scholarly journals Theory, Analysis and Implementation of an On-Line BIST Technique

VLSI Design ◽  
1993 ◽  
Vol 1 (1) ◽  
pp. 9-22 ◽  
Author(s):  
Rajiv Sharma ◽  
Kewal K. Saluja
Keyword(s):  
Cmos Technology ◽  
Normal Operation ◽  
Theory Analysis ◽  
Chip Area ◽  
Intermittent Faults ◽  
Simulation Techniques ◽  
System Maintenance ◽  
On Line ◽  
Line Test ◽  
The Impact

A Built-ln Concurrent Self-Test (BICST) technique for testing combinational logic circuits concurrently with their normal operation is proposed. Concept of sharing the test hardware between identical circuits to reduce the overall area overhead is introduced. The method was implemented in the design of an ALU with on-line test capability in CMOS technology. The additional hardware used for a 12-bit ALU was 19% of the total chip area and it did not impose any timing overhead on the operation of the ALU. The overhead decreases with an increase in the size of the ALU.Following the description of the BICST technique, measures for evaluating the performance of the BICST technique are defined. Methods for the computation of the performance measures using analytical and simulation techniques are discussed and results of these methods are reported. Methods for detecting intermittent faults and for computing the transient fault coverage using BICST are also described. The impact of BICST on the system diagnostics and system maintenance is discussed.

scholarly journals A low-noise current preamplifier in 120 nm CMOS technology

2008 ◽  
Vol 6 ◽  
pp. 213-217 ◽  
Author(s):  
H. Uhrmann ◽  
W. Gaberl ◽  
H. Zimmermann
Keyword(s):  
High Speed ◽  
Analog Circuit ◽  
Low Voltage ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Low Noise ◽  
Special Focus ◽  
Current Mirror ◽  
Chip Area ◽  
The Impact

Abstract. In this paper we examine the impact of deep sub-micron CMOS technology on analog circuit design with a special focus on the noise performance and the ability to design low-noise preamplifiers. To point out, why CMOS technology can grow to a key technology in low-noise and high-speed applications, various amplifier stages, applied in literature, are compared. One, that fits as a current preamplifier for low-noise applications, is the current mirror. Starting from the basic current mirror, an enhanced current preamplifier is developed, that offers low-noise and high-speed operation. The suggested chip is realized in 0.12 μm CMOS technology and needs a chip area of 100 μm×280 μm. It consumes about 15 mW at a supply voltage of 1.5 V. The presented current preamplifier has a bandwidth of 750 MHz and a gain of 36 dB. The fields of application for current preamplifiers are, for instance, charge amplifiers, amplifiers for low-voltage differential signaling (LVDS) based point-to-point data links or preamplifiers for photodetectors.

The Concept of Model-View-Controler (MVC) as Solution Software Development

CCIT Journal ◽  
2010 ◽  
Vol 3 (3) ◽  
pp. 377-402
Author(s):  
Ermatita Ermatita ◽  
Huda Ubaya ◽  
Dwirosa Indah
Keyword(s):  
Software Development ◽  
Model View Controller ◽  
On Line ◽  
Line Test ◽  
Model View

Pengembangan perangkat lunak adalah tugas kompleks dan membutuhkan adaptasi untuk mengakomodasi kebutuhan pengguna. Untuk membuat konsep dan perubahan perangkat lunak, dalam pemeliharaan, sekarang telah dikembangkan lebih mudah dalam pengembangan perangkat lunak, pola model-view-controller, yang merupakan arsitektur yang dapat membantu memfasilitasi dalam pengembangan dan pemeliharaan perangkat luna. Hal ini, karena dalam arsitektur model tiga-lapis, yaitu: tampilan dan pengontrolan dalam pembangunan dilakukan secara independen, sehingga dapat memberikan dahan dalam pengembangan dan pemeliharaan. Selain itu, arsitektur ini juga dapat melihat hal-hal yang sederhana dan menarik bagi pengguna. Software sistem on-line test adalah perangkat lunak yang memerlukan interaksi dengan pengguna, dan pemeliharaan perangkat adaptif. Karena sistem ujian on-line memerlukan pengembangan perangkat lunak untuk mengakomodasi kebutuhan ini berkembang dengan cepat. Makalah ini untuk menganalisis Model-View-Controller dan mencoba pembangunan, untuk menerapkannya dalam pengembangan perangkat lunak sistem pengujian on-line. 

