Development of a Wire Reference Electrode for Lithium All-Solid-State Batteries with Polymer Electrolyte: FEM Simulation and Experiment

2018 ◽  
Vol 165 (7) ◽  
pp. A1363-A1371 ◽  
Author(s):  
Fabian J. Simon ◽  
Leonard Blume ◽  
Matthias Hanauer ◽  
Ulrich Sauter ◽  
Jürgen Janek
Keyword(s):  
Solid State ◽  
Polymer Electrolyte ◽  
Fem Simulation ◽  
Reference Electrode ◽  
Simulation And Experiment ◽  
Solid State Batteries ◽  
All Solid State Batteries

A polyoxometalate-based polymer electrolyte with an improved electrode interface and ion conductivity for high-safety all-solid-state batteries

2019 ◽  
Vol 7 (26) ◽  
pp. 15924-15932 ◽  
Author(s):  
Xiangfei Yuan ◽  
Cui Sun ◽  
Jia-Ning Duan ◽  
Jingmin Fan ◽  
Ruming Yuan ◽  
...  
Keyword(s):  
Solid State ◽  
Polymer Electrolyte ◽  
Ion Conductivity ◽  
Solid State Batteries ◽  
Electrode Interface ◽  
All Solid State Batteries

By combining inorganic LVC with organic PEO matrix, a polyoxometalate-based polymer electrolyte (PPE) was constructed for solid state batteries.

scholarly journals Increased Ion Conductivity in Composite Solid Electrolytes With Porous Co3O4 Cuboids

2021 ◽  
Vol 8 ◽  
Author(s):  
Qiongyu Zhou ◽  
Songli Liu ◽  
Shiju Zhang ◽  
Yong Che ◽  
Li-Hua Gan
Keyword(s):  
Solid State ◽  
Ionic Conductivity ◽  
Polymer Electrolyte ◽  
Polymer Electrolytes ◽  
Composite Polymer Electrolyte ◽  
Composite Polymer ◽  
Composite Electrolyte ◽  
Base Interaction ◽  
Solid State Batteries ◽  
All Solid State Batteries

Compared with the fagile ceramic solid electrolyte, Li-ion conducting polymer electrolytes are flexible and have better contact with electrodes. However, the ionic conductivity of the polymer electrolytes is usually limited because of the slow segment motion of the polymer. In this work, we introduce porous Co3O4 cuboids to Poly (Ethylene Oxide)-based electrolyte (PEO) to investigate the influence of these cuboids on the ionic conductivity of the composite electrolyte and the performance of the all-solid-state batteries. The experiment results showed the porous cuboid Co3O4 fillers not only break the order motion of segments of the polymer to increase the amorphous phase amount, but also build Li+ continuous migration pathway along the Co3O4 surface by the Lewis acid-base interaction. The Li+ conductivity of the composite polymer electrolyte reaches 1.6 × 10−4 S cm−1 at 30°C. The good compatibility of the composite polymer electrolyte to Li metal anode and LiFePO4 cathode ensures good rate performance and long cycle life when applying in an all-solid-state LiFePO4 battery. This strategy points out the direction for developing the high-conducting composite polymer electrolytes for all-solid-state batteries.

scholarly journals Lithium-ion-conductive sulfide polymer electrolyte with disulfide bond-linked PS4 tetrahedra for all-solid-state batteries

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Atsutaka Kato ◽  
Mari Yamamoto ◽  
Futoshi Utsuno ◽  
Hiroyuki Higuchi ◽  
Masanari Takahashi
Keyword(s):  
Solid State ◽  
Polymer Electrolyte ◽  
High Capacity ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Capacity Fading ◽  
Enhanced Solubility ◽  
Solid State Batteries ◽  
All Solid State Batteries

AbstractDue to their high conductivity and interface formability, sulfide electrolytes are attractive for use in high energy density all-solid-state batteries. However, electrode volume changes during charge-discharge cycling typically cause mechanical contact losses at the electrode/electrolyte interface, which leads to capacity fading. Here, to suppress this contact loss, isolated PS43- anions are reacted with iodine to prepare a sulfide polymer electrolyte that forms a sticky gel during dispersion in anisole and drying of the resulting supernatant. This polymer, featuring flexible (–P–S–S–)n chains and enhanced solubility in anisole, is applied as a lithium-ion-conductive binder in sheet-type all-solid-state batteries, creating cells with low resistance and high capacity retention.

