scholarly journals Fully Coupled FE Analyses of Buried Structures

1994 ◽  
Vol 1 (5) ◽  
pp. 451-460
Author(s):  
James T. Baylot
Keyword(s):  
Finite Element ◽  
Stress Analysis ◽  
Free Field ◽  
Scale Model ◽  
Response Analysis ◽  
Element Analysis ◽  
Buried Structures ◽  
Field Stress ◽  
Structure Response ◽  
Fully Coupled

Current procedures for determining the response of buried structures to the effects of the detonation of buried high explosives recommend decoupling the free-field stress analysis from the structure response analysis. A fully coupled (explosive–soil structure) finite element analysis procedure was developed so that the accuracies of current decoupling procedures could be evaluated. Comparisons of the results of analyses performed using this procedure with scale-model experiments indicate that this finite element procedure can be used to effectively evaluate the accuracies of the methods currently being used to decouple the free-field stress analysis from the structure response analysis.

scholarly journals Stator Non-Uniform Radial Ventilation Design Methodology for a 15 MW Turbo-Synchronous Generator Based on Single Ventilation Duct Subsystem

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2760
Author(s):  
Ruiye Li ◽  
Peng Cheng ◽  
Hai Lan ◽  
Weili Li ◽  
David Gerada ◽  
...  
Keyword(s):  
Finite Element ◽  
Temperature Distribution ◽  
Design Methodology ◽  
Large Scale ◽  
Synchronous Generator ◽  
Axial Direction ◽  
Scale Model ◽  
Element Analysis ◽  
Axial Temperature ◽  
Ventilation Duct

Within large turboalternators, the excessive local temperatures and spatially distributed temperature differences can accelerate the deterioration of electrical insulation as well as lead to deformation of components, which may cause major machine malfunctions. In order to homogenise the stator axial temperature distribution whilst reducing the maximum stator temperature, this paper presents a novel non-uniform radial ventilation ducts design methodology. To reduce the huge computational costs resulting from the large-scale model, the stator is decomposed into several single ventilation duct subsystems (SVDSs) along the axial direction, with each SVDS connected in series with the medium of the air gap flow rate. The calculation of electromagnetic and thermal performances within SVDS are completed by finite element method (FEM) and computational fluid dynamics (CFD), respectively. To improve the optimization efficiency, the radial basis function neural network (RBFNN) model is employed to approximate the finite element analysis, while the novel isometric sampling method (ISM) is designed to trade off the cost and accuracy of the process. It is found that the proposed methodology can provide optimal design schemes of SVDS with uniform axial temperature distribution, and the needed computation cost is markedly reduced. Finally, results based on a 15 MW turboalternator show that the peak temperature can be reduced by 7.3 ∘C (6.4%). The proposed methodology can be applied for the design and optimisation of electromagnetic-thermal coupling of other electrical machines with long axial dimensions.

Finite Element Analysis of Drum on the New Type Self-Driven Towing Machine for Cable

2011 ◽  
Vol 55-57 ◽  
pp. 664-669
Author(s):  
Jin Ning Nie ◽  
Hui Wang ◽  
De Feng Xie
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Analysis ◽  
Compressive Stress ◽  
Wire Rope ◽  
Ansys Software ◽  
Element Analysis ◽  
Structure Improvement ◽  
Improvement Measures ◽  
New Type

According to the situation that the dual-friction drums on the new type towing machine lack stress analysis when designed, the safety is difficult to test and verify. The pull of wire rope in various positions was derived and calculated, so both compressive stress and tangent friction force generated by the pull of wire rope were calculated. The result made by ANSYS software demonstrates the safety of the left drum which suffers from larger loads, structure improvement measures are put forward for the drum.

The Finite Element Analysis and Optimization for the Grinder Based on the Joint Surface

2013 ◽  
Vol 281 ◽  
pp. 165-169 ◽  
Author(s):  
Xiang Lei Zhang ◽  
Bin Yao ◽  
Wen Chang Zhao ◽  
Ou Yang Kun ◽  
Bo Shi Yao
Keyword(s):  
Finite Element ◽  
Natural Frequency ◽  
Element Model ◽  
Joint Surface ◽  
Weak Links ◽  
Response Analysis ◽  
Element Analysis ◽  
Static And Dynamic Analysis ◽  
Harmonic Response Analysis ◽  
Grinding Machine

Establish the finite element model for high precision grinding machine which takes joint surface into consideration and then carrys out the static and dynamic analysis of the grinder. After the static analysis, modal analysis and harmonic response analysis, the displacement deformation, stress, natural frequency and vibration mode could be found, which also helps find the weak links out. The improvement scheme which aims to increase the stiffness and precision of the whole machine has proposed to efficiently optimize the grinder. And the first natural frequency of the optimized grinder has increased by 68.19%.

Stress Analysis and Structure Optimization for the Opening Flat Cover of Pressure Vessels

2012 ◽  
Vol 538-541 ◽  
pp. 3253-3258 ◽  
Author(s):  
Jun Jian Xiao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Concentration ◽  
Stress Analysis ◽  
Structure Optimization ◽  
Pressure Vessels ◽  
Secondary Stress ◽  
Element Analysis ◽  
Primary Stress ◽  
Flat Cover

According to the results of finite element analysis (FEA), when the diameter of opening of the flat cover is no more than 0.5D (d≤0.5D), there is obvious stress concentration at the edge of opening, but only existed within the region of 2d. Increasing the thickness of flat covers could not relieve the stress concentration at the edge of opening. It is recommended that reinforcing element being installed within the region of 2d should be used. When the diameter of openings is larger than 0.5D (d>0.5D), conical or round angle transitions could be employed at connecting location, with which the edge stress decreased remarkably. However, the primary stress plus the secondary stress would be valued by 3[σ].