The impact of the COVID-19 pandemic on the psychosocial condition of students in Poland and Ukraine

2020 ◽  
Author(s):  
Piotr Długosz ◽  
Yana
Keyword(s):  
Distance Learning ◽  
Negative Impact ◽  
Well Being ◽  
Survey Method ◽  
Psychosocial Condition ◽  
On Line ◽  
Line Survey ◽  
The Impact ◽  
Emotional Condition ◽  
Double Measurement

The article presents the results of research on psychosocial condition among Polish and Ukrainian students during the quarantine. The aim of the research was to verify the impact of the pandemic and its accompanying phenomena on the well-being of youth. In order to achieve this goal, the CAWI on-line survey method with double measurement was used. The first measurement carried out at the beginning of the quarantine resulted in 3659 filled out surveys in Poland and 739 in Ukraine. The second measurement conducted at the end of distance learning brought 1978 filled out surveys in Poland and 411 in Ukraine. The results of research indicate that the quarantine had a negative impact on the psychosocial condition of youth. The deterioration of emotional condition and the increase in mental disorders has been observed. Due to the pandemic and distance learning, the mental health of youth deteriorated significantly. Polish youth were negatively influenced by the pandemic to a greater extent than young Ukrainians.

Designing a CRM Framework for online & offline sports footwear retailers

2015 ◽  
Vol 3 (1) ◽  
Author(s):  
Rodrigo Cueva ◽  
Guillem Rufian ◽  
Maria Gabriela Valdes
Keyword(s):  
Environmental Changes ◽  
Customer Relationship ◽  
Business Strategies ◽  
Economic Sectors ◽  
Running Shoes ◽  
Brick And Mortar ◽  
Key Factor ◽  
On Line ◽  
The Impact

The use of Customer Relationship Managers to foster customers loyalty has become one of the most common business strategies in the past years.  However, CRM solutions do not fill the abundance of happily ever-after relationships that business needs, and each client’s perception is different in the buying process.  Therefore, the experience must be precise, in order to extend the loyalty period of a customer as much as possible. One of the economic sectors in which CRM’s have improved this experience is retailing, where the personalized attention to the customer is a key factor.  However, brick and mortar experiences are not enough to be aware in how environmental changes could affect the industry trends in the long term.  A base unified theoretical framework must be taken into consideration, in order to develop an adaptable model for constructing or implementing CRMs into companies. Thanks to this approximation, the information is complemented, and the outcome will increment the quality in any Marketing/Sales initiative. The goal of this article is to explore the different factors grouped by three main domains within the impact of service quality, from a consumer’s perspective, in both on-line and off-line retailing sector.  Secondly, we plan to go a step further and extract base guidelines about previous analysis for designing CRM’s solutions focused on the loyalty of the customers for a specific retailing sector and its product: Sports Running Shoes.

60 GHz-Band Low-Noise Amplifier

2017 ◽  
Vol 26 (05) ◽  
pp. 1750075 ◽  
Author(s):  
Najam Muhammad Amin ◽  
Lianfeng Shen ◽  
Zhi-Gong Wang ◽  
Muhammad Ovais Akhter ◽  
Muhammad Tariq Afridi
Keyword(s):  
Transmission Line ◽  
Quality Factor ◽  
Noise Figure ◽  
Cmos Technology ◽  
Low Noise ◽  
Constant Current ◽  
60 Ghz ◽  
Frequency Range ◽  
Constant Current Density ◽  
Chip Area

This paper presents the design of a 60[Formula: see text]GHz-band LNA intended for the 63.72–65.88[Formula: see text]GHz frequency range (channel-4 of the 60[Formula: see text]GHz band). The LNA is designed in a 65-nm CMOS technology and the design methodology is based on a constant-current-density biasing scheme. Prior to designing the LNA, a detailed investigation into the transistor and passives performances at millimeter-wave (MMW) frequencies is carried out. It is shown that biasing the transistors for an optimum noise figure performance does not degrade their power gain significantly. Furthermore, three potential inductive transmission line candidates, based on coplanar waveguide (CPW) and microstrip line (MSL) structures, have been considered to realize the MMW interconnects. Electromagnetic (EM) simulations have been performed to design and compare the performances of these inductive lines. It is shown that the inductive quality factor of a CPW-based inductive transmission line ([Formula: see text] is more than 3.4 times higher than its MSL counterpart @ 65[Formula: see text]GHz. A CPW structure, with an optimized ground-equalizing metal strip density to achieve the highest inductive quality factor, is therefore a preferred choice for the design of MMW interconnects, compared to an MSL. The LNA achieves a measured forward gain of [Formula: see text][Formula: see text]dB with good input and output impedance matching of better than [Formula: see text][Formula: see text]dB in the desired frequency range. Covering a chip area of 1256[Formula: see text][Formula: see text]m[Formula: see text]m including the pads, the LNA dissipates a power of only 16.2[Formula: see text]mW.

