X-ray powder diffraction study of Sn0.59Ti0.41Te3O8

2008 ◽  
Vol 23 (3) ◽  
pp. 228-231 ◽  
Author(s):  
W. Ben Aribia ◽  
M. Loukil ◽  
A. Kabadou ◽  
A. Ben Salah
Keyword(s):  
Powder Diffraction ◽  
Room Temperature ◽  
Structural Information ◽  
Lone Pair ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
The Stability ◽  
Ir Spectroscopic

The crystal structure of titanium-tin tellurium oxide Sn0.59Ti0.41Te3O8 has been determined using X-ray powder diffraction techniques. At room temperature, the title compound crystallizes in cubic space group Ia-3, with lattice parameter a=11.05515(6) Å. Rietveld refinement of the structure led to final confidence factors Rp=0.0395 and Rwp=0.0577. The structure of Sn0.59Ti0.41Te3O8 consists of isolated Ti/SnO6-octahedra slightly deformed in the a direction. The TeO4E [E=lone pair of Te(IV) atoms] groups are located between the octahedra ensuring the stability of the structure by Ti/Sn-O-Te bonding contacts. Only one peak in thermal behavior was detected for this compound at 488 K by differential scanning calorimetry experiment. An IR spectroscopic study is employed as a means to obtain preliminary structural information and shows the presence of the Ti/SnO6 and TeO4E groups. This result is later confirmed by X-ray diffraction studies.

X-ray powder diffraction study of cesium ammonium hexachlorotellurate [Cs0.86(NH4)0.14]2TeCl6

2006 ◽  
Vol 21 (3) ◽  
pp. 225-228 ◽  
Author(s):  
R. Karray ◽  
A. Kabadou ◽  
A. Ben Salah ◽  
A. van der Lee
Keyword(s):  
Crystal Structure ◽  
Powder Diffraction ◽  
Related Compound ◽  
Room Temperature ◽  
Diffraction Method ◽  
Large Family ◽  
Lattice Parameter ◽  
X Ray ◽  
Ammonium Group ◽  
Ir Spectroscopic

The crystal structure of cesium ammonium hexachlorotellurate [Cs0.86(NH4)0.14]2TeCl6, has been determined using X-ray powder diffraction techniques. At room temperature, the title compound crystallizes in the cubic space group Fm3m, with a lattice parameter a=10.470(17) Å. The Rietveld refinement of the structure led to final confidence factors Rp=0.0338 and Rwp=0.0487. The structure of [Cs0.86(NH4)0.14]2TeCl6 belongs to the large family of K2PtCl6-related structures. The H atoms of the ammonium group are orientated with its apex toward Te atoms as seen in the related compound (NH4)2SiF6. An IR spectroscopic study was performed to confirm the results of the diffraction method, notably concerning the presence of the ammonium group.

Crystal structure of Ca1−xSrxZr4(PO4)6 (0≤x≤1)

2004 ◽  
Vol 19 (2) ◽  
pp. 153-156 ◽  
Author(s):  
Werner Fischer ◽  
Lorenz Singheiser ◽  
Debabrata Basu ◽  
Amit Dasgupta
Keyword(s):  
Crystal Structure ◽  
Solid Solution ◽  
High Temperature ◽  
Structural Transformation ◽  
Powder Diffraction ◽  
Room Temperature ◽  
Lattice Parameter ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
X Ray

The crystal structure of several compounds of Ca1−xSrxZr4(PO4)6 ceramics has been investigated by X-ray powder diffraction at room temperature. All compounds form a solid solution with a unique unit cell. While the lattice parameter a of the hexagonal unit cell decreases of about 0.9% with increasing Sr content only slightly, it considerably elongates in c direction (2.8%). No structural transformation has been observed by high-temperature X-ray diffraction up to 1000 °C.

scholarly journals Facile Organometallic Synthesis of Fe-Based Nanomaterials by Hot Injection Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1141
Author(s):  
Georgia Basina ◽  
Hafsa Khurshid ◽  
Nikolaos Tzitzios ◽  
George Hadjipanayis ◽  
Vasileios Tzitzios
Keyword(s):  
Room Temperature ◽  
Colloidal Particles ◽  
Iron Pentacarbonyl ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
Organometallic Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Hot Injection ◽  
The Stability

