mechanical Properties ◽  
Pore Diameter ◽  
Testing Machine ◽  
Average Pore Diameter ◽  
Flexural Properties ◽  
Matrix Interface ◽  
Polymeric Precursor ◽  
Average Pore ◽  
Fiber Matrix Interface ◽  
Injection Apparatus

The ZrC/SiC multi-components modified C/C composites were prepared by using a hybrid precursor containning polycarbosilane and organic zirconium-contained polymeric precursor as impregnant and C/C composites of low density as preform. The porosity, microstructure and mechanical properties of samples were characterized with mercury injection apparatus, scanning electron microscopy and universal electron testing machine respectively. The results show that the porosity and average pore diameter decrease firstly and increase subsequently with the increase of organic zirconium content of the precursor. When the content of organic zirconium is 50%, the porosity and average pore diameter reach minimum which were7.27% and 0.0795um respectively. The most probabilistic pore diameter shifted from 10-100um to 1-10um at the same time; Meanwhile, the flexural properties also increases and drops immediately as the content of organic zirconium in the precursor adds. When the content of organic zirconium is 25%, the flexural strength reaches maximum of 245.20MPa.The improved flexural properties is attributed to the proper bonding of fiber-matrix interface and the low porosity of samples.

Hydrothermal Synthesis of Nanorods/Nanoparticles TiO2 for Photocatalytic Activity and Dye-sensitized Solar Cell Applications

2006 ◽  
Vol 951 ◽  
Author(s):  
Sorapong Pavasupree ◽  
Supachai Ngamsinlapasathian ◽  
Yoshikazu Suzuki ◽  
Susumu Yoshikawa
Keyword(s):  
Photocatalytic Activity ◽  
Surface Area ◽  
Pore Diameter ◽  
Mesoporous Structure ◽  
Energy Conversion Efficiency ◽  
Bet Surface Area ◽  
Average Pore ◽  
Dye Sensitized ◽  
Prepared Material ◽  
20 Nm

ABSTRACTNanorods/nanoparticles TiO2 with mesoporous structure were synthesized by hydrothermal method at 150 °C for 20 h. The samples characterized by XRD, SEM, TEM, SAED, HRTEM, and BET surface area. The nanorods had diameter about 10-20 nm and the lengths of 100-200 nm, the nanoparticles had diameter about 5-10 nm. The prepared material had average pore diameter about 7-12 nm. The BET surface area and pore volume of the sample are about 203 m2/g and 0.655 cm3/g, respectively. The nanorods/nanoparticles TiO2 with mesoporous structure showed higher photocatalytic activity (I3− concentration) than the nanorods TiO2, nanofibers TiO2, mesoporous TiO2, and commercial TiO2 (ST-01, P-25, JRC-01, and JRC-03). The solar energy conversion efficiency (η) of the cell using nanorods/nanoparticles TiO2 with mesoporous structure was about 7.12 % with Jsc of 13.97 mA/cm2, Voc of 0.73 V and ff of 0.70; while η of the cell using P-25 reached 5.82 % with Jsc of 12.74 mA/cm2, Voc of 0.704 V and ff of 0.649.

Sign in / Sign up

Export Citation Format

Share Document