Role of Electro-Deposition Parameters on Preparing Tailored Dimension Vertically-Aligned ZnO Nanowires

2011 ◽  
Vol 158 (5) ◽  
pp. D282 ◽  
Author(s):  
Bin Bin Li ◽  
Usha Philipose ◽  
Christina F. de Souza ◽  
Harry E. Ruda
2009 ◽  
Vol 289-292 ◽  
pp. 293-300
Author(s):  
L. Sánchez ◽  
F.J. Bolívar ◽  
M.P. Hierro ◽  
F.J. Pérez

In this work, iron aluminide coatings were developed by Chemical Vapor Deposition in Fluidized Bed Reactor (CVD-FBR) on ferritic-martensitic steels. Small additions of zirconium powder were introduced in the fluidized bed; as a consequence, the obtained coatings are thicker than that without zirconium additions. When Zr powders are added in the fluidized bed, the deposition atmosphere drastically changes, leading to increase the deposition rate. Thermodynamic calculations were carried out to simulate the modifications in the CVD atmosphere in the Al/Zr deposition system in comparison to the single aluminization. In order to optimize the conditions of the deposition, parameters such as temperature and concentration of zirconium introduced into the bed were evaluated and compared with the results obtained for the single aluminum deposition.


1985 ◽  
Vol 56 ◽  
Author(s):  
F.-C. Su ◽  
S. Levine ◽  
P. E. Vanier ◽  
F. J. Kampas

AbstractAmorphous semiconductor superlattice structures consisting of alternating n-type and p-type doped layers of hydrogenated amorphous silicon (a-Si:H) have been made by silane glow discharge in a single chamber system. These multilayered films show the novel phenomenon of light-induced excess conductivity (LEC) associated with a metastable state having a lifetime of order of days. This report shows that the LEC effect is quite dependent on the specific details of the deposition parameters, namely dilution of the silane with inert gas, substrate temperature and layer thickness. In order to investigate the origin of the LEC effect, argon dilution was used for specific regions of the structure. This experiment shows that the slow states are distributed throughout the layers, and are not concentrated at the interfaces.


2016 ◽  
Vol 19 (2) ◽  
Author(s):  
MARCELLO CABIBBO ◽  
DANIELE CICCARELLI

ZnO nanowires are currently used in many application fields. Thermal stability is often a concern in terms of the mechanical response and, in particular, for the elasticity of the nanowires. Literature works focused, to a certain degree, on the nanowires heating response. Anyhow, no experimental data are nowadays available in literature on the low- and very low-temperature exposures. In the present study, deep-cryogenic treatment was performed on vertically aligned ZnO nanowires produced by metal organic chemical vapor deposition. The critical buckling stress and strain of individual nanowires was not significantly influenced by the cryogenic exposure, while the bulk ZnO halved.


2018 ◽  
Vol 5 (6) ◽  
pp. 065604 ◽  
Author(s):  
Honglei Zhou ◽  
Ping Liu ◽  
Xiaohong Chen ◽  
Wei Li ◽  
Xinkuan Liu

2021 ◽  
Vol 121 ◽  
pp. 111632
Author(s):  
Le Thanh Cong ◽  
Nguyen Thi Ngoc Lam ◽  
Doan Van Thuong ◽  
Ngo Ngoc Ha ◽  
Nguyen Duc Dung ◽  
...  

2020 ◽  
Vol 3 (5) ◽  
pp. 4305-4313
Author(s):  
Vefa Sahibbeyli ◽  
Dilara B. Yildiz ◽  
Gözde Papir ◽  
Yavuz Dede ◽  
Gokhan Demirel

2010 ◽  
Vol 114 (41) ◽  
pp. 17889-17893 ◽  
Author(s):  
Rui Chen ◽  
Yeeyan Tay ◽  
Jun Ye ◽  
Yang Zhao ◽  
Guozhong Xing ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document