X-ray powder diffraction of RE6UO12 (RE=Eu, Gd, and Dy)

2001 ◽  
Vol 16 (4) ◽  
pp. 220-223 ◽  
Author(s):  
Hrudananda Jena ◽  
R. Asuvathraman ◽  
M. V. Krishnaiah ◽  
K. V. Govindan Kutty
Keyword(s):  
Combustion Method ◽  
Rhombohedral Structure ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
Solution Combustion ◽  
Rare Earth Ion ◽  
Solution Combustion Method ◽  
X Ray ◽  
Cell Parameters ◽  
Diffraction Patterns

Powder X-ray diffraction data are reported for RE6UO12 (RE=Eu, Gd, and Dy). The powders were prepared by a solution combustion method using urea as fuel. All compositions exhibit a rhombohedral structure with hexagonal unit cell parameters of a=1.012 67 (9) nm, c=0.9601 (1) nm for Eu6UO12; a=1.008 78 (6) nm, c=0.954 24 (7) nm for Gd6UO12; and a=0.998 06 (7) nm, c=0.944 03 (8) nm for Dy6UO12. The diffraction patterns of all the compounds are indexed on the R3¯ space group with Z=3. The a and c values decrease with increasing atomic number of the rare earth ion.

scholarly journals Bi3+ and Eu3+ Activated Luminescent Behaviors in Non-Stoichiometric LaO0.65F1.7 Structure

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2326
Author(s):  
Sungjun Yang ◽  
Sangmoon Park
Keyword(s):  
Optical Materials ◽  
Emission Spectra ◽  
Lattice Energy ◽  
Host Lattice ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Diffraction Patterns ◽  
Cation Sites

Optical materials composed of La1-p-qBipEuqO0.65F1.7 (p = 0.001–0.05, q = 0–0.1) were prepared via a solid-state reaction using La(Bi,Eu)2O3 and NH4F precursors at 1050 °C for two hours. X-ray diffraction patterns of the phosphors were obtained permitting the calculation of unit-cell parameters. The two La3+ cation sites were clearly distinguished by exploiting the photoluminescence excitation and emission spectra through Bi3+ and Eu3+ transitions in the non-stoichiometric host lattice. Energy transfer from Bi3+ to Eu3+ upon excitation with 286 nm radiation and its mechanism in the Bi3+- and Eu3+-doped host structures is discussed. The desired Commission Internationale de l’Eclairage values, including emissions in blue-green, white, and red wavelength regions, were obtained from the Bi3+- and Eu3+-doped LaO0.65F1.7 phosphors.

scholarly journals Improvement of the Photocatalytic Activity of ZnO/Burkeite Heterostructure Prepared by Combustion Method

Catalysts ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 817 ◽  
Author(s):  
A. Luna-Flores ◽  
M.A. Morales ◽  
R. Agustín-Serrano ◽  
R. Portillo ◽  
J.A. Luna-López ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
Solution Combustion ◽  
Solution Combustion Method ◽  
X Ray ◽  
Sem Image ◽  
Particle Aggregates ◽  
One Step ◽  
Ph Dependent

In this work, a novel route is discussed to produce in one step ZnO/Burkeite powders by the modified solution combustion method. The ZnO particles enhance the photocatalytic activity in the degradation of Rhodamine B, in which Burkeite mineral acts as a support due to the pH-dependent morphology of the particle aggregates of the as-synthesized powders. The X-ray diffraction (XRD) characterization shows the presence of a heterostructure: ZnO/Burkeite. The Scanning Electron Microscopy (SEM) image shows a morphological dependence with the pH of the solution used for the synthesis. The results show that the system with the highest degradation (92.4%) corresponds to the case in which ZnO/Burkeite heterostructure was synthesized with a pH 11.

