Odd Random Phase Electrochemical Impedance Spectroscopy to Study the Corrosion Behavior of Hot Dip Zn and Zn-Alloy Coated Steel Wires in Sodium Chloride Solution

2018 ◽  
Vol 165 (5) ◽  
pp. C246-C257 ◽  
Author(s):  
Gopal Ji ◽  
Lucía Fernández Macía ◽  
Bart Allaert ◽  
Annick Hubin ◽  
Herman Terryn
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Sodium Chloride ◽  
Impedance Spectroscopy ◽  
Chloride Solution ◽  
Sodium Chloride Solution ◽  
Electrochemical Impedance ◽  
Random Phase ◽  
Coated Steel ◽  
Steel Wires ◽  
Zn Alloy

scholarly journals Sage Extract as a Natural Source of Corrosion Inhibitor for Tinplate in 3.0 % NaCl

2021 ◽  
Vol 59 (4) ◽  
Author(s):  
Maja Dent ◽  
Regina Fuchs-Godec
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Sodium Chloride ◽  
Impedance Spectroscopy ◽  
Corrosion Inhibitor ◽  
Chloride Solution ◽  
Sodium Chloride Solution ◽  
Corrosion Inhibitors ◽  
Electrochemical Impedance ◽  
Low Cost ◽  
Green Inhibitor

Research background. Due to the growing interest and attention of the world towards environmental problems and protection of environment, the worldwide demand for biodegradable and effective corrosion inhibitors for tinplate has grown. Considering the diversity of the structures of polyphenols that are present in sage extract, it represents a promising potential source of low-cost and biodegradable effective green corrosion inhibitors for tinplate in 3.0 % sodium chloride solution which is evaluated in this study. Experimental approach. Tafel polarization and electrochemical impedance spectroscopy (EIS) at 25 °C has been used to evaluate the inhibition action of sage (Salvia officinalis, L.) extract as a green inhibitor for the corrosion protection for tinplate in 3.0 % sodium chloride solution. Results and conclusions. Electrochemical impedance spectroscopy has been used to show that sage extract could serve as an effective inhibitor (90.2 %) for the corrosion of tinplate in 3.0 % NaCl at a concentration of 0.2 mg/L, and temperature of 25 °C. The results obtained from potentiodynamic polarization have revealed that the sage extract inhibitor acts as a mixed type, with inhibition efficiency up to 82.5% and the inhibition efficiencies calculated from EIS are in close agreement with those results. FTIR results indicated that the inhibitory effect of the sage extract is due to the presence of a passivation layer on the tinplate surface, which consists of organic compounds such as polyphenols. It has been confirmed by these results that the sage extract is more efficient at inhibiting the corrosion of tinplate at a concentration of 0.2 mg/L than in higher concentrations. Also, it exhibits good inhibitive performance for tinplate in 3 % sodium chloride solution. Novelty and scientific contributions. The exceptional corrosion potential of sage extract opens a door for its use and revalorization as a green corrosion inhibitor in the food industry.

Corrosion study on Al-rich metal-coated steel by odd random phase multisine electrochemical impedance spectroscopy

2014 ◽  
Vol 124 ◽  
pp. 165-175 ◽  
Author(s):  
A. Alvarez-Pampliega ◽  
T. Hauffman ◽  
M. Petrova ◽  
T. Breugelmans ◽  
T. Muselle ◽  
...  
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Electrochemical Impedance ◽  
Random Phase ◽  
Coated Steel ◽  
Corrosion Study

scholarly journals Corrosion Behavior of CoCrFeNiTax Alloys in 1 M Sodium Chloride Aqueous Solution

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5157
Author(s):  
Chun-Huei Tsau ◽  
Rong-Wei Hsiao ◽  
Tien-Yu Chien
Keyword(s):  
Aqueous Solution ◽  
Corrosion Resistance ◽  
Electrochemical Impedance Spectroscopy ◽  
Sodium Chloride ◽  
Corrosion Behavior ◽  
Chloride Solution ◽  
Sodium Chloride Solution ◽  
Electrochemical Impedance ◽  
Eutectic Structure ◽  
Different Temperatures

This paper investigates the effects of Ta content on the microstructures, hardness and corrosion behavior of as-cast CoCrFeNiTax alloys. The results indicate that the addition of Ta can change the microstructures of these alloys to dual-phased structures (FCC + HCP), as well as increasing their hardness. This study uses constant galvanostatic/potentiometric methods to measure the polarization curves of CoCrFeNiTa0.1, CoCrFeNiTa0.3 and CoCrFeNiTa0.5 alloys in deaerated 1 M sodium chloride solution at different temperatures. Electrochemical impedance spectroscopy is also used to analyze these alloys in sodium chloride solution. The results indicate that the CoCrFeNiTa0.5 alloy has a eutectic structure and the highest hardness. Furthermore, although the CoCrFeNiTa0.5 alloy has the best corrosion resistance, the CoCrFeNiTa0.3 alloy has the best pitting resistance among these alloys.

