Understanding the Effect of MgO Interfacial Layer on ZnO/High-K/FTO Transparent Thin Film Transistors for Large-Area Transparent Electronics Applications

2015 ◽  
Vol 66 (41) ◽  
pp. 15-22
Author(s):  
P. Thapaliya ◽  
R. Jha
2011 ◽  
Vol 1315 ◽  
Author(s):  
D. K. Ngwashi ◽  
R. B. M. Cross ◽  
S. Paul ◽  
Andrian P. Milanov ◽  
Anjana Devi

ABSTRACTIn order to investigate the performance of ZnO-based thin film transistors (ZnO-TFTs), we fabricate devices using amorphous hafnium dioxide (HfO2) high-k dielectrics. Sputtered ZnO was used as the active channel layer, and aluminium source/drain electrodes were deposited by thermal evaporation, and the HfO2 high-k dielectrics are deposited by metal-organic chemical vapour deposition (MOCVD). The ZnO-TFTs with high-k HfO2 gate insulators exhibit good performance metrics and effective channel mobility which is appreciably higher in comparison to SiO2-based ZnO TFTs fabricated under similar conditions. The average channel mobility, turn-on voltage, on-off current ratio and subthreshold swing of the high-k TFTs are 31.2 cm2V-1s-1, -4.7 V, ~103, and 2.4 V/dec respectively. We compared the characteristics of a typical device consisting of HfO2 to those of a device consisting of thermally grown SiO2 to examine their potential for use as high-k dielectrics in future TFT devices.


2016 ◽  
Vol 16 (4) ◽  
pp. 3659-3663
Author(s):  
H Yu ◽  
L Zhang ◽  
X. H Li ◽  
H. Y Xu ◽  
Y. C Liu

The amorphous indium-gallium-zinc oxide (a-IGZO) thin film transistors (TFTs) were demonstrated based on a double-layer channel structure, where the channel is composed of an ultrathin nitrogenated a-IGZO (a-IGZO:N) layer and an undoped a-IGZO layer. The double-layer channel device showed higher saturation mobility and lower threshold-voltage shift (5.74 cm2/Vs, 2.6 V) compared to its single-layer counterpart (0.17 cm2/Vs, 7.23 V). The improvement can be attributed to three aspects: (1) improved carrier transport properties of the channel by the a-IGZO:N layer with high carrier mobility and the a-IGZO layer with high carrier concentration, (2) reduced interfacial trap density between the active channel and the gate insulator, and (3) higher surface flatness of the double-layer channel. Our study reveals key insights into double-layer channel, involving selecting more suitable electrical property for back-channel layer and more suitable interface modification for active layer. Meanwhile, room temperature fabrication amorphous TFTs offer certain advantages on better flexibility and higher uniformity over a large area.


Sign in / Sign up

Export Citation Format

Share Document