Structure analysis of CaTi1−xSnxO3 (x = 0.0–1.0) solid solutions

2014 ◽  
Vol 29 (3) ◽  
pp. 254-259 ◽  
Author(s):  
Naoki Takani ◽  
Hisanori Yamane
Keyword(s):  
Solid State ◽  
Solid Solutions ◽  
Solid State Reaction ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Diffraction Patterns ◽  
Perovskite Type ◽  
Perovskite Type Structure

CaTi1−xSnxO3 (x = 0.0–1.0) solid solutions were prepared by solid-state reaction at 1450 °C. Rietveld refinement of their powder X-ray diffraction patterns revealed that all the solid solutions crystallized in orthorhombic cells with the perovskite-type structure, the space group Pbnm. The refined unit-cell parameters linearly increased with nominal tin contents x.

EFFECT OF STRONTIUM DOPING ON NANOSTRUCTURE AND CHROMATICITY OF Y2O3:Eu COMPOUNDS

2011 ◽  
Vol 25 (22) ◽  
pp. 2949-2956 ◽  
Author(s):  
ALI MOHAMMADI ◽  
YADOLAH GANJKHANLOU ◽  
MAHMOOD KAZEMZAD ◽  
ABDOLMAJID BAYANDORI MOGHADDAM ◽  
FEREIDOUN ALIKHANI HESSARI ◽  
...  
Keyword(s):  
Emission Spectra ◽  
Photo Luminescence ◽  
Combustion Method ◽  
Urea Solution ◽  
Photoluminescence Intensity ◽  
X Ray Diffraction ◽  
Solution Combustion ◽  
Solution Combustion Method ◽  
X Ray ◽  
Transmission Electron

In this work, various nano-sized samples of Y 2 O 3, Y 2 O 3 :Eu and Y 2 O 3 :Eu , Sr were prepared by urea solution combustion method. Then the resultant nanopowders were investigated by means of X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR) and photo-luminescence emission spectra. Furthermore, the CIE color coordinate of samples were calculated from photoluminescence emission spectra. Results showed that by doping of strontium, the photoluminescence intensity and chromaticity of Y 2 O 3: Eu phosphor was enhanced while crystallite size was decreased.

Powder-Pattern: A System of Programs for Processing and Interpreting Powder Diffraction Data

1982 ◽  
Vol 26 ◽  
pp. 63-72 ◽  
Author(s):  
Nikos P. Pyrros ◽  
Camden R. Hubbard
Keyword(s):  
Unit Cell ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters ◽  
Pure Phase ◽  
Diffraction Patterns ◽  
Better Than ◽  
Good Agreement

The production of standard x-ray diffraction patterns at NBS imposes special requirements in the data processing of powder patterns. The patterns should be complete and have an overall accuracy of better than 0.01 degree two theta. To ensure completeness all the observable peaks should be indexed. To make certain that the sample is a pure phase, weak peaks have to be identified as well.The indexing of all the peaks implies that the cell constants must be known and there should be a good agreement between all the calculated and observed peak positions. In practice this is achieved by a least-squares refinement of the unit cell parameters. This serves as a test of the assumed unit cell and also as an interpretation of the observed peaks. Finally, an attempt is made to identify the space group. This step also requires the identification of weak peaks. The agreement of a known space group with the observed reflections further confirms the purity of the sample.

Barium hollandite-type compounds BaxFe2xTi8−2xO16 with x=1.143 and 1.333

1999 ◽  
Vol 14 (1) ◽  
pp. 31-35 ◽  
Author(s):  
J. M. Loezos ◽  
T. A. Vanderah ◽  
A. R. Drews
Keyword(s):  
Phase Transition ◽  
High Temperature ◽  
Powder Diffraction ◽  
Framework Structure ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Diffraction Patterns ◽  
Acta Crystallogr

