In Situ Two-Phase Flow Investigation of Proton Exchange Membrane (PEM) Electrolyzer by Simultaneous Optical and Neutron Imaging

2019 ◽  
Vol 41 (1) ◽  
pp. 349-362 ◽  
Author(s):  
Omer F. Selamet ◽  
Ugur Pasaogullari ◽  
Dusan Spernjak ◽  
Daniel S. Hussey ◽  
David L. Jacobson ◽  
...  
Keyword(s):  
Proton Exchange Membrane ◽  
Two Phase Flow ◽  
Proton Exchange ◽  
Neutron Imaging ◽  
Phase Flow ◽  
Two Phase ◽  
Flow Investigation ◽  
Pem Electrolyzer ◽  
Exchange Membrane

Ex-Situ Characterization of Two-Phase Flow Regimes in Proton-Exchange Membrane Fuel Cells Under Non-Isothermal Conditions

2010 ◽  
Author(s):  
Arganthae¨l Berson ◽  
Jon G. Pharoah
Keyword(s):  
Proton Exchange Membrane ◽  
Two Phase Flow ◽  
Metal Foam ◽  
Flow Regimes ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Ex Situ ◽  
Phase Flow ◽  
Two Phase ◽  
Exchange Membrane

Efficient water management is crucial for the good performances of proton-exchange membrane fuel cells (PEMFCs). The geometric and physical characteristics of the components of a PEMFC as well as operating conditions have an impact on the transport of water through the porous transport layer (PTL) and the two-phase flow regimes in the microchannels. One parameter of importance is the local temperature, which affects properties such as surface tension and is coupled with phase change. Indeed, a temperature difference of about 5K is expected across the PTL, with spatial variations due to the geometry of the flow field plate. We present preliminary results obtained with a first experimental setup for the ex-situ characterization of two-phase flow regimes in the flow channels. Water is pushed through the PTL, which is sandwiched between a porous metal foam and the flow field plate. The air flow rate, temperature and humidity can be controlled. The cell can be heated up by applying an electrical current through the metal foam. A transparent window is located on top of the flow channel. The two-phase flow within the micro-channels is visualized using a high-speed camera and laser-induced fluorescence. Preliminary results obtained under isothermal conditions at room temperature show that different two-phase flow regimes occur in the channels depending on the operating conditions, in good qualitative agreement with data from the literature. Eventually, a new visualization cell is presented that is expected to correct the flaws of the previous design and will allow a better thermal control. It will be possible to adjust the temperature gradient and the mean temperature in order to observe their impact on two-phase flow regimes for different types of PTL and flow rates. The results will provide a better understanding of water transport in PEMFC and benchmark data for the validation of numerical models.

Sign in / Sign up

Export Citation Format

Share Document