Very high quality user interfaces and fast data filing using a PC

1990 ◽  
Vol 20 (4) ◽  
pp. 418-426 ◽  
Author(s):  
Jonny Österman
Keyword(s):  
User Interfaces ◽  
High Quality ◽  
Very High

Structural changes in silicon-on-insulator material during post-implantation annealing

1986 ◽  
Vol 44 ◽  
pp. 736-737
Author(s):  
C. O. Jung ◽  
S. J. Krause ◽  
S.R. Wilson
Keyword(s):  
Integrated Circuits ◽  
Oxide Layer ◽  
High Speed ◽  
Structural Changes ◽  
Device Fabrication ◽  
Silicon On Insulator ◽  
High Quality ◽  
Radiation Hardened ◽  
Post Implantation ◽  
Very High

Silicon-on-insulator (SOI) structures have excellent potential for future use in radiation hardened and high speed integrated circuits. For device fabrication in SOI material a high quality superficial Si layer above a buried oxide layer is required. Recently, Celler et al. reported that post-implantation annealing of oxygen implanted SOI at very high temperatures would eliminate virtually all defects and precipiates in the superficial Si layer. In this work we are reporting on the effect of three different post implantation annealing cycles on the structure of oxygen implanted SOI samples which were implanted under the same conditions.

Constructed reed beds: appropriate technology for small communities

1995 ◽  
Vol 32 (3) ◽  
pp. 339-348 ◽  
Author(s):  
M. B. Green ◽  
J. Upton
Keyword(s):  
Sewage Treatment ◽  
Appropriate Technology ◽  
Great Promise ◽  
High Quality ◽  
Reed Beds ◽  
Small Communities ◽  
Operational Information ◽  
Reed Bed ◽  
Small Sites ◽  
Very High

Reed bed treatment is put in the context of a major water company’s need to provide reliable, high quality, effluents from small sewage treatment works whilst seeking to minimise running costs. Design and operational information is given for reed bed applications in Severn Trent Water. Performance details are provided for application to secondary, tertiary and storm overflow treatment. The results give particular confidence in the system’s ability to deliver very high quality effluents when used for tertiary treatment, the company’s biggest application. Reed beds work well against less demanding criteria for secondary treatment at small sites and show great promise for storm overflow treatment.

scholarly journals Improving Accuracy in Studying the Interactions of Seismic Waves with Bottom Sediments

2021 ◽  
Vol 9 (2) ◽  
pp. 229
Author(s):  
Georgy Mitrofanov ◽  
Nikita Goreyavchev ◽  
Roman Kushnarev
Keyword(s):  
Bottom Sediments ◽  
Seismic Waves ◽  
Wide Frequency Range ◽  
Quality Of Data ◽  
High Quality ◽  
Relative Characteristic ◽  
Seabed Evolution ◽  
Marine Seismic ◽  
Very High

The emerging tasks of determining the features of bottom sediments, including the evolution of the seabed, require a significant improvement in the quality of data and methods for their processing. Marine seismic data has traditionally been perceived to be of high quality compared to land data. However, high quality is always a relative characteristic and is determined by the problem being solved. In a detailed study of complex processes, the interaction of waves with bottom sediments, as well as the processes of seabed evolution over short time intervals (not millions of years), we need very high accuracy of observations. If we also need significant volumes of research covering large areas, then a significant revision of questions about the quality of observations and methods of processing is required to improve the quality of data. The article provides an example of data obtained during high-precision marine surveys and containing a wide frequency range from hundreds of hertz to kilohertz. It is shown that these data, visually having a very high quality, have variations in wavelets at all analyzed frequencies. The corresponding variations reach tens of percent. The use of the method of factor decomposition in the spectral domain made it possible to significantly improve the quality of the data, reducing the variability of wavelets by several times.

scholarly journals R factors in Rietveld analysis: How good is good enough?