Experimental X-ray powder diffraction patterns and refined unit cell parameters for two barium hollandite-type compounds, BaxFe2xTi8−2xO16, with x=1.143 and 1.333, are reported here. Compared to the tetragonal parent structure, both compounds exhibit monoclinic distortions that increase with Ba content [Ba1.333Fe2.666Ti5.334O16: a=10.2328(8), b=2.9777(4), c=9.899(1) Å, β=91.04(1)°, V=301.58(5) Å3, Z=1, ρcalc=4.64 g/cc; Ba1.143Fe2.286Ti5.714O16: a=10.1066(6), b=2.9690(3), c=10.064(2) Å, β=90.077(6)°, V=301.98(4) Å3, Z=1, ρcalc=4.48 g/cc]. The X-ray powder patterns for both phases contain a number of broad, weak superlattice peaks attributed to ordering of the Ba2+ ions within the tunnels of the hollandite framework structure. According to the criteria developed by Cheary and Squadrito [Acta Crystallogr. B 45, 205 (1989)], the observed positions of the (0k1)/(1k0) superlattice peaks are consistent with the nominal x-values of both compounds, and the k values calculated from the corresponding d-spacings suggest that the Ba ordering within the tunnels is commensurate for x=1.333 and incommensurate for x=1.143. High-temperature X-ray diffraction data indicate that the x=1.333 compound undergoes a monoclinic→tetragonal phase transition between 310 and 360 °C.

scholarly journals Catalytic oxidation of CO over CuO/CeO2 nanocomposites synthesized via solution combustion method: effect of fuels

2020 ◽  
Vol 59 (1) ◽  
pp. 131-143 ◽  
Author(s):  
Thanh Son Cam ◽  
Tatyana Alekseevna Vishnievskaia ◽  
Vadim Igorevich Popkov
Keyword(s):  
Low Temperature ◽  
Co Oxidation ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
Solution Combustion ◽  
Solution Combustion Method ◽  
X Ray ◽  
Low Temperature Co Oxidation ◽  
Temperature Programmed ◽  
Adsorption Desorption

AbstractA series of CuO/CeO2 catalysts were successfully synthesized via solution combustion method (SCS) using different fuels and tested for CO oxidation. The catalysts were characterized by energy-dispersive X-ray analysis (EDXA), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), N2 adsorption-desorption isotherms and H2 temperature-programmed reduction (H2-TPR). It was found that the used fuels strongly affected the characterization and the low-temperature reduction behavior of CuO/CeO2 catalysts. The CuO/CeO2-urea catalyst exhibited higher catalytic activity toward CO oxidation (t50=120∘C, t100=159∘C) than the 5 other synthesized catalysts. In addition, the CuO/CeO2-urea catalyst displayed high stability for CO oxidation during five cycles and water resistance. The enhanced catalytic CO oxidation of the synthesized samples can be attributed by a combination of factors, such as smaller crystallite size, higher specific surface area, larger amount of amorphous copper(II) oxide, more mesoporous and uniform spherical-like structure. These findings are worth considering in order to continue the study of the CuO/CeO2 catalyst with low-temperature CO oxidation.

scholarly journals Green Synthesis of Ni-Cu-Zn Based Nanosized Metal Oxides for Photocatalytic and Sensor Applications

Crystals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1467
Author(s):  
Mir Waqas Alam ◽  
Muhammad Aamir ◽  
Mohd Farhan ◽  
Maryam Albuhulayqah ◽  
Mohamad M. Ahmad ◽  
...  
Keyword(s):  
Metal Oxides ◽  
Transition Metal Oxides ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
Solution Combustion ◽  
Solution Combustion Method ◽  
Visible Absorption ◽  
X Ray ◽  
Sensor Applications ◽  
Synthesized Materials

