Bamboo-carbon as a novel carbon-support/electrocatalyst of air cathodes

2019 ◽  
Vol 3 (42) ◽  
pp. 51-65 ◽  
Author(s):  
Chi-Jui Lan ◽  
Yuean-Fa Chi ◽  
Tsung-Shune Chin
Keyword(s):  
Carbon Support ◽  
Bamboo Carbon

Structural similarity of ribosomes from E. coli and A. salina

1978 ◽  
Vol 36 (2) ◽  
pp. 242-243
Author(s):  
M. Boublik ◽  
R.M. Wydro ◽  
W. Hellmann ◽  
F. Jenkins
Keyword(s):  
Ribosomal Proteins ◽  
Direct Evidence ◽  
Structural Similarity ◽  
Carbon Support ◽  
Artemia Salina ◽  
Uranyl Acetate ◽  
Biological Assays ◽  
E Coli ◽  
And Function ◽  
Fine Carbon

Ribosomes are ribonucleoprotein particles necessary for processing the genetic information of mRNA into proteins. Analogy in composition and function of ribosomes from diverse species, established by biochemical and biological assays, implies their structural similarity. Direct evidence obtained by electron microscopy seems to be of increasing relevance in understanding the structure of ribosomes and the mechanism of their role in protein synthesis.The extent of the structural homology between prokaryotic and eukaryotic ribosomes has been studied on ribosomes of Escherichia coli (E.c.) and Artemia salina (A.s.). Despite the established differences in size and in the amount and proportion of ribosomal proteins and RNAs both types of ribosomes show an overall similarity. The monosomes (stained with 0.5% aqueous uranyl acetate and deposited on a fine carbon support) appear in the electron micrographs as round particles with a diameter of approximately 225Å for the 70S E.c. (Fig. 1) and 260Å for the 80S A.s. monosome (Fig. 2).

Radiation Damage of Support Films

1981 ◽  
Vol 39 ◽  
pp. 28-29
Author(s):  
H.A. Cohen ◽  
W. Chiu
Keyword(s):  
Transfer Function ◽  
Low Temperatures ◽  
Carbon Support ◽  
Contrast Transfer Function ◽  
Electron Dose ◽  
Imaging Parameters ◽  
Negative Stain ◽  
Phase Corrections ◽  
Two Parameters ◽  
Medium Dose

The goal of imaging the finest detail possible in biological specimens leads to contradictory requirements for the choice of an electron dose. The dose should be as low as possible to minimize object damage, yet as high as possible to optimize image statistics. For specimens that are protected by low temperatures or for which the low resolution associated with negative stain is acceptable, the first condition may be partially relaxed, allowing the use of (for example) 6 to 10 e/Å2. However, this medium dose is marginal for obtaining the contrast transfer function (CTF) of the microscope, which is necessary to allow phase corrections to the image. We have explored two parameters that affect the CTF under medium dose conditions.Figure 1 displays the CTF for carbon (C, row 1) and triafol plus carbon (T+C, row 2). For any column, the images to which the CTF correspond were from a carbon covered hole (C) and the adjacent triafol plus carbon support film (T+C), both recorded on the same micrograph; therefore the imaging parameters of defocus, illumination angle, and electron statistics were identical.

Experiments in Bright-Field Imaging with Hollow-Cone Illumination

1981 ◽  
Vol 39 ◽  
pp. 226-227
Author(s):  
W. Kunath ◽  
K. Weiss ◽  
E. Zeitler
Keyword(s):  
Signal To Noise Ratio ◽  
Carbon Support ◽  
Electronic System ◽  
Optic Axis ◽  
Hollow Cone ◽  
Signal To Noise ◽  
Bright Field ◽  
Noise Ratio ◽  
Single Field ◽  
Field Imaging

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.

scholarly journals Development of palladium catalysts modified by ruthenium and molybdenum as anode in direct ethanol fuel cell

