A Stitching Algorithm to Identify Wide-Bandwidth Electrochemical Impedance Spectra for Li-Ion Batteries Using Binary Perturbations

2018 ◽  
Vol 165 (9) ◽  
pp. A1679-A1684 ◽  
Author(s):  
Peter J. Weddle ◽  
Robert J. Kee ◽  
Tyrone Vincent
Keyword(s):  
Electrochemical Impedance ◽  
Impedance Spectra ◽  
Li Ion Batteries ◽  
Wide Bandwidth ◽  
Electrochemical Impedance Spectra ◽  
Li Ion

SPINEL Li2MTi3O8(M = Mg, Mg0.5Zn0.5) NANOWIRES WITH ENHANCED ELECTROCHEMICAL LITHIUM STORAGE

2011 ◽  
Vol 04 (01) ◽  
pp. 65-69 ◽  
Author(s):  
ZHENSHENG HONG ◽  
TONGBIN LAN ◽  
YONGZAN ZHENG ◽  
LILONG JIANG ◽  
MINGDENG WEI
Keyword(s):  
Solid State ◽  
Anode Materials ◽  
Electrochemical Impedance ◽  
Impedance Spectra ◽  
Li Ion Battery ◽  
Lithium Storage ◽  
Electrochemical Impedance Spectra ◽  
Titanate Nanowires ◽  
Li Ion ◽  
First Time

Spinel structural Li2MTi3O8 ( M = Mg, Mg0.5Zn0.5 ) nanowires have been successfully synthesized using titanate nanowires as a precursor and then have been used for the first time as anode materials in a rechargeable Li -ion battery. The cell composed of Li2MgTi3O8 nanowires exhibited a discharge capacity of 232 mAhg-1 at the second cycle, while only 159 mAhg-1 was obtained for the bulk prepared by a solid state reaction. The results of electrochemical impedance spectra indicate that spinel structural Li2MTi3O8 ( M = Mg, Mg0.5Zn0.5 ) nanowires can significantly reduce the charge transfer impedance, leading to enhanced capability of electrochemical lithium storage.

Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ-Ag Composite Cathode Materials for IT-SOFCs

2011 ◽  
Vol 311-313 ◽  
pp. 2309-2314 ◽  
Author(s):  
Wen Xia Zhu ◽  
Zhe Lü ◽  
Le Xin Wang ◽  
Xiao Yan Guan ◽  
Xin Yan Zhang
Keyword(s):  
Solid Oxide Fuel Cells ◽  
Electrochemical Impedance ◽  
Composite Cathode ◽  
Solid Oxide ◽  
Electrode Polarization ◽  
Impedance Spectra ◽  
Electrochemical Impedance Spectra ◽  
Composite Cathodes ◽  
Reduced Temperature ◽  
Resistance Value

°Abstract. In order to develop new cathodes for reduced temperature SOFCs, Ba0.5Sr0.5Co0.8Fe0.2O3-δ-Ag composite cathode was investigated in intermediate-temperature Solid Oxide Fuel Cells (IT-SOFCs). The XRD results suggested that no chemical reactions between BSCF and Ag in the composite cathode were found. The resistance measurements showed that the addition of Ag into BSCF improved electrical conductivity of pure BSCF, and the improved conductivity resulted in attractive cathode performance. In addition, electrochemical impedance spectra exhibited the better performance of BSCF-Ag composite cathodes than pure BSCF, e.g., the polarization resistance value of BSCF-Ag was only 0.36Ω cm2 at 650°C, which was nearly 80% lower than that of BSCF electrode. Polarization curves showed the overpotential decreased with the addition of Ag. The current density value of BSCF-Ag was 0.88Acm-2 under –120mV, about five times of that BSCF measured at 650°C. As a summary, compared to a pure BSCF cathode, it was found that adding Ag in the cathode enhanced the BSCF performance significantly.

scholarly journals Correction to: Electrochemical Impedance Spectroscopy Characterization of Silicon-Based Electrodes for Li-Ion Batteries

2020 ◽  
Vol 11 (3) ◽  
pp. 364-364
Author(s):  
Maciej Ratynski ◽  
Bartosz Hamankiewicz ◽  
Michał Krajewski ◽  
Maciej Boczar ◽  
Dominika A. Buchberger ◽  
...  
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Electrochemical Impedance ◽  
Li Ion Batteries ◽  
Li Ion ◽  
Silicon Based

Interaction between Sodium Molybdate and FSWed Wled of 5083 Effected by Time

2013 ◽  
Vol 699 ◽  
pp. 645-649
Author(s):  
Chang Bin Shen
Keyword(s):  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Corrosion ◽  
Sodium Molybdate ◽  
Impedance Spectra ◽  
Electrochemical Impedance Spectra ◽  
Friction Stir ◽  
Base Materials ◽  
Corrosion Behaviors ◽  
5083 Aluminum Alloy

Similar welds composed of 5083 were produced by friction stir welding. In the solution of 0.2 M NaHSO3 and 0.6 M NaCl, with the addition of a given concentration sodium molybdate as the inhibitor, the electrochemical corrosion behaviors of the friction stir welds (FSW) and 5083 were comparatively investigated by potentiodynamic polarization curve tests and electrochemical impedance spectra (EIS) at the ambient temperature for different test periods. The results indicated that : with the extension of period, the inhibition efficiencies (IE) for both the weld and 5083 base materials enhanced, at the same period, the inhibition efficiency (IE) for the weld was beyond that for 5083 base materials, sodium molybdate may be thought of as an effective inhibitor for 5083 aluminum alloy, the interaction between inhibitor and weld is stronger than that between inhibitor and base materials.

An analysis of drifts and nonlinearities in electrochemical impedance spectra

2011 ◽  
Vol 56 (22) ◽  
pp. 7467-7475 ◽  
Author(s):  
Niket S. Kaisare ◽  
Vimala Ramani ◽  
Karthik Pushpavanam ◽  
S. Ramanathan
Keyword(s):  
Electrochemical Impedance ◽  
Impedance Spectra ◽  
Electrochemical Impedance Spectra
Sign in / Sign up

Export Citation Format

Share Document