Research on On-Line Anti-Icing Technology for Carenary along Electrified Railway

2013 ◽  
Vol 676 ◽  
pp. 321-324
Author(s):  
Lei Guo ◽  
Qun Zhan Li
Keyword(s):  
Simulation Model ◽  
Heat Balance ◽  
Normal Operation ◽  
Balance Equations ◽  
Model Based ◽  
Static Var Generator ◽  
On Line ◽  
Electrified Railway ◽  
The Heat Balance

Accidents of icing on catenary have great impacts on normal operation of trains. An on-line anti-icing technology used static var generator (SVG) for catenary was proposed, which can prevent icing formation without interrupting trains normal operation. The heat balance equations for catenary were solved, whose results were compared with data provided by TB/T 3111 and testing show the equation was correct. The simulation model based on Matlab was bulit , whose results and analysis show the correctness of the method.

scholarly journals Environmental Sensitivity and Awareness as Differentiating Factors in the Purchase Decision-Making Process in the Smartphone Industry—Case of Polish Consumers

2021 ◽  
Vol 13 (1) ◽  
pp. 348
Author(s):  
Lukasz Skowron ◽  
Monika Sak-Skowron
Keyword(s):  
Expectation Maximization ◽  
Cross Validation ◽  
Expectation Maximization Algorithm ◽  
Decision Making Process ◽  
Environmental Sensitivity ◽  
Significance Level ◽  
On Line ◽  
Purchase Process ◽  
The Impact ◽  
Fold Cross Validation

The first of the research objectives discussed in this article was to analyze the differences related to the valuation of particular factors influencing the purchase process in the smartphone industry, expressed by respondents with different sensitivity and environmental awareness, as well as the assessment of their knowledge about the impact of smartphones on the natural environment. The second objective of the research was to determine whether the level of environmental sensitivity, awareness and knowledge about the impact of smartphones on the environment has a statistically significant influence on the respondents’ choice of smartphone brand. The survey was conducted using an on-line questionnaire, distributed by a specialized research agency on a representative sample of over 1000 Polish residents. In order to identify the various customers clusters, the expectation-maximization algorithm and the v-fold cross-validation were used. Additionally, in order to analyze the significance level of differences between clusters the nonparametric Mann-Whitney U-test was carried out. The results show unequivocally that people with a different approach to ecological issues demonstrate statistically significant differences in their purchasing behaviors in the smartphone industry. Furthermore, it was noticed that in the case of comparing some smartphones brands, there is a statistically confirmed difference in the environmental sensitivity and awareness of the customers who use them. Moreover, the research has shown that in Polish customers’ consciousness smartphones are mistakenly considered to be relatively safe and environmentally friendly products.

scholarly journals Novel Features and PRPD Image Denoising Method for Improved Single-Source Partial Discharges Classification in On-Line Hydro-Generators

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3267
Author(s):  
Ramon C. F. Araújo ◽  
Rodrigo M. S. de Oliveira ◽  
Fernando S. Brasil ◽  
Fabrício J. B. Barros
Keyword(s):  
Image Denoising ◽  
Recognition Performance ◽  
Partial Discharge ◽  
Classification Performance ◽  
Partial Discharges ◽  
Denoising Method ◽  
Internal Parameters ◽  
On Line ◽  
Automatic Removal ◽  
The Impact

In this paper, a novel image denoising algorithm and novel input features are proposed. The algorithm is applied to phase-resolved partial discharge (PRPD) diagrams with a single dominant partial discharge (PD) source, preparing them for automatic artificial-intelligence-based classification. It was designed to mitigate several sources of distortions often observed in PRPDs obtained from fully operational hydroelectric generators. The capabilities of the denoising algorithm are the automatic removal of sparse noise and the suppression of non-dominant discharges, including those due to crosstalk. The input features are functions of PD distributions along amplitude and phase, which are calculated in a novel way to mitigate random effects inherent to PD measurements. The impact of the proposed contributions was statistically evaluated and compared to classification performance obtained using formerly published approaches. Higher recognition rates and reduced variances were obtained using the proposed methods, statistically outperforming autonomous classification techniques seen in earlier works. The values of the algorithm’s internal parameters are also validated by comparing the recognition performance obtained with different parameter combinations. All typical PD sources described in hydro-generators PD standards are considered and can be automatically detected.

Sign in / Sign up

Export Citation Format

Share Document