The preparation, characterization, and application of Nickel oxide (NiO)–Copper oxide (CuO)–Zinc oxide (ZnO) transition nanometal oxides have significantly enhanced their tunable properties for superior multifunctional performances compared with well-known metal oxides. NiO–CuO–ZnO nano transition metal oxides were synthesized by a simple eco-friendly solution combustion method. X-ray diffraction studies revealed distinct phases such as monoclinic, cubic, and hexagonal wurtzite for CuO, NiO, and ZnO, respectively, with NiO having the highest composition. The particle sizes were found to be in the range between 25 and 60 nm, as determined by powder X-ray diffraction. The energy bandgap values were found to be 1.63, 3.4, and 4.2 eV for CuO, ZnO, and NiO, respectively. All metal oxides exhibited a moderate degradation efficiency for AR88 dye. The results of ultraviolet–visible absorption spectra helped identify the bandgap of metal oxides and a suitable wavelength for photocatalytic irradiation. Finally, we concluded that the electrochemical studies revealed that the synthesized materials are well suitable for sensor applications.

Structure Studies of Electrodeposited Ni-Mo Alloys with Polymers after Annealing

2007 ◽  
Vol 130 ◽  
pp. 97-100 ◽  
Author(s):  
Małgorzata Karolus ◽  
Edward Rówiński ◽  
Eugeniusz Łągiewka
Keyword(s):  
Solid Solution ◽  
Steel Substrate ◽  
Argon Atmosphere ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Air Atmosphere ◽  
Diffraction Patterns

Electrolytical layers of Ni-Mo alloys with polypyrrole, polytiofene and polyethylene were deposited on steel substrate (St3S, 4 cm2). After structural analyses of as quenched samples performed by X-ray diffraction it was noticed that the solid solution of Mo in Ni is observed. After annealing in an argon atmosphere the solid solution of Mo in Ni is becomeing more stable and crystalites are growing to the size of 200 – 300 Å. After annealing in an air atmosphere X-ray diffraction patterns show presence of phases: NiO, MoO, NiCO3, Mo2N. The unit cell parameters of solid solution after annealing are smaller than parameters of as quenched samples what means that the solid solution has been decomposing.

Microstructural evolution of mullites produced from single-phase gels

2007 ◽  
Vol 40 (2) ◽  
pp. 260-276 ◽  
Author(s):  
Marek Andrzej Kojdecki ◽  
Esther Ruiz de Sola ◽  
Francisco Javier Serrano ◽  
Estefanía Delgado-Pinar ◽  
María Mercedes Reventós ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Unit Cell ◽  
Molar Ratio ◽  
Model Parameters ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Transmission Electron ◽  
Diffraction Patterns

The crystalline microstructure of mullites obtained by heating monophasic gels has been investigated. Gels with alumina to silica molar ratio of 3:2 (as in secondary mullite) and 2:1 (as in primary mullite) were prepared by gelling mixtures of aluminium nitrate and tetraethylorthosilicate. Phase transformations were induced by heating the gel precursors, with different final treatment temperatures between 1173 and 1873 K. The mullites formed as a result of thermal treatment were studied by means of X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The crystalline structure (unit-cell parameters) and microstructure were determined from X-ray diffraction patterns. The formation of mullites of homogeneous chemical composition and with unit-cell parameters depending almost linearly on the treatment temperature was found. Their compositions, expressed as alumina to silica molar ratio, were determined from the unit-cell parameters and were in the range of those characterizing primary and secondary mullites. Mullites processed at lower temperatures were accompanied by small amounts of vitreous phase. The crystalline microstructure of the obtained mullites was interpreted by means of a mathematical model of polycrystalline material, involving prevalent crystallite shape, volume-weighted crystallite size distribution and second-order crystalline lattice strain distribution as model parameters. The model parameters were determined for each sample by modelling its X-ray diffraction pattern and fitting it to a measured pattern. Bimodality of the size distribution was observed and explained as a consequence of two crystallite nucleation and growth processes, which started from small alumina-rich and alumina-poor domains, spontaneously formed in a precursor gel at early stages of heating. Images produced by scanning and transmission electron microscopy agreed well with the characteristics obtained from the analysis of the X-ray diffraction patterns.

Sign in / Sign up

Export Citation Format

Share Document