WiPhone

Author(s):  
Jinyi Liu ◽  
Youwei Zeng ◽  
Tao Gu ◽  
Leye Wang ◽  
Daqing Zhang

Recent years have witnessed a trend of monitoring human respiration using Channel State Information (CSI) retrieved from commodity WiFi devices. Existing approaches essentially leverage signal propagation in a Line-of-Sight (LoS) setting to achieve good performance. However, in real-life environments, LoS can be easily blocked by furniture, home appliances and walls. This paper presents a novel smartphone-based system named WiPhone, aiming to robustly monitor human respiration in NLoS settings. Since a smartphone is usually carried around by one subject, leveraging directly-reflected CSI signals in LoS becomes infeasible. WiPhone exploits ambient reflected CSI signals in a Non-Line-of-Sight (NLoS) setting to quantify the relationship between CSI signals reflected from the environment and a subject's chest displacement. In this way, WiPhone successfully turns ambient reflected signals which have been previously considered "destructive" into beneficial sensing capability. CSI signals obtained from smartphone are usually very noisy and may scatter over different sub-carriers. We propose a density-based preprocessing method to extract useful CSI amplitude patterns for effective respiration monitoring. We conduct extensive experiments with 8 subjects in a real home environment. WiPhone achieves a respiration rate error of 0.31 bpm (breaths per minute) on average in a range of NLoS settings.

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3379 ◽  
Author(s):  
Jialin Liu ◽  
Lei Wang ◽  
Jian Fang ◽  
Linlin Guo ◽  
Bingxian Lu ◽  
...  

Intense human motion, such as hitting, kicking, and falling, in some particular scenes indicates the occurrence of abnormal events like violence and school bullying. Camera-based human motion detection is an effective way to analyze human behavior and detect intense human motion. However, even if the camera is properly deployed, it will still generate blind spots. Moreover, camera-based methods cannot be used in places such as restrooms and dressing rooms due to privacy issues. In this paper, we propose a multi-target intense human motion detection scheme using commercial Wi-Fi infrastructures. Compared with human daily activities, intense human motion usually has the characteristics of intensity, rapid change, irregularity, large amplitude, and continuity. We studied the changing pattern of Channel State Information (CSI) influenced by intense human motion, and extracted features in the pattern by conducting a large number of experiments. Considering occlusion exists in some complex scenarios, we distinguished the Line-of-Sight (LOS) and Non-Line-of-Sight (NLOS) conditions in the case of obstacles appearing between the transmitter and the receiver, which further improves the overall performance. We implemented the intense human motion detection system using single commercial Wi-Fi devices, and evaluated it in real indoor environments. The experimental results show that our system can achieve intense human motion detection rate of 90%.


Sensors ◽  
2018 ◽  
Vol 18 (11) ◽  
pp. 4057 ◽  
Author(s):  
Viet-Hung Nguyen ◽  
Minh-Tuan Nguyen ◽  
Jeongsik Choi ◽  
Yong-Hwa Kim

Identifying channel states as line-of-sight or non-line-of-sight helps to optimize location-based services in wireless communications. The received signal strength identification and channel state information are used to estimate channel conditions for orthogonal frequency division multiplexing systems in indoor wireless local area networks. This paper proposes a joint convolutional neural network and recurrent neural network architecture to classify channel conditions. Convolutional neural networks extract the feature from frequency-domain characteristics of channel state information data and recurrent neural networks extract the feature from time-varying characteristics of received signal strength identification and channel state information between packet transmissions. The performance of the proposed methods is verified under indoor propagation environments. Experimental results show that the proposed method has a 2% improvement in classification performance over the conventional recurrent neural network model.


Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Boya Liu ◽  
Xiaobo Zhou

In this paper, an in-depth study of interactive visual communication of network topology through non-line-of-sight congestion control algorithms is conducted to address the real-time routing problem of adapting to dynamic topologies, and a delay-constrained stochastic routing algorithm is proposed to enable packets to reach GB within the delay threshold in the absence of end-to-end delay information while improving network throughput and reducing network resource consumption. The algorithm requires each sending node to select an available relay set based on the location of its neighbor nodes and channel state and computes transfer probabilities for each node in the relay set combining the remaining delay of the packet with the distance from the relay node to GB. Based on the obtained transfer probability and local channel state, the sending node passes the packet to the relay node. The convergence of the algorithm is proved and its performance is verified by simulation. The first part of the algorithm is based on the greedy algorithm to deploy and locate the network flying platform nodes with the goal of efficient coverage of the network flying platform nodes, considering the ground base station services. As the delay on each link varies due to the change of channel state, the source and relay nodes asynchronously update the data generation rate and the pairwise parameters based on the received local information and use the obtained optimal values to pass the packets to GB.