Corrosion of Amorphous Fe73.5Si13.5B9Nb3Cu1 Alloys on the Synergistic Effect of Chloride and Hydroxyl Ions

2011 ◽  
Vol 284-286 ◽  
pp. 1550-1553
Author(s):  
Ming Sheng Li ◽  
Dan Zhang ◽  
Yi Ming Jiang ◽  
Jin Li
Keyword(s):  
Magnetic Properties ◽  
Electrochemical Impedance Spectroscopy ◽  
Sodium Chloride ◽  
Impedance Spectroscopy ◽  
Service Life ◽  
Corrosion Rate ◽  
Electrochemical Impedance ◽  
Soft Magnetic Properties ◽  
High Concentration ◽  
Soft Magnetic

The soft-magnetic properties and service life of amorphous or nanocrystalline Fe73.5Si13.5B9Nb3Cu1 have been influenced by the corrosion of the alloy. In this study, the electrochemical corrosions of amorphous Fe73.5Si13.5B9Nb3Cu1 in the blend solutions of sodium chloride and sodium hydroxide were investigated by linear polarization (PLZ) and electrochemical impedance spectroscopy (EIS) technique. The presence of OH- in the blend solution gave rise to typical passivation of the alloy. A suitable concentration of OH- was required for the low corrosion rate. And the higher concentration of OH- led to a faster corrosion. Increase of concentration of Cl- aroused more obvious corrosion. These results were ascribed to the deteriorating effect of Cl- and high-concentration OH- on the passive film formed on the surface of amorphous Fe73.5Si13.5B9Nb3Cu1.

Measuring the adsorption of ethanol on aluminium oxides using odd random phase multisine electrochemical impedance spectroscopy

2012 ◽  
Vol 22 ◽  
pp. 124-127 ◽  
Author(s):  
Tom Hauffman ◽  
Tom Breugelmans ◽  
Yves van Ingelgem ◽  
Els Tourwé ◽  
Herman Terryn ◽  
...  
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Electrochemical Impedance ◽  
Random Phase

scholarly journals Effects of Sodium Phosphate and Sodium Nitrite on the Pitting Corrosion Process of X70 Carbon Steel in Sodium Chloride Solution

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5392
Author(s):  
Yongyan Zhu ◽  
Jiayi Ding ◽  
Jianli Zhang ◽  
Liang Li
Keyword(s):  
Sodium Chloride ◽  
Carbon Steel ◽  
Sodium Nitrite ◽  
Pitting Corrosion ◽  
Chloride Solution ◽  
Sodium Phosphate ◽  
Sodium Chloride Solution ◽  
Electrochemical Impedance ◽  
Protective Oxide ◽  
Salt Film

In this paper, effects of sodium phosphate (Na3PO4) and sodium nitrite (NaNO2) on the pitting corrosion of X70 carbon steel in 0.10 mol/L NaCl solution were investigated by potentiodynamic polarization technique, electrochemical impedance spectroscopy (EIS) method, scanning electron microscope (SEM) and scanning electrochemical microscope (SECM). The SECM equipment was used to observe the dynamic processes of the pitting corrosion in situ. Na3PO4 or NaNO2 in the sodium chloride solution decreased the local anodic dissolution and increased the pitting resistance of the specimen. By analysis and comparison, it can be concluded that the inhibition effect of Na3PO4 is mainly due to the formation of a salt film, while the corrosion inhibition of NaNO2 is principally attributed to a protective oxide film on the electrode surface.

scholarly journals Enhanced Corrosion Protection of Epoxy/ZnO-NiO Nanocomposite Coatings on Steel

Coatings ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 783 ◽  
Author(s):  
Muna Ibrahim ◽  
Karthik Kannan ◽  
Hemalatha Parangusan ◽  
Shady Eldeib ◽  
Omar Shehata ◽  
...  
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Corrosion Protection ◽  
Electrochemical Impedance ◽  
Sol Gel ◽  
Morphological Characterization ◽  
Coated Steel ◽  
X Ray ◽  
Edax Analysis

ZnO-NiO nanocomposite with epoxy coating on mild steel has been fabricated by the sol–gel assisted method. The synthesized sample was used to study corrosion protection. The analysis was performed by electrochemical impedance spectroscopy in 3.5% NaCl solution. The structural and morphological characterization of the metal oxide nanocomposite was carried out using XRD and SEM with Energy Dispersive Absorption X-ray (EDAX) analysis. XRD reveals the ZnO-NiO (hexagonal and cubic) structure with an average ZnO-NiO crystallite size of 26 nm. SEM/EDAX analysis of the ZnO-NiO nanocomposite confirms that the chemical composition of the samples consists of: Zn (8.96 ± 0.11 wt.%), Ni (10.53 ± 0.19 wt.%) and O (80.51 ± 3.12 wt.%). Electrochemical Impedance Spectroscopy (EIS) authenticated that the corrosion resistance has improved for the nanocomposites of ZnO-NiO coated along with epoxy on steel in comparison to that of the pure epoxy-coated steel.

Sign in / Sign up

Export Citation Format

Share Document