scholarly journals Selection of a Suitable Wall Pressure Spectrum Model for Estimating Flow-Induced Noise in Sonar Applications

1995 ◽  
Vol 2 (5) ◽  
pp. 403-412 ◽  
Author(s):  
V. Bhujanga Rao
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
High Speed ◽  
Acoustic Radiation ◽  
Pressure Fluctuations ◽  
Theoretical Data ◽  
Wall Pressure ◽  
Wave Number ◽  
Wall Structure ◽  
Structural Noise

Flow-induced structural noise of a sonar dome in which the sonar transducer is housed, constitutes a major source of self-noise above a certain speed of the vessel. Excitation of the sonar dome structure by random pressure fluctuations in turbulent boundary layer flow leads to acoustic radiation into the interior of the dome. This acoustic radiation is termed flow-induced structural noise. Such noise contributes significantly to sonar self-noise of submerged vessels cruising at high speed and plays an important role in surface ships, torpedos, and towed sonars as well. Various turbulent boundary layer wall pressure models published were analyzed and the most suitable analytical model for the sonar dome application selected while taking into account high frequency, fluid loading, low wave number contribution, and pressure gradient effects. These investigations included type of coupling that exists between turbulent boundary layer pressure fluctuations and dome wall structure of a typical sonar dome. Comparison of theoretical data with measured data onboard a ship are also reported.

Acoustic Radiation From Separated Boundary-Layer Flow Over a Rearward-Facing Step on a Flat Panel

2003 ◽  
Author(s):  
Walter A. Kargus ◽  
Gerald C. Lauchle
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Acoustic Radiation ◽  
Fluid Dynamic ◽  
Pressure Fluctuations ◽  
Wall Pressure ◽  
Wall Jet ◽  
Measured Velocity ◽  
Wall Pressure Fluctuations ◽  
Layer Flow

The acoustic radiation from a turbulent boundary layer that occurs downstream of a rearward facing step discontinuity and reattaches to a flat plat is considred experimentally. The step is exposed ot a zero incidence, uniform subsonic flow. a quiet wall jet facility situated in an anechoic chamber is used for the studies. The “point” wall pressure spectra are measured by small, “pinhole” microphones located at various locations under the layer, including a point directly in the 90° corner of the step. The wall pressure fluctuations measured at the various locations are correlated with the signal detected by a far-field microphone. The measured cross-spectral densities are thus used to identify the relative contributions of the various flow regimes to the direct radiation. It is shown that the separation of the flow over the corner of the step is a dominant acoustic source, which is supported not only by the measured cross spectra, but also by the favorable comparison of the measured velocity power law to the theoretical value. Measurements made where the flow reattaches and at the turbulent boundary layer are less conclusive. This is because the pinhole tube attached to the microphone produced a sound due to a fluid-dynamic oscillation, which contaminated the measurement of the aeroacoustic sources.

Structural Excitation by a Turbulent Boundary Layer: An Overview

1988 ◽  
Vol 110 (2) ◽  
pp. 220-225 ◽  
Author(s):  
P. Leehey
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Power Flow ◽  
Acoustic Radiation ◽  
Practical Interest ◽  
Wall Pressure ◽  
Structural Vibration ◽  
Wave Number ◽  
Dense Fluid ◽  
Structural Excitation

Thirty years of theoretical and experimental research have yet to resolve a number of questions regarding the vibratory response of, and acoustic radiation from, a structure excited by a turbulent boundary layer (TBL). The most important questions are: (a) Can the TBL be characterized as a Thevenin source—particularly when vibratory power flow into the structure is maximized at hydrodynamic coincidence? Alternatively, at what level does structural vibration fundamentally change the character of the TBL? (b) Is the low wave number portion of the wall pressure spectrum of dominant importance in structural excitation away from hydrodynamic coincidence? Or do structural discontinuities cause the convective ridge of wall pressure to be of greater practical interest? (c) Can one quantify the radiation from a turbulent boundary layer about a rigid finite body? Is it dipole or quadrupole? What is the role of fluctuating wall shear stress? Current research on dense fluid loading and on modeling the behavior of the TBL is yielding new, and sometimes surprising, answers to some of these questions. Free resonant structural vibration in the dense fluid limit and the use of a bounded, non-causal, Green function representing the TBL are two of the surprises discussed.

Predicting Turbulent Boundary Layer Wall Pressure Fluctuations in Adverse Pressure Gradients

2005 ◽  
Author(s):  
Frank J. Aldrich
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Pressure Fluctuations ◽  
Adverse Pressure Gradient ◽  
Wall Pressure ◽  
Prediction Tool ◽  
Pressure Gradients ◽  
Wall Pressure Fluctuations ◽  
The Difference

A physics-based approach is employed and a new prediction tool is developed to predict the wavevector-frequency spectrum of the turbulent boundary layer wall pressure fluctuations for subsonic airfoils under the influence of adverse pressure gradients. The prediction tool uses an explicit relationship developed by D. M. Chase, which is based on a fit to zero pressure gradient data. The tool takes into account the boundary layer edge velocity distribution and geometry of the airfoil, including the blade chord and thickness. Comparison to experimental adverse pressure gradient data shows a need for an update to the modeling constants of the Chase model. To optimize the correlation between the predicted turbulent boundary layer wall pressure spectrum and the experimental data, an optimization code (iSIGHT) is employed. This optimization module is used to minimize the absolute value of the difference (in dB) between the predicted values and those measured across the analysis frequency range. An optimized set of modeling constants is derived that provides reasonable agreement with the measurements.

The scaling of the wall pressure fluctuations in polymer-modified turbulent boundary layer flow

2000 ◽  
Vol 108 (1) ◽  
pp. 71-75 ◽  
Author(s):  
Timothy A. Brungart ◽  
Wayne J. Holmberg ◽  
Arnold A. Fontaine ◽  
Steven Deutsch ◽  
Howard L. Petrie
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Boundary Layer Flow ◽  
Pressure Fluctuations ◽  
Wall Pressure ◽  
Wall Pressure Fluctuations ◽  
Turbulent Boundary Layer Flow ◽  
Layer Flow
Sign in / Sign up

Export Citation Format

Share Document