scholarly journals Evaluation of the Methods for Response Analysis under Non-Stationary Excitation

1999 ◽  
Vol 6 (5-6) ◽  
pp. 285-297 ◽  
Author(s):  
R.S. Jangid ◽  
T.K. Datta
Keyword(s):  
Soil Structure ◽  
Solution Procedure ◽  
The Other ◽  
Soil Structure Interaction ◽  
Response Analysis ◽  
Single Degree Of Freedom ◽  
Structure Interaction ◽  
Sdof System ◽  
Single Degree ◽  
Stationary Analysis

Response of structures to non-stationary ground motion can be obtained either by the evolutionary spectral analysis or by the Markov approach. In certain conditions, a quasi-stationary analysis can also be performed. The first two methods of analysis are difficult to apply for complex situations such as problems involving soil-structure interaction, non-classical damping and primary-secondary structure interaction. The quasi-stationary analysis, on the other hand, provides an easier solution procedure for such cases. Here-in, the effectiveness of the quasi-stationary analysis is examined with the help of the analysis of a single degree-of-freedom (SDOF) system under a set of parametric variations. For this purpose, responses of the SDOF system to uniformly modulated non-stationary random ground excitation are obtained by the three methods and they are compared. In addition, the relative computational efforts for different methods are also investigated.

scholarly journals Evaluation of Soil–Structure Interaction in Structure Models via Shaking Table Test

2021 ◽  
Vol 13 (9) ◽  
pp. 4995
Author(s):  
Seongnoh Ahn ◽  
Gun Park ◽  
Hyungchul Yoon ◽  
Jae-Hyeok Han ◽  
Jongwon Jung
Keyword(s):  
Numerical Analysis ◽  
Soil Structure ◽  
Degrees Of Freedom ◽  
Degree Of Freedom ◽  
Shaking Table ◽  
Soil Structure Interaction ◽  
Single Degree Of Freedom ◽  
Structure Interaction ◽  
Multiple Degrees Of Freedom ◽  
Single Degree

Modeling the soil–structure interaction (SSI) in seismic design involves the use of soil response curves for single-degree-of-freedom (SDOF) structures; however, real structures have multiple degrees of freedom (MDOF). In this study, shaking-table-derived p-y curves for SDOF and MDOF superstructures were compared using numerical analysis. It was found that an MDOF structure experienced less displacement than an SDOF structure of the same weight, but the effect of increasing the DOF decreased at greater pile depths. Numerical analysis results estimated using the natural periods and mass participation rates of the structures were similar to those of shaking table tests. Abbreviations: finite element: FE; frequency response function: FRF; multiple degrees of freedom: MDOF; single degree of freedom: SDOF; soil–structure interaction: SSI.

Seismic Response Analysis of Soil-Structure Interaction on Base Isolation Structure

2013 ◽  
Vol 663 ◽  
pp. 87-91
Author(s):  
Ying Bo Pang
Keyword(s):  
Finite Element ◽  
Seismic Response ◽  
Soil Structure ◽  
Base Isolation ◽  
Soil Structure Interaction ◽  
Response Analysis ◽  
Analysis Model ◽  
Seismic Response Analysis ◽  
Structure Interaction ◽  
Calculation Results

As an effective way of passive damping, isolation technology has been widely used in all types of building structures. Currently, for its theoretical analysis, it usually follows the rigid foundation assumption and ignores soil-structure interaction, which results in calculation results distortion in conducting seismic response analysis. In this paper, three-dimensional finite element method is used to establish finite element analysis model of large chassis single-tower base isolation structure which considers and do not consider soil-structure interaction. The calculation results show that: after considering soil-structure interaction, the dynamic characteristics of the isolation structure, and seismic response are subject to varying degrees of impact.

Seismic Response Analysis of Liaocheng Guangyue Tower

2015 ◽  
Vol 744-746 ◽  
pp. 911-914
Author(s):  
Zhao Bo Meng ◽  
Guan Dong Qiao ◽  
Jie Jin
Keyword(s):  
Seismic Response ◽  
Soil Structure ◽  
Natural Frequencies ◽  
Timber Structure ◽  
Soil Structure Interaction ◽  
Response Analysis ◽  
Actual Situation ◽  
Seismic Response Analysis ◽  
Structure Interaction ◽  
Rare Earthquake

This paper establishes three models using ANSYS, which were timber structure of Guangyue Tower, timber structure-tower base and timber structure-tower base-foundation. The first 3 natural frequencies of timber structure respectively were 0.8524Hz、1.1273 Hz and 1.7426 Hz through modal analysis, which were compared with calculations from code. Lanzhou Wave was chosen to analyze the seismic response of Guangyue Tower, and the amplitudes were adjusted to 55gal and 310gal respectively according to the frequent earthquake and rare earthquake, which were inputted to the above models. As can be seen from the calculations, the maximum displacements of the three models were in the top nodes, and tower base had a greater impact on vibration of timber structure, which could not be ignored in seismic response analysis; considering soil-structure interaction in seismic response analysis could better reflect the actual situation of Guangyue Tower.