Strength-based design of a sunflower stalk cutter machine design using finite element analysis and experimental validation

2021 ◽  
pp. 095440622110597
Author(s):  
Gürkan İrsel
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Analysis ◽  
Strain Gage ◽  
Experimental Validation ◽  
Experimental Studies ◽  
Fatigue Analysis ◽  
Structural Stress ◽  
Element Analysis ◽  
Strength Based

In this study, the total algorithm of the strength-based design of the system for mass production has been developed. The proposed algorithm, which includes numerical, analytical, and experimental studies, was implemented through a case study on the strength-based structural design and fatigue analysis of a tractor-mounted sunflower stalk cutting machine (SSCM). The proposed algorithm consists of a systematic engineering approach, material selection and testing, design of the mass criteria suitability, structural stress analysis, computer-aided engineering (CAE), prototype production, experimental validation studies, fatigue calculation based on an FE model and experimental studies (CAE-based fatigue analysis), and an optimization process aimed at minimum weight. Approximately 85% of the system was designed using standard commercially available cross-section beams and elements using the proposed algorithm. The prototype was produced, and an HBM data acquisition system was used to collect the strain gage output. The prototype produced was successful in terms of functionality. Two- and three-dimensional mixed models were used in the structural analysis solution. The structural stress analysis and experimental results with a strain gage were 94.48% compatible in this study. It was determined using nCode DesignLife software that fatigue damage did not occur in the system using the finite element analysis (FEA) and experimental data. The SSCM design adopted a multi-objective genetic algorithm (MOGA) methodology for optimization with ANSYS. With the optimization solved from 422 iterations, a maximum stress value of 57.65 MPa was determined, and a 97.72 kg material was saved compared to the prototype. This study provides a useful methodology for experimental and advanced CAE techniques, especially for further study on complex stress, strain, and fatigue analysis of new systematic designs desired to have an optimum weight to strength ratio.

scholarly journals Simulation Analysis on Cymbal Transducer

2011 ◽  
Vol 2-3 ◽  
pp. 140-143
Author(s):  
Qing Feng Yang ◽  
Peng Wang ◽  
Yu Hong Wang ◽  
Kai Zhang
Keyword(s):  
Finite Element ◽  
Resonance Frequency ◽  
Piezoelectric Ceramic ◽  
Electromechanical Coupling ◽  
Free Field ◽  
Voltage Sensitivity ◽  
Element Analysis ◽  
Cavity Bottom ◽  
Finite Element Software ◽  
Cymbal Transducer

The resonance frequency of the cymbal transducer ranges from 2kHz to 40kHz and its effective electromechanical coupling factor is around 20%. Finite element analysis has been performed to ascertain how the transducer’s makeup affect the transducer’s performance parameters. Two-dimensional axisymmetric model of the cymbal transducer was founded by finite element software-ANSYS, the application of the element type was discussed and the FEM models were built up under the far field condition. Eight groups of cymbal transducers of resonance frequency around 3kHz with different structural dimensions were designed. It was better for choosing the cymbal transducer of the 8mm cavity coping diameter, 20.8mm cavity bottom diameter and 26.8mm piezoelectric ceramic wafer diameter than others for reducing distortion degree of the signal and improving communication turnover in the researched cymbal transducers. It was appropriate for choosing the cymbal transducer of the 8mm cavity coping diameter, 22.4mm cavity bottom diameter and 26.4mm piezoelectric ceramic wafer diameter in order to improve the free-field voltage sensitivity and transmission efficient.

Temperature and Stress Analysis of Corn Kernel— Finite Element Analysis

1979 ◽  
Vol 22 (4) ◽  
pp. 0955-0960 ◽  
Author(s):  
Robert J. Gustafson ◽  
David R. Thompson ◽  
Shahab Sokhansanj
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Analysis ◽  
Corn Kernel ◽  
Element Analysis

Electrochemical Corrosion Finite Element Analysis and Burst Pressure Prediction of Externally Corroded Underground Gas Transmission Pipelines

2017 ◽  
Vol 140 (1) ◽  
Author(s):  
Ibrahim M. Gadala ◽  
Magd Abdel Wahab ◽  
Akram Alfantazi
Keyword(s):  
Finite Element ◽  
Stress Analysis ◽  
Reaction Kinetics ◽  
Moving Boundary ◽  
Electrochemical Corrosion ◽  
Burst Pressure ◽  
Element Analysis ◽  
Corrosion Defect ◽  
Nonlinear Stress ◽  
Pipeline Wall

An integrative numerical simulation approach for pipeline integrity analysis is presented in this work, combining a corrosion model, which is the main focus of this paper, with a complementary structural nonlinear stress analysis, using the finite element method (FEM). Potential distributions in the trapped water existing beneath pipeline coating disbondments are modeled in conjunction with reaction kinetics on the corroding exposed steel surface using a moving boundary mesh. Temperature dependencies (25 °C and 50 °C) of reaction kinetics do not greatly affect final corrosion defect geometries after 3-yr simulation periods. Conversely, cathodic protection (CP) levels and pH dependencies within the near-neutral pH range (6.7–8.5) strongly govern depth profiles caused by corrosion, reaching a maximum of ∼3 mm into the pipeline wall. A 0.25 V amplification of CP potential combined with a 0.5 mm widening in disbondment opening size reduces defect penetration by almost 30%. Resulting corrosion defect geometries are used for stress examinations and burst pressure evaluations. Furthermore, nonlinear elastic–plastic stress analysis is carried out using shell elements in order to predict the burst pressure of corroded pipes. Corrosion is modeled by reducing the stiffness of a damaged element that has the dimensions of the defect. The predicted burst pressures are in good agreement with those obtained using an experimental-based formula.

Sign in / Sign up

Export Citation Format

Share Document