scholarly journals Li7La3Zr2O12 Garnet Solid Polymer Electrolyte for Highly Stable All-Solid-State Batteries

2021 ◽  
Vol 8 ◽  
Author(s):  
Quoc Hung Nguyen ◽  
Van Tung Luu ◽  
Hoang Long Nguyen ◽  
Young-Woo Lee ◽  
Younghyun Cho ◽  
...  
Keyword(s):  
Solid State ◽  
Polymer Electrolyte ◽  
Polymer Electrolytes ◽  
Solid Polymer Electrolytes ◽  
Solid Polymer ◽  
Composite Electrolyte ◽  
Electrolyte Membrane ◽  
Solid State Batteries ◽  
Current Densities ◽  
All Solid State Batteries

All-solid-state batteries have gained significant attention as promising candidates to replace liquid electrolytes in lithium-ion batteries for high safety, energy storage performance, and stability under elevated temperature conditions. However, the low ionic conductivity and unsuitability of lithium metal in solid polymer electrolytes is a critical problem. To resolve this, we used a cubic garnet oxide electrolyte (Li7La3Zr2O12 – LLZO) and ionic liquid in combination with a polymer electrolyte to produce a composite electrolyte membrane. By applying a solid polymer electrolyte on symmetric stainless steel, the composite electrolyte membrane shows high ionic conductivity at elevated temperatures. The effect of LLZO in suppressing lithium dendrite growth within the composite electrolyte was confirmed through symmetric lithium stripping/plating tests under various current densities showing small polarization voltages. The full cell with lithium iron phosphate as the cathode active material achieved a highest specific capacity of 137.4 mAh g−1 and a high capacity retention of 98.47% after 100 cycles at a current density of 50 mA g−1 and a temperature of 60°C. Moreover, the specific discharge capacities were 137 and 100.8 mAh g−1 at current densities of 100 and 200 mA g−1, respectively. This research highlights the capability of solid polymer electrolytes to suppress the evolution of lithium dendrites and enhance the performance of all-solid-state batteries.

Development of Solid Electrolytes for All-Solid-State Batteries

2019 ◽  
Vol 92 (11) ◽  
pp. 430-434
Author(s):  
Akitoshi HAYASHI ◽  
Atsushi SAKUDA ◽  
Masahiro TATSUMISAGO
Keyword(s):  
Solid State ◽  
Solid Electrolytes ◽  
Solid State Batteries ◽  
All Solid State Batteries

Rational Design of Quasi Zero-Strain NCM Cathode Materials for Minimizing Volume Change Effects in All-Solid-State Batteries

2019 ◽  
Author(s):  
Florian Strauss ◽  
Lea de Biasi ◽  
A-Young Kim ◽  
Jonas Hertle ◽  
Simon Schweidler ◽  
...  
Keyword(s):  
Solid State ◽  
Solid Electrolyte ◽  
Cathode Materials ◽  
Rational Design ◽  
Electrode Materials ◽  
Cycling Performance ◽  
Mechanical Degradation ◽  
Volume Changes ◽  
Solid State Batteries ◽  
All Solid State Batteries

Measures to improve the cycling performance and stability of bulk-type all-solid-state batteries (SSBs) are currently being developed with the goal of substituting conventional Li-ion battery (LIB) technology. As known from liquid electrolyte based LIBs, layered oxide cathode materials undergo volume changes upon (de)lithiation, causing mechanical degradation due to particle fracture, among others. Unlike solid electrolytes, liquid electrolytes are somewhat capable of accommodating morphological changes. In SSBs, the rigidity of the materials used typically leads to adverse contact loss at the interfaces of cathode material and solid electrolyte during cycling. Hence, designing zero- or low-strain electrode materials for application in next-generation SSBs is desirable. In the present work, we report on novel Co-rich NCMs, NCM361 (60% Co) and NCM271 (70% Co), showing minor volume changes up to 4.5 V vs Li<sup>+</sup>/Li, as determined by <i>operando</i> X-ray diffraction and pressure measurements of LIB pouch and pelletized SSB cells, respectively. Both cathode materials exhibit good cycling performance when incorporated into SSB cells using argyrodite Li<sub>6</sub>PS<sub>5</sub>Cl solid electrolyte, albeit their morphology and secondary particle size have not yet been optimized.

