D108 Multi-Mode X-ray Study of Sulfate Attack of Portland Cement—Invited

2005 ◽  
Vol 20 (2) ◽  
pp. 176-176
Author(s):  
K. Kurtis
Keyword(s):  
Portland Cement ◽  
Sulfate Attack ◽  
X Ray ◽  
Multi Mode

scholarly journals Evaluation of external sulfate attack (Na2SO4 and MgSO4): Portland cement mortars containing fillers

2020 ◽  
Vol 13 (3) ◽  
pp. 644-655 ◽  
Author(s):  
D. J. DE SOUZA ◽  
M. H. F. MEDEIROS ◽  
J. HOPPE FILHO
Keyword(s):  
Portland Cement ◽  
Linear Expansion ◽  
Sulfate Attack ◽  
Hardened Cement ◽  
X Ray Diffraction ◽  
Limestone Filler ◽  
Sulfate Ions ◽  
X Ray ◽  
Cement Mortars ◽  
Physical And Chemical

Abstract Sulfate attack is a term used to describe a series of chemical reactions between sulfate ions and hydrated compounds of the hardened cement paste. The present study aims to evaluate the physical (linear expansion, flexural and compressive strength) and mineralogical properties (X-ray diffraction) of three different mortar compositions (Portland Cement CPV-ARI with limestone filler and, with a quartz filler, in both cases with 10% replacement of the cement by weight) against sodium and magnesium sulfate attack (concentration of SO4 2- equal to 0.7 molar). The data collected indicate that the replacing the cement by the two fillers generate different results, the quartz filler presented a mitigating behaviour towards the sulfate, and the limestone filler was harmful to Portland cement mortars, in both physical and chemical characteristics.

Effect of S2Cl2Addition on the Sulfate Attack of Hydrated Portland Cement

2009 ◽  
Vol 51 (3) ◽  
pp. 110-115
Author(s):  
H. Aygül Yeprem ◽  
Selahattin Gökmen
Keyword(s):  
Portland Cement ◽  
Sulfate Attack

Phase composition depth profiles using spatially resolved energy dispersive X-ray diffraction

2004 ◽  
Vol 37 (6) ◽  
pp. 967-976 ◽  
Author(s):  
Andrew C. Jupe ◽  
Stuart R. Stock ◽  
Peter L. Lee ◽  
Nikhila N. Naik ◽  
Kimberly E. Kurtis ◽  
...  
Keyword(s):  
Phase Composition ◽  
Spatial Resolution ◽  
Zinc Coating ◽  
High Energy ◽  
Sulfate Attack ◽  
Energy Dispersive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spatially Resolved ◽  
Composition Profiles

Spatially resolved energy dispersive X-ray diffraction, using high-energy synchrotron radiation (∼35–80 keV), was used nondestructively to obtain phase composition profiles along the radii of cylindrical cement paste samples to characterize the progress of the chemical changes associated with sulfate attack on the cement. Phase distributions were acquired to depths of ∼4 mm below the specimen surface with sufficient spatial resolution to discern features less than 200 µm thick. The experimental and data analysis methods employed to obtain quantitative composition profiles are described. The spatial resolution that could be achieved is illustrated using data obtained from copper cylinders with a thin zinc coating. The measurements demonstrate that this approach is useful for nondestructively visualizing the sometimes complex transformations that take place during sulfate attack on cement-based materials. These transformations can be spatially related to microstructure as seen by computed microtomography.

How do bismuth-based nanomaterials function as promising theranostic agents for the tumor diagnosis and therapy?