Research of Longitudinal Seismic Response of Self-Anchored Cable-Stayed Suspension Bridge under Pile-Soil-Structure Interaction

2011 ◽  
Vol 255-260 ◽  
pp. 1167-1170
Author(s):  
Feng Miao ◽  
Wang Bo ◽  
Guan Ping
Keyword(s):  
Seismic Response ◽  
Soil Structure ◽  
Suspension Bridge ◽  
Soil Structure Interaction ◽  
Response Analysis ◽  
Fe Model ◽  
Longitudinal Displacement ◽  
Finite Element Program ◽  
Structure Interaction ◽  
Element Program

Based on scheme of Dalian gulf cross-sea bridge, in this paper, a 3-dimensional FE model for Self-anchored cable-stayed suspension bridge is established with finite element program and pile-soil-structure interaction is simulated by use of the equivalent embed fixation model. Based on the FE model, model analysis is carried out and the effects of pile-soil-structure interaction on dynamic behavior of long-span self-anchored cable-stayed suspension bridge are specially studied. The seismic response analysis result considering that pile-soil-structure interaction was compared with that of without considering such interaction. The analysis result show that interaction extend the nature period of structure, has the greatest impact to the first vibration mode; meanwhile, enlarged longitudinal displacement and moment of stiffening beam in middle of main span, longitudinal displacement on top of tower and axial force at bottom, but reduced the moment of tower at bottom. The research results provide some theoretical foundation to composite structure system.

Seismic response of sands in centrifuge tests

2008 ◽  
Vol 45 (4) ◽  
pp. 470-483 ◽  
Author(s):  
Mohammad H.T. Rayhani ◽  
M. Hesham El Naggar
Keyword(s):  
Shear Modulus ◽  
Seismic Response ◽  
Soil Structure ◽  
Site Response ◽  
Damping Ratio ◽  
Soil Structure Interaction ◽  
Response Analysis ◽  
Structure Interaction ◽  
Centrifuge Tests ◽  
Seismic Site Response

Seismic site response of sandy soils and seismic soil–structure interaction are investigated using an electrohydraulic earthquake simulator mounted on a centrifuge container at an 80g field. The results of testing uniform and layered loose to medium-dense sand models subjected to 13 simulated earthquakes on the centrifuge are presented. The variation of shear modulus and damping ratio with shear strain amplitude and confining pressure was evaluated and their effects on site response were assessed. The evaluated shear modulus and damping ratio agreed reasonably with laboratory tests and empirical relationships. Site response analysis using the measured shear wave velocity and estimated modulus reduction and damping ratio as input parameters produced good agreement with the measured site response. The effect of soil–structure interaction for structures situated on dry sand is also investigated. These tests have revealed many important insights with regard to the characteristics of seismic site response and seismic soil–structure behaviour. The tests showed that the seismic response of soil deposits, input motions, and overall behaviour of the structure are affected by soil stratification. The results showed that the seismic kinematic soil–structure interaction is not very significant for structures situated on loose sand.

Large-Scale Seismic Response Analysis of a Super-High-Rise-Building Fully Considering the Soil–Structure Interaction Using a High-Fidelity 3D Solid Element Model

2016 ◽  
Vol 10 (05) ◽  
pp. 1640014 ◽  
Author(s):  
Tomoshi Miyamura ◽  
Seizo Tanaka ◽  
Muneo Hori
Keyword(s):  
Wave Propagation ◽  
Soil Structure ◽  
Large Scale ◽  
Soil Structure Interaction ◽  
Response Analysis ◽  
High Fidelity ◽  
Seismic Response Analysis ◽  
Structure Interaction ◽  
High Rise ◽  
Propagation Analysis

In the present study, a large-scale seismic response analysis of a super-high-rise steel frame considering the soil–structure interaction is conducted. A high-fidelity mesh of a 31-story super-high-rise steel frame and the ground underneath it, which is made completely of hexahedral elements, is generated. The boundary conditions that are consistent with the solution of the one-dimensional (1D) wave propagation analysis are imposed on the side and bottom surfaces of the ground. The waves are assumed to propagate in the vertical direction. The 1D wave propagation analysis is conducted under the excitation of the JR Takatori record of the 1995 Hyogoken-Nanbu earthquake. The parallel large-scale analysis is performed using the K computer, which is one of the fastest supercomputers in the world. The results of the models with and without the ground are compared, which reveals that the results obtained by these two models are very similar because the ground is assumed be sufficiently hard in the present study.

Sign in / Sign up

Export Citation Format

Share Document