Sensors ◽  
2020 ◽  
Vol 20 (5) ◽  
pp. 1403
Author(s):  
Yanbin Zou ◽  
Huaping Liu

In time-of-arrival (TOA) localization systems, errors caused by non-line-of-sight (NLOS) signal propagation could significantly degrade the location accuracy. Existing works on NLOS error mitigation commonly assume that NLOS error statistics or the TOA measurement noise variances are known. Such information is generally unavailable in practice. The goal of this paper is to develop an NLOS error mitigation scheme without requiring such information. The core of the proposed algorithm is a constrained least-squares optimization, which is converted into a semidefinite programming (SDP) problem that can be easily solved by using the CVX toolbox. This scheme is then extended for cooperative source localization. Additionally, its performance is better than existing schemes for most of the scenarios, which will be validated via extensive simulation.


Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5321
Author(s):  
Yubo Wang ◽  
Weimin Yang ◽  
Zheng Wang ◽  
Wenjun Zhou ◽  
Liang Li ◽  
...  

In substations, a localization system based on a wireless sensor network (WSN) is a challenge, because the propagation of the measured signal could be blocked by various devices. In other words, non-line-of-sight (NLOS) propagation, where the signal propagation path is occluded, will affect measurement accuracy. A novel localization method based on a two-step weighted least squares and a probability distribution function is proposed to reduce the influence of NLOS error on the localization result. In this method, the initial multi-group localization result is obtained by the two-step weight weighted least-squares method, and the probability distribution function of the target is constructed by using the initial localization results, which can effectively reduce the influence of the NLOS error on the localization result. The simulation and test results show that the proposed method can keep the coordinate error within 30 cm in the substation. Compared with the localization result of two-step weighted least-squares (TSWLS) method, the average localization error is reduced by more than 1 m. Compared with the other two similar algorithms, the localization accuracy is improved by more than 50%. The tested results show that the localization performance of the method is robustness in the NLOS environment of the substation. While ensuring stability, the proposed algorithm is less efficient than some existing ones. However, under the calculation conditions of ordinary computers, the average single-point calculation time is less than 0.1 s, which can meet the needs of applications in substations.


2018 ◽  
Vol 14 (10) ◽  
pp. 155014771880469
Author(s):  
Nan Jing ◽  
Yu Sun ◽  
Lin Wang ◽  
Jinxin Shan

The ubiquitous wireless network infrastructure and the need of people’s indoor sensing inspire the work leveraging wireless signal into broad spectrum for indoor applications, including indoor localization, human–computer interaction, and activity recognition. To provide an accurate model selection or feature template, these applications take the system reliability of the signal in line-of-sight and non-line-of-sight propagation into account. Unfortunately, these two types of signal propagation are analyzed in static or mobile scenario separately. Our question is how to use the wireless signal to estimate the signal propagation ambience to facilitate the adaptive complex environment? In this paper, we exploit the Fresnel zone theory and channel state information (CSI) to model the static and mobile ambience detectors. Considering the spatiotemporal correlation of indoor activities, the propagation ambience can be divided into three categories: line-of-sight (LOS), non-line-of-sight (NLOS), and semi-line-of-sight (SLOS), which is used to represent the intermediate state between the LOS and NLOS propagation ambience during user movement. Leveraging the hidden Markov model to estimate the dynamic propagation ambience in the mobile environment, a novel propagation ambience identification method, named Ambience Sensor (Asor), is proposed to improve the real-time performance for the upper applications. Furthermore, Asor is integrated into a localization algorithm, Asor-based localization system (Aloc), to confirm the effectiveness. We prototype Asor and Aloc based on commodity WiFi infrastructure without any hardware modification. In addition, the real-time performance of Asor is evaluated by conducting tracking experiments. The experimental results show that the median detection rate of propagation ambience is superior to the existing methods in absence of any a priori hypothesis of static or mobile scenarios.


2020 ◽  
Vol 16 (2) ◽  
pp. 155014772090363
Author(s):  
Pan Feng ◽  
Danyang Qin ◽  
Guangchao Xu ◽  
Ruolin Guo ◽  
Min Zhao

Positioning by wireless sensor network is one of its main functions and has been widely used in many fields. However, when signal propagation is hindered, serious errors, non-line-of-sight errors, occur. In order to solve this problem, this article proposes an improved particle filter algorithm, which introduces the idea of residual analysis to improve reliability. The algorithm assigns weights to the particles based on the residuals and selects the appropriate particles. In addition, the non-line-of-sight error parameter [Formula: see text] is introduced, and the second selection is made according to [Formula: see text], which considers the influence of non-line-of-sight error. The non-line-of-sight error is greatly reduced after two selections. The simulation is performed under several different non-line-of-sight errors, and results show that the algorithm is superior to Kalman filter and particle filter.


Sign in / Sign up

Export Citation Format

Share Document