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Yonis Fornazier Filho ◽  
Ana Caroliny Carvalho da Cruz ◽  
Rolando Pedicini ◽  
José Ricardo Cezar Salgado ◽  
Priscilla Paiva Luz ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Palladium Catalysts ◽  
Carbon Support ◽  
X Ray Diffraction ◽  
Direct Ethanol Fuel Cell ◽  
Pd Catalysts ◽  
Bifunctional Mechanism ◽  
Catalytic Activities ◽  
Intrinsic Mechanism ◽  
Ternary Catalysts

AbstractPhysical and electrochemical properties of Pd catalysts combined with Ru and Mo on carbon support were investigated. To this end, Pd, Pd1.3Ru1.0, Pd3.2Ru1.3Mo1.0 and Pd1.5Ru0.8Mo1.0 were synthesized on Carbon Vulcan XC72 support by the method of thermal decomposition of polymeric precursors and then physically and electrochemically characterized. The highest reaction yields are obtained for Pd3.2Ru1.3Mo1.0/C and Pd1.5Ru0.8Mo1.0/C and, as demonstrated by thermal analysis, they also show the smallest metal/carbon ratio compared the other catalysts. XRD (X-ray Diffraction) and Raman analyses show the presence of PdO and RuO2 for the Pd/C and the Pd1.3Ru1.0/C catalysts, respectively, a fact not observed for the Pd3.2Ru1.3 Mo1.0 /C and the Pd1.5Ru0.8Mo1.0/C catalysts. The catalytic activities were tested for the ethanol oxidation in alkaline medium. Cyclic voltammetry (CV) shows Pd1.3Ru1.0/C exhibiting the highest peak of current density, followed by Pd3.2Ru1.3Mo1.0/C, Pd1.5Ru0.8Mo1.0/C and Pd/C. From, chronoamperometry (CA), it is possible to observe the lowest rate of poisoning for the Pd1.3Ru1.0/C, followed by Pd3.2Ru1.3Mo1.0/C, Pd1.5Ru0.8Mo1.0/C and Pd/C. These results suggested that catalytic activity of the binary and the ternary catalysts are improved in comparison with Pd/C. The presence of RuO2 activated the bifunctional mechanism and improved the catalytic activity in the Pd1.3Ru1.0/C catalyst. The addition of Mo in the catalysts enhanced the catalytic activity by the intrinsic mechanism, suggesting a synergistic effect between metals. In summary, we suggest that it is possible to synthesize ternary PdRuMo catalysts supported on Carbon Vulcan XC72, resulting in materials with lower poisoning rates and lower costs than Pd/C. Graphic abstract

scholarly journals Towards High Efficacy of Pd-Au/C Catalyst for Tetrachloromethane Hydrodechlorination

Chemistry ◽  
2021 ◽  
Vol 3 (1) ◽  
pp. 338-359
Author(s):  
Magdalena Bonarowska ◽  
Zbigniew Kaszkur ◽  
Krzysztof Matus ◽  
Alicja Drelinkiewicz ◽  
Tomasz Szumełda ◽  
...  
Keyword(s):  
Microwave Irradiation ◽  
Gas Phase ◽  
Thermal Activation ◽  
Supported Catalysts ◽  
Carbon Support ◽  
Thermal Reduction ◽  
Microwave Oven ◽  
Optimal Conditions ◽  
Catalyst Activation ◽  
Critical Part

We present an efficient strategy for synthesising the PdAu catalysts with a homogeneous PdAu alloy phase for environmentally important hydrodechlorination of tetrachloromethane in the gas phase. The synthesis of carbon-supported catalysts involved two major steps: (i) incorporation of palladium and gold nanoparticles into carbon support and (ii) activation of the catalysts. The critical part of this work was to find the optimal conditions for both steps. Thus, the incorporation of the nanoparticles was carried out in two ways, by impregnation and direct redox reaction method using acetone solutions of metal precursor salts. The activation was performed either by a conventional thermal reduction in hydrogen or flash irradiation in a microwave oven. The homogeneity and structure of the PdAu alloy were found to depend on the catalyst activation method critically. In all cases, we observed better homogeneity for catalysts that were subject to microwave irradiation. Moreover, the flash microwave irradiation of prepared catalysts provided catalysts of better stability and selectivity towards the desired products (hydrocarbons) in the hydrodechlorination of tetrachloromethane as compared to the catalyst obtained by conventional thermal activation in hydrogen.

