Effect of Heat Treatment on Grain Boundary Nanostructure and Corrosion of Low Copper AlMgSi Alloy

2019 ◽  
Vol 3 (31) ◽  
pp. 167-172 ◽  
Author(s):  
Magnus Hurlen Larsen ◽  
John C. Walmsley ◽  
Otto Lunder ◽  
Kemal Nisancioglu
Keyword(s):  
Heat Treatment ◽  
Grain Boundary ◽  
Almgsi Alloy

Strain-induced martensite effects on transgranular carbide precipitation in type 304 stainless steels

1991 ◽  
Vol 49 ◽  
pp. 604-605
Author(s):  
A.H. Advani ◽  
L.E. Murr ◽  
D. Matlock
Keyword(s):  
Heat Treatment ◽  
Grain Boundary ◽  
Stress Corrosion Cracking ◽  
Stainless Steels ◽  
Deformation Twin ◽  
Austenitic Stainless Steels ◽  
Carbide Precipitation ◽  
Strain Induced Martensite ◽  
Type 304

Thermomechanically induced strain is a key variable producing accelerated carbide precipitation, sensitization and stress corrosion cracking in austenitic stainless steels (SS). Recent work has indicated that higher levels of strain (above 20%) also produce transgranular (TG) carbide precipitation and corrosion simultaneous with the grain boundary phenomenon in 316 SS. Transgranular precipitates were noted to form primarily on deformation twin-fault planes and their intersections in 316 SS.Briant has indicated that TG precipitation in 316 SS is significantly different from 304 SS due to the formation of strain-induced martensite on 304 SS, though an understanding of the role of martensite on the process has not been developed. This study is concerned with evaluating the effects of strain and strain-induced martensite on TG carbide precipitation in 304 SS. The study was performed on samples of a 0.051%C-304 SS deformed to 33% followed by heat treatment at 670°C for 1 h.

Effect of Post Weld Heat Treatment on Fusion and Heat Affected Zone Microstructure and Mechanical Properties of Inconel X-750 Welds

2011 ◽  
Vol 214 ◽  
pp. 108-112 ◽  
Author(s):  
Prachya Peasura ◽  
Bovornchok Poopat
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Grain Size ◽  
Grain Boundary ◽  
Weld Metal ◽  
Heat Affected Zone ◽  
Aging Temperature ◽  
Post Weld Heat Treatment ◽  
High Aging Temperature ◽  
Zone Microstructure

The Inconel X-750 indicates good hot corrosion resistance, high stability and strength at high temperatures and for this reason the alloy is used in manufacturing of gas turbine hot components. The objective of this research was study the effect of post weld heat treatment (PWHT) on fusion zone and heat affected zone microstructure and mechanical properties of Inconel X-750 weld. After welding, samples were solutionized at 1500 0C. Various aging temperature and times were studied. The results show that aging temperature and time during PWHT can greatly affect microstructure and hardness in fusion zone and heat affected zone. As high aging temperature was used, the grain size also increased and M23C6 at the grain boundary decreased. This can result in decreased of hardness. Moreover excessive aging temperature can result in increasing MC carbide intensity in parent phase (austenite). It can also be observed that M23C6 at the grain boundary decreased due to high aging temperature. This resulted in decreasing of hardness of weld metal and heat affected zone. Experimental results showed that the aging temperature 705 0C aging time of 24 hours provided smaller grain size, suitable size and intensity of MC carbide resulting in higher hardness both in weld metal and HAZ.

Effect of Heat-Treatment Time on Microstructure and Mechanical Properties of Mg-5Gd-2Y-2Zn-0.5Zr Alloy

2012 ◽  
Vol 482-484 ◽  
pp. 1384-1389 ◽  
Author(s):  
Ling Gang Meng ◽  
Can Feng Fang ◽  
Peng Peng ◽  
Nai Pu Li ◽  
Qiong Zhu ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Grain Boundary ◽  
Treatment Time ◽  
Time Range ◽  
Lpso Phase ◽  
High Temperature Heat Treatment ◽  
Lpso Structure ◽  
The Matrix ◽  
New Type ◽  
The Stability

Microstructure evolution of Mg-5Gd-2Y-2Zn-0.5Zr alloy during high temperature heat-treatment at 500°C in the time range 10-70h was investigated. The results show that after adding the element Y, the as-cast Mg-5Gd-2Y-2Zn-0.5Zr alloy forms the Mg12Zn(Y,Gd) phase with 18R-LPSO structure at the grain boundary. During heat-treatment at 500°C, the stability of 18R-LPSO structure is weakened by Gd atoms, parts of LPSO phases dissolve gradually into the matrix with time prolonged and a new type Mg(Y,Gd)Zn phase come into being. LPSO phase in the grain boundary can ensure the ultimate tensile strength and elongation of the alloy, and effect of dissevering on the LPSO phase by Mg(Gd,Y)Zn phase results the decrease of UTS and elongation.

Microstructural Studies of High Coercivity Nd15Fe77B8 Sintered Magnets

1987 ◽  
Vol 96 ◽  
Author(s):  
M. H. Ghandehari ◽  
J. Fidler
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Transmission Electron Microscopy ◽  
Grain Boundary ◽  
Electron Microprobe ◽  
Boundary Phase ◽  
High Coercivity ◽  
Transmission Electron ◽  
Microstructural Studies ◽  
Domain Reversal

ABSTRACTMicrostructures of Nd15−xDyxFe77B8 prepared by alloying with Dy, and by using Dy2O3 as a sinl'ken adidive, have been determined using electron microprobe and transmission electron microscopy. The results have shown a higher Dy concentration near the grain boundaries of the 2–14–1 phase for magnets doped with Dy2O 3, as compared to the Dy-alloyed magnets. A two-step post sintering heat treatment was also studied for the two systems. The resultant concentration gradient of Dy in the 2–14–1 phase of the oxide-doped magnets is explained by the reaction of Dy2O3 with the Nd-rich grain boundary phase and its slow diffusion into thg 4–14–1 phase. Increased Dy concentration near the grain boundary is more effective in improving the coercivity, as domain reversal nucleation originates at or near this region.

scholarly journals Eliminating continuous grain boundary α phase in laser melting deposited near β titanium alloys by heat treatment

2019 ◽  
Vol 563 ◽  
pp. 022025
Author(s):  
Penglin Li ◽  
Changmeng Liu ◽  
Jie Wang ◽  
Jiping Lu ◽  
Shuyuan Ma ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Grain Boundary ◽  
Titanium Alloys ◽  
Laser Melting ◽  
Α Phase

Atomic Scale Characterisation of Electrodeposited Nanocrystalline Ni-P Alloys

1999 ◽  
Vol 581 ◽  
Author(s):  
Matthias Abraham ◽  
Mattias Thuvandert ◽  
Helen M. Lane ◽  
Alfred Cerezo ◽  
George D.W. Smith
Keyword(s):  
Heat Treatment ◽  
Grain Boundary ◽  
Grain Boundaries ◽  
Three Dimensional ◽  
Boundary Segregation ◽  
Atom Probe ◽  
Atomic Scale ◽  
Grain Boundary Segregation ◽  
P Concentration

ABSTRACTNanocrystalline Ni-P alloys produced by electrodeposition have been characterised by three-dimensional atom probe (3DAP) analysis. In the as-deposited materials, there are indications of some variation in P concentration between grains and segregation to grain boundaries. After heat treatment however, strong grain boundary segregation and the formation of Ni3P precipitates have been observed.

Sign in / Sign up

Export Citation Format

Share Document