Fe-based colloids with a core/shell structure consisting of metallic iron and iron oxide were synthesized by a facile hot injection reaction of iron pentacarbonyl in a multi-surfactant mixture. The size of the colloidal particles was affected by the reaction temperature and the results demonstrated that their stability against complete oxidation related to their size. The crystal structure and the morphology were identified by powder X-ray diffraction and transmission electron microscopy, while the magnetic properties were studied at room temperature with a vibrating sample magnetometer. The injection temperature plays a very crucial role and higher temperatures enhance the stability and the resistance against oxidation. For the case of injection at 315 °C, the nanoparticles had around a 10 nm mean diameter and revealed 132 emu/g. Remarkably, a stable dispersion was created due to the colloids’ surface functionalization in a nonpolar solvent.

scholarly journals MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

2000 ◽  
Vol 5 (S1) ◽  
pp. 412-424
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

We report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

Microstructure Evolution of a Fine Grain Al-50wt%Si Alloy Fabricated by High Energy Milling

2011 ◽  
Vol 479 ◽  
pp. 54-61 ◽  
Author(s):  
Fei Wang ◽  
Ya Ping Wang
Keyword(s):  
Grain Growth ◽  
Microstructure Evolution ◽  
Room Temperature ◽  
Milling Time ◽  
High Energy ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Laser Method ◽  
X Ray ◽  
Fine Grain

Microstructure evolution of high energy milled Al-50wt%Si alloy during heat treatment at different temperature was studied. Scanning electron microscope (SEM) and X-ray diffraction (XRD) results show that the size of the alloy powders decreased with increasing milling time. The observable coarsening of Si particles was not seen below 730°C in the high energy milled alloy, whereas, for the alloy prepared by mixed Al and Si powders, the grain growth occurred at 660°C. The activation energy for the grain growth of Si particles in the high energy milled alloy was determined as about 244 kJ/mol by the differential scanning calorimetry (DSC) data analysis. The size of Si particles in the hot pressed Al-50wt%Si alloy prepared by high energy milled powders was 5-30 m at 700°C, which was significantly reduced compared to that of the original Si powders. Thermal diffusivity of the hot pressed Al-50wt%Si alloy was 55 mm2/s at room temperature which was obtained by laser method.

scholarly journals Viability of the microencapsulation of a casein hydrolysate in lipid microparticles of cupuacu butter and stearic acid

2013 ◽  
Vol 2 (1) ◽  
Author(s):  
Samantha Cristina Pinho ◽  
Janaina Costa Da Silva
Keyword(s):  
Stearic Acid ◽  
Room Temperature ◽  
Casein Hydrolysate ◽  
Polysorbate 80 ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Initial Amount ◽  
X Ray ◽  
Lipid Mixtures ◽  
Lipid Microparticles

Solid lipid microparticles produced with a mixture of cupuacu butter and stearic acid were used to microencapsulate a commercial casein hydrolysate (Hyprol 8052). The composition of the lipid matrix used for the production of the lipid microparticles was chosen according to data on the wide angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) of bulk lipid mixtures, which indicated that the presence of 10 % cupuacu butter was sufficient to significantly change the crystalline arrangement of pure stearic acid. Preliminary tests indicated that a minimum proportion of 4 % of surfactant (polysorbate 80) was necessary to produce empty spherical lipid particles with average diameters below 10 mm. The lipid microparticles were produced using 20 % cupuacu butter and 80 % stearic acid and then stabilized with 4 % of polysorbate 80, exhibiting an encapsulation efficiency of approximately 74 % of the casein hydrolysate. The melting temperature of the casein hydrolysate-loaded lipid microparticles was detected at 65.2 °C, demonstrating that the particles were solid at room temperature as expected and indicating that the incorporation of peptides had not affected their thermal behavior. After 25 days of storage, however, there was a release of approximately 30 % of the initial amount of encapsulated casein hydrolysate. This release was not thought to have been caused by the liberation of encapsulated casein hydrolysate. Instead, it was attributed to the possible desorption of the adsorbed peptides present on the surface of the lipid microparticles.

