Modeling Electrochemical Impedance Spectra in SOFC Button Cells with Internal Methane Reforming

2006 ◽  
Vol 153 (9) ◽  
pp. A1765 ◽  
Author(s):  
Huayang Zhu ◽  
Robert J. Kee
Keyword(s):  
Electrochemical Impedance ◽  
Methane Reforming ◽  
Impedance Spectra ◽  
Electrochemical Impedance Spectra

Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-δ-Ag Composite Cathode Materials for IT-SOFCs

2011 ◽  
Vol 311-313 ◽  
pp. 2309-2314 ◽  
Author(s):  
Wen Xia Zhu ◽  
Zhe Lü ◽  
Le Xin Wang ◽  
Xiao Yan Guan ◽  
Xin Yan Zhang
Keyword(s):  
Solid Oxide Fuel Cells ◽  
Electrochemical Impedance ◽  
Composite Cathode ◽  
Solid Oxide ◽  
Electrode Polarization ◽  
Impedance Spectra ◽  
Electrochemical Impedance Spectra ◽  
Composite Cathodes ◽  
Reduced Temperature ◽  
Resistance Value

°Abstract. In order to develop new cathodes for reduced temperature SOFCs, Ba0.5Sr0.5Co0.8Fe0.2O3-δ-Ag composite cathode was investigated in intermediate-temperature Solid Oxide Fuel Cells (IT-SOFCs). The XRD results suggested that no chemical reactions between BSCF and Ag in the composite cathode were found. The resistance measurements showed that the addition of Ag into BSCF improved electrical conductivity of pure BSCF, and the improved conductivity resulted in attractive cathode performance. In addition, electrochemical impedance spectra exhibited the better performance of BSCF-Ag composite cathodes than pure BSCF, e.g., the polarization resistance value of BSCF-Ag was only 0.36Ω cm2 at 650°C, which was nearly 80% lower than that of BSCF electrode. Polarization curves showed the overpotential decreased with the addition of Ag. The current density value of BSCF-Ag was 0.88Acm-2 under –120mV, about five times of that BSCF measured at 650°C. As a summary, compared to a pure BSCF cathode, it was found that adding Ag in the cathode enhanced the BSCF performance significantly.

Interaction between Sodium Molybdate and FSWed Wled of 5083 Effected by Time

2013 ◽  
Vol 699 ◽  
pp. 645-649
Author(s):  
Chang Bin Shen
Keyword(s):  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Corrosion ◽  
Sodium Molybdate ◽  
Impedance Spectra ◽  
Electrochemical Impedance Spectra ◽  
Friction Stir ◽  
Base Materials ◽  
Corrosion Behaviors ◽  
5083 Aluminum Alloy

Similar welds composed of 5083 were produced by friction stir welding. In the solution of 0.2 M NaHSO3 and 0.6 M NaCl, with the addition of a given concentration sodium molybdate as the inhibitor, the electrochemical corrosion behaviors of the friction stir welds (FSW) and 5083 were comparatively investigated by potentiodynamic polarization curve tests and electrochemical impedance spectra (EIS) at the ambient temperature for different test periods. The results indicated that : with the extension of period, the inhibition efficiencies (IE) for both the weld and 5083 base materials enhanced, at the same period, the inhibition efficiency (IE) for the weld was beyond that for 5083 base materials, sodium molybdate may be thought of as an effective inhibitor for 5083 aluminum alloy, the interaction between inhibitor and weld is stronger than that between inhibitor and base materials.

An analysis of drifts and nonlinearities in electrochemical impedance spectra

2011 ◽  
Vol 56 (22) ◽  
pp. 7467-7475 ◽  
Author(s):  
Niket S. Kaisare ◽  
Vimala Ramani ◽  
Karthik Pushpavanam ◽  
S. Ramanathan
Keyword(s):  
Electrochemical Impedance ◽  
Impedance Spectra ◽  
Electrochemical Impedance Spectra

One-Pot Electrodeposition of NiS Nanoparticles as an Efficient Electrode for Nonenzymatic H2O2 and Glucose Sensors

NANO ◽  
2019 ◽  
Vol 14 (01) ◽  
pp. 1950010
Author(s):  
Zhiheng Huang ◽  
Chunchuan Gu ◽  
Jiajun Wen ◽  
Langlang Zhu ◽  
Mingzhen Zhang ◽  
...  
Keyword(s):  
Metal Ion ◽  
Electrochemical Impedance ◽  
Glucose Sensors ◽  
Cyclic Voltammograms ◽  
Impedance Spectra ◽  
Electrochemical Impedance Spectra ◽  
One Pot ◽  
X Ray ◽  
First Time ◽  
Nis Nanoparticles

In this paper, a new and one-pot electrodeposition method was expanded for the preparation of NiS nanoparticles-based electrochemical biosensor using metal-ion complexes as a precursor. Thioacetamide was used to control the production rate of NiS nanoparticles for the first time. The proposed electrochemical sensor was characterized by energy dispersive X-ray spectroscopy (EDX), field emission scanning electron microscope (FESEM), cyclic voltammograms (CV), and electrochemical impedance spectra (EIS). Experiment parameters were optimized. Under the optimized condition, the prepared NiS-based biosensor exhibited excellent electrocatalytic oxidation of H2O2 and glucose due to their small size. It provided fast and sensitive strategy for detecting H2O2 and glucose in the range of 1–5000 and 1–1000[Formula: see text][Formula: see text]M. The detection limit of 0.257 and 0.3[Formula: see text][Formula: see text]M was obtained for H2O2 and glucose. The mechanisms were also analyzed. The proposed biosensor exhibited excellent anti-interference and repeatability. Furthermore, it was applied in the actual sample analysis, such as human blood serum.

Sign in / Sign up

Export Citation Format

Share Document