Rational Design of Quasi Zero-Strain NCM Cathode Materials for Minimizing Volume Change Effects in All-Solid-State Batteries

2019 ◽  
Author(s):  
Florian Strauss ◽  
Lea de Biasi ◽  
A-Young Kim ◽  
Jonas Hertle ◽  
Simon Schweidler ◽  
...  
Keyword(s):  
Solid State ◽  
Solid Electrolyte ◽  
Cathode Materials ◽  
Rational Design ◽  
Electrode Materials ◽  
Cycling Performance ◽  
Mechanical Degradation ◽  
Volume Changes ◽  
Solid State Batteries ◽  
All Solid State Batteries

Measures to improve the cycling performance and stability of bulk-type all-solid-state batteries (SSBs) are currently being developed with the goal of substituting conventional Li-ion battery (LIB) technology. As known from liquid electrolyte based LIBs, layered oxide cathode materials undergo volume changes upon (de)lithiation, causing mechanical degradation due to particle fracture, among others. Unlike solid electrolytes, liquid electrolytes are somewhat capable of accommodating morphological changes. In SSBs, the rigidity of the materials used typically leads to adverse contact loss at the interfaces of cathode material and solid electrolyte during cycling. Hence, designing zero- or low-strain electrode materials for application in next-generation SSBs is desirable. In the present work, we report on novel Co-rich NCMs, NCM361 (60% Co) and NCM271 (70% Co), showing minor volume changes up to 4.5 V vs Li<sup>+</sup>/Li, as determined by <i>operando</i> X-ray diffraction and pressure measurements of LIB pouch and pelletized SSB cells, respectively. Both cathode materials exhibit good cycling performance when incorporated into SSB cells using argyrodite Li<sub>6</sub>PS<sub>5</sub>Cl solid electrolyte, albeit their morphology and secondary particle size have not yet been optimized.

Operando Visualization of Morphological Dynamics in All-Solid-State Batteries

2019 ◽  
Author(s):  
Xiaohan Wu ◽  
Juliette Billaud ◽  
Iwan Jerjen ◽  
Federica Marone ◽  
Yuya Ishihara ◽  
...  
Keyword(s):  
Solid State ◽  
Solid Electrolytes ◽  
Rational Design ◽  
Morphological Evolution ◽  
Active Material ◽  
Composite Layer ◽  
Transference Number ◽  
Thermal Stabilities ◽  
Solid State Batteries ◽  
All Solid State Batteries

<div> <div> <div> <p>All-solid-state batteries are considered as attractive options for next-generation energy storage owing to the favourable properties (unit transference number and thermal stabilities) of solid electrolytes. However, there are also serious concerns about mechanical deformation of solid electrolytes leading to the degradation of the battery performance. Therefore, understanding the mechanism underlying the electro-mechanical properties in SSBs are essentially important. Here, we show three-dimensional and time-resolved measurements of an all-solid-state cell using synchrotron radiation x-ray tomographic microscopy. We could clearly observe the gradient of the electrochemical reaction and the morphological evolution in the composite layer. Volume expansion/compression of the active material (Sn) was strongly oriented along the thickness of the electrode. While this results in significant deformation (cracking) in the solid electrolyte region, we also find organized cracking patterns depending on the particle size and their arrangements. This study based on operando visualization therefore opens the door towards rational design of particles and electrode morphology for all-solid-state batteries. </p> </div> </div> </div>

scholarly journals Structural Investigation of NCM-Cathode-LLZO-Electrolyte Composites as Promising Candidates for All-Solid-State Batteries Using (Cryo) STEM and PED

2021 ◽  
Vol 27 (S1) ◽  
pp. 1978-1979
Author(s):  
Thomas Demuth ◽  
Till Fuchs ◽  
Anuj Pokle ◽  
Andreas Beyer ◽  
Jürgen Janek ◽  
...  
Keyword(s):  
Solid State ◽  
Structural Investigation ◽  
Solid State Batteries ◽  
All Solid State Batteries
Sign in / Sign up

Export Citation Format

Share Document