2021 ◽  
Vol 28 ◽  
Author(s):  
Mengkui Ding ◽  
Jinyao Liu ◽  
Junlei Yang ◽  
Hui Wang ◽  
Xianjin Xie ◽  
...  
Keyword(s):  
Tumor Microenvironment ◽  
Photoacoustic Imaging ◽  
Computed Tomography Imaging ◽  
X Ray ◽  
Synergistic Enhancement ◽  
Tumour Location ◽  
X Ray Computed ◽  
Low Toxicity ◽  
Theranostic Agents ◽  
Multi Mode

: The complexity of tumor microenvironment and the diversity of tumors seriously affect the therapeutic effect, the focus, therefore, has gradually been shifted from monotherapy to combination therapy in clinical research in order to improve the curative effect. The synergistic enhancement interactions among multiple monotherapies majorly contribute to the birth of the multi-mode cooperative therapy, whose effect of the treatment is clearly stronger than that of any single therapy. In addition, the accurate diagnosis of the tumour location is also crucial to the treatment. Bismuth-based nanomaterials (NMs) hold great properties as promising theranostic platforms based on their many unique features that include low toxicity, excellent photothermal conversion efficiency as well as high ability of X-ray computed tomography imaging and photoacoustic imaging. In this review, we will introduce briefly the main features of tumor microenvironment first and its effect on the mechanism of nanomedicine actions and present the recent advances of bismuth-based NMs for diagnosis and photothermal therapy-based combined therapies using bismuth-based NMs are presented, which may provide a new way for overcoming drug resistance and hypoxia. At the end, further challenges and outlooks regarding this promising field are discussed accompanied with some design tips for bismuth-based NMs, hoping to provide researchers some inspirations to design safe and effective nanotherapeutic agents for the clinical treatments of cancers.

Deterioration of concrete containing limestone powder exposed to sulfate attack at ambient temperature

2021 ◽  
Vol 11 (5) ◽  
pp. 724-731
Author(s):  
Hemin Liu ◽  
Qian Huang ◽  
Liang Zhao
Keyword(s):  
Ambient Temperature ◽  
Sulfate Solution ◽  
Sulfate Attack ◽  
Limestone Powder ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mineral Phases ◽  
Adverse Influence ◽  
Powder Content ◽  
Scanning Electron

This study investigates the deterioration of concrete containing limestone powder exposed to sulfate solution under ambient temperature (20~25 °C). Microstructure and mineral phases within the attacked concrete were measured by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and X-ray diffraction (XRD). It was found that the addition of limestone powder increased the initial porosity of concrete. Consequently, a larger amount of SO2–4 ions diffused into the concrete containing limestone powder, and their degree of deterioration caused by sulfate attack increased with the increase in limestone powder content. At ambient temperature, gypsum and ettringite were the major attack products, respectively within the surface and nearsurface portions of concrete containing limestone powder, which was consistent with the products of sulfate attack within concrete without limestone powder. Therefore, the type and distribution of the attack products in concrete had not been revised due to the addition of limestone powder. Nevertheless, the adverse influence of limestone powder on the sulfate resistance of concrete, even at ambient temperature, should be considered. Furthermore, effective measures should be implemented to improve the durability of concrete containing limestone powder in this environment.

scholarly journals Mineralogical stabilization of Ternesite in Belite Sulfo-Aluminate Clinker elaborated from limestone, shale and phosphogypsum

2018 ◽  
Vol 149 ◽  
pp. 01073
Author(s):  
K. Ben Addi ◽  
A. Diouri ◽  
N. Khachani ◽  
A. Boukhari
Keyword(s):  
Infrared Spectroscopy ◽  
Phosphoric Acid ◽  
Portland Cement ◽  
Stability Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Stability

This paper investigates the mineralogical evolution of sulfoaluminate clinker elaborated from moroccan prime materials limestone, shale and phosphogypsum as a byproduct from phosphoric acid factories. The advantage of the production of this type of clinker is related to the low clinkerisation temperature which is known around 1250°C, and to less consumption quantity of limestone thus enabling less CO2 emissions during the decarbonation process compared to that of Portland cement. In this study we determine the stability conditions of belite sulfoaluminate clinker containing belite (C2S) ye’elimite (C4A3$) and ternesite (C5S2$). The hydration compounds of this clinker are also investigated. The monitoring of the synthesized and hydrated phases is performed by X-Ray Diffraction and Infrared spectroscopy. The results show the formation of ternesite at 800°C and the stabilization of clinker containing y’elminite, belite and ternesite at temperatures between 1100 and 1250°C.

Sign in / Sign up

Export Citation Format

Share Document