scholarly journals Non-Isothermal Decomposition as Efficient and Simple Synthesis Method of NiO/C Nanoparticles for Asymmetric Supercapacitors

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 187
Author(s):  
Daria Chernysheva ◽  
Ludmila Pudova ◽  
Yuri Popov ◽  
Nina Smirnova ◽  
Olga Maslova ◽  
...  
Keyword(s):  
Nickel Oxide ◽  
Synthesis Method ◽  
Average Diameter ◽  
Carbon Support ◽  
Spherical Particles ◽  
Support Surface ◽  
Isothermal Decomposition ◽  
Step Method ◽  
Nickel Oxide Nanoparticles ◽  
Electrode Cell

A series of NiO/C nanocomposites with NiO concentrations ranging from 10 to 90 wt% was synthesized using a simple and efficient two-step method based on non-isothermal decomposition of Nickel(II) bis(acetylacetonate). X-ray diffraction (XRD) measurements of these NiO/C nanocomposites demonstrate the presence of β-NiO. NiO/C nanocomposites are composed of spherical particles distributed over the carbon support surface. The average diameter of nickel oxide spheres increases with the NiO content and are estimated as 36, 50 and 205 nm for nanocomposites with 10, 50 and 80 wt% NiO concentrations, respectively. In turn, each NiO sphere contains several nickel oxide nanoparticles, whose average sizes are 7–8 nm. According to the tests performed using a three-electrode cell, specific capacitance (SC) of NiO/C nanocomposites increases from 200 to 400 F/g as the NiO content achieves a maximum of 60 wt% concentration, after which the SC decreases. The study of the NiO/C composite showing the highest SC in three- and two-electrode cells reveals that its SC remains almost unchanged while increasing the current density, and the sample demonstrates excellent cycling stability properties. Finally, NiO/C (60% NiO) composites are shown to be promising materials for charging quartz clocks with a power rating of 1.5 V (30 min).

Development of high stable Pt-based ORR catalyst over Mn-modified polyaniline-based carbon nanofiber

2021 ◽  
Author(s):  
Hong Zhu ◽  
Qingjun Chen ◽  
Jinghua Yu ◽  
Qian Zhou ◽  
Fanghui Wang ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Oxygen Reduction Reaction ◽  
Oxygen Reduction ◽  
Proton Exchange Membrane ◽  
Carbon Nanofiber ◽  
Carbon Support ◽  
Reduction Reaction ◽  
Proton Exchange ◽  
Key Factors ◽  
Exchange Membrane

The corrosion of carbon support is one of key factors causing deactivation of Pt-based oxygen reduction reaction (ORR) catalysts for proton exchange membrane fuel cells. In this work, a highly...

Novel Carbon Structure as Highly Stable Support for Electro-catalyst in Acid Media: Regulating Oxygen Functionalization Behavior of Carbon

2021 ◽  
Author(s):  
Guokang Han ◽  
Yongrong Sun ◽  
Yuxin Liu ◽  
Lingfeng Li ◽  
Xudong Li ◽  
...  
Keyword(s):  
Precious Metal ◽  
Catalytic Properties ◽  
Supported Catalysts ◽  
Carbon Support ◽  
Carbon Structure ◽  
Acid Media

The nature of carbon support has huge effects on the catalytic properties of supported catalysts. When utilized for electrochemical purposes as support for precious metal in acid media, the oxygen...

Compressive Strain Modulation of Single Iron Sites on Helical Carbon Support Boosts Electrocatalytic Oxygen Reduction

2021 ◽  
Vol 133 (42) ◽  
pp. 22904-22910
Author(s):  
Jia Yang ◽  
Zhiyuan Wang ◽  
Chun‐Xiang Huang ◽  
Yida Zhang ◽  
Qinghua Zhang ◽  
...  
Keyword(s):  
Oxygen Reduction ◽  
Compressive Strain ◽  
Carbon Support ◽  
Electrocatalytic Oxygen Reduction ◽  
Strain Modulation
Sign in / Sign up

Export Citation Format

Share Document