2006 ◽  
Vol 21 (1) ◽  
pp. 67-70 ◽  
Author(s):  
Brian H. Toby
Keyword(s):  
Rietveld Analysis ◽  
Poor Quality ◽  
Quality Data ◽  
High Quality ◽  
High Quality Data ◽  
Poor Quality Data ◽  
Error Index ◽  
R Factors ◽  
Very High

The definitions for important Rietveld error indices are defined and discussed. It is shown that while smaller error index values indicate a better fit of a model to the data, wrong models with poor quality data may exhibit smaller values error index values than some superb models with very high quality data.

scholarly journals Diffracted Light Contrast: Improving the Resolution of a Basic Light Microscope by an Order of Magnitude

2006 ◽  
Vol 14 (6) ◽  
pp. 10-15
Author(s):  
W. Barry Piekos
Keyword(s):  
Epithelial Cells ◽  
Light Microscope ◽  
Depth Of Field ◽  
High Quality ◽  
Surface Lattice ◽  
Buccal Epithelial Cells ◽  
Order Of Magnitude ◽  
Student Laboratory ◽  
Light Contrast ◽  
Very High

The discovery that the diffracted light from a convex edge can be used to form a very high-quality, shadowcast image on any light microscope has led to a device and method, diffracted-light contrast (DLC), which will allow shadowcast imaging to be routinely performed on student/laboratory microscopes (Piekos, 1999, 2003). The surface lattice of Surirella gema was easily resolved, and micrographs comparing the subcellular details of buccal epithelial cells viewed with DLC vs. Nomarski DIC showed that, on the microscopes used, DLC was superior in both the detail it rendered and depth of field. Although the images presented revealed DLC to be an excellent technique, the full capabilities of the technique were not known at the time.

scholarly journals EFFECT OF CALCIUM SULFOALUMINATE ADDITIVE ON LINEAR DEFORMATION AT DIFFERENT HUMIDITY AND STRENGTH OF CEMENT MORTARS

2020 ◽  
Author(s):  
Kadhim Abdulwahid Al-Musawi ◽  
Kottayil Bindhu Abraham ◽  
Tatsiana Potses ◽  
Sergey Leonovich ◽  
Natallia Kalinouskaya ◽  
...  
Keyword(s):  
Bending Strength ◽  
High Humidity ◽  
Test Results ◽  
High Quality ◽  
Linear Deformation ◽  
Calcium Sulfoaluminate ◽  
Environmental Humidity ◽  
Cement Mortars ◽  
Under Construction ◽  
Very High

The effect of calcium sulfoaluminate additives (CSA) on the compression and bending strength of mortar, as well as linear deformation of prism samples at different environmental humidity was studied. Test results indicate that bending strength of mortars with CSA and the referent at the age of 28 days are practically equal. Compressive strength of mortars with CSA reduced by 20 ... 23% for all dosages of CSA. Relative linear deformations depend on the humidity of the environment. At a humidity of 100%, the relative linear deformations are positive and the expansion increases with increasing dosage of the expanding additive. When hardening in dry air at a humidity of 55%, the greatest shrinkage deformations were for mortars with CSA. We can conclude that the expanding effect of CSA is fully manifested at high humidity, i.e. under construction conditions, this means very high-quality moisture care for concrete structures.

Post-Byzantine Figured Silks

1951 ◽  
Vol 46 ◽  
pp. 177-181
Author(s):  
D. Talbot Rice
Keyword(s):  
Sixteenth Century ◽  
Sudden Stop ◽  
High Quality ◽  
The Balkans ◽  
Byzantine Art ◽  
Christian Art ◽  
Middle Period ◽  
Metal Work ◽  
Private Collections ◽  
Very High

At one time it was generally assumed, even by distinguished Byzantinists, that the Turkish conquest of Constantinople in 1453 put a sudden stop to the production of all objects of quality in the East Christian world, and that after that date Byzantine art at once degenerated into a peasant art throughout the whole of the area touched by the Turks. Recent research has, however, led to some modification of this view, and though work of the same superb quality as that produced in the great middle period of Byzantine art was not executed, we now know that in addition to painted icons, such things as embroideries, carved reliquaries, crosses of chased metal work or champlevé enamel and objects in bone or even ivory, were produced, which were by no means negligible from the artistic standpoint. Their production continued, moreover, through the sixteenth and earlier seventeenth centuries; only after that date did Christian art in Greece and the Balkans assume an essentially ‘peasant’ character. It is indeed to the sixteenth century that the greater number of painted icons that are now to be found in museums and private collections in Greece are to be assigned, and though there was much hack-work, paintings of very high quality were also produced amongst them.

Sign in / Sign up

Export Citation Format

Share Document