Influence of Gd Addition on the Structure and Capability of Ni-Mn-In Metamagnetic Shape Memory Alloys

2012 ◽  
Vol 535-537 ◽  
pp. 950-953
Author(s):  
Li Na Bai ◽  
Gui Xing Zheng ◽  
Zhi Jian Duan ◽  
Jian Jun Zhang
Keyword(s):  
Differential Scanning Calorimetry ◽  
Magnetic Properties ◽  
Magnetic Property ◽  
Transition Temperature ◽  
Martensitic Transformation ◽  
Room Temperature ◽  
Vibrating Sample Magnetometry ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray

The influences of Gd concentration on martensitic transformation and magnetic properties of NiMnIn alloys were investigated by differential scanning calorimetry (DSC) , vibrating sample magnetometry (VSM), X-ray diffraction (XRD) and etc. It is Observed through the experiment: the addition of Gd enhances martensite transition temperature;X-ray diffraction analysis of experimental alloys is revealed that to the mixture is martensite and austenite at room temperature; content of Gd is not proportional to the improvement of magnetic property.

MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

1999 ◽  
Vol 595 ◽  
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

AbstractWe report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

Study of thermal properties of Ga0.5In1.5Se3 by differential scanning calorimetry

2021 ◽  
pp. 2150407
Author(s):  
S. I. Ibrahimova
Keyword(s):  
Crystal Structure ◽  
Differential Scanning Calorimetry ◽  
Thermal Properties ◽  
Thermal Effects ◽  
Room Temperature ◽  
Structural Studies ◽  
X Ray Diffraction ◽  
Hexagonal Symmetry ◽  
Scanning Calorimetry ◽  
X Ray

The crystal structure and thermal properties of the [Formula: see text] compound have been investigated. Structural studies were performed by X-ray diffraction at room temperature. The crystal structure of this compound was found to correspond to the hexagonal symmetry of the space group P61. Thermal properties were studied using a differential scanning calorimetry (DSC). It was found in the temperature range [Formula: see text] that thermal effects occur at temperatures [Formula: see text] and [Formula: see text]. The thermodynamic parameters of these effects are calculated.

The structures and phase transitions in 4-aminopyridinium tetraaquabis(sulfato)iron(III), (C5H7N2)[FeIII(H2O)4(SO4)2]

2019 ◽  
Vol 75 (6) ◽  
pp. 1144-1151
Author(s):  
Tamara J. Bednarchuk ◽  
Wolfgang Hornfeck ◽  
Vasyl Kinzhybalo ◽  
Zhengyang Zhou ◽  
Michal Dušek ◽  
...  
Keyword(s):  
Phase Transitions ◽  
Single Crystal ◽  
Room Temperature ◽  
Variable Temperature ◽  
Temperature Phase ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Hybrid Compound ◽  
Space Group ◽  
X Ray

The organic–inorganic hybrid compound 4-aminopyridinium tetraaquabis(sulfato)iron(III), (C5H7N2)[FeIII(H2O)4(SO4)2] (4apFeS), was obtained by slow evaporation of the solvent at room temperature and characterized by single-crystal X-ray diffraction in the temperature range from 290 to 80 K. Differential scanning calorimetry revealed that the title compound undergoes a sequence of three reversible phase transitions, which has been verified by variable-temperature X-ray diffraction analysis during cooling–heating cycles over the temperature ranges 290–100–290 K. In the room-temperature phase (I), space group C2/c, oxygen atoms from the closest Fe-atom environment (octahedral) were disordered over two equivalent positions around a twofold axis. Two intermediate phases (II), (III) were solved and refined as incommensurately modulated structures, employing the superspace formalism applied to single-crystal X-ray diffraction data. Both structures can be described in the (3+1)-dimensional monoclinic X2/c(α,0,γ)0s superspace group (where X is ½, ½, 0, ½) with modulation wavevectors q = (0.2943, 0, 0.5640) and q = (0.3366, 0, 0.5544) for phases (II) and (III), respectively. The completely ordered low-temperature phase (IV) was refined with the twinning model in the triclinic P{\overline 1} space group, revealing the existence of two domains. The dynamics of the disordered anionic substructure in the 4apFeS crystal seems to play an essential role in the phase transition mechanisms. The discrete organic moieties were found to be fully ordered even at room temperature.

Sign in / Sign up

Export Citation Format

Share Document