Large-Area, Multilayered, and High-Resolution Visual Monitoring Using a Dual-Camera System

2015 ◽  
Vol 11 (2) ◽  
pp. 1-23 ◽  
Author(s):  
Chih-Wei Lin ◽  
Kuan-Wen Chen ◽  
Shen-Chi Chen ◽  
Cheng-Wu Chen ◽  
Yi-Ping Hung
Keyword(s):  
High Resolution ◽  
Large Area ◽  
Camera System ◽  
Visual Monitoring

Study of Tip-Surface Interactions in Scanning Tunneling Microscopy (STM) by Reflection Electron Microscopy (REM)

1990 ◽  
Vol 48 (1) ◽  
pp. 320-321
Author(s):  
W. Lo ◽  
J.C.H. Spence ◽  
M. Kuwabara
Keyword(s):  
High Resolution ◽  
Elastic Strain ◽  
Tunneling Current ◽  
Surface Damage ◽  
Surface Interactions ◽  
Graphite Surface ◽  
Scanning Tunneling ◽  
Large Area ◽  
Tunneling Microscopy ◽  
High Resolution Tem

Work on the integration of STM with REM has demonstrated the usefulness of this combination. The STM has been designed to replace the side entry holder of a commercial Philips 400T TEM. It allows simultaneous REM imaging of the tip/sample region of the STM (see fig. 1). The REM technique offers nigh sensitivity to strain (<10−4) through diffraction contrast and high resolution (<lnm) along the unforeshortened direction. It is an ideal technique to use for studying tip/surface interactions in STM.The elastic strain associated with tunnelling was first imaged on cleaved, highly doped (S doped, 5 × 1018cm-3) InP(110). The tip and surface damage observed provided strong evidence that the strain was caused by tip/surface contact, most likely through an insulating adsorbate layer. This is consistent with the picture that tunnelling in air, liquid or ordinary vacuum (such as in a TEM) occurs through a layer of contamination. The tip, under servo control, must compress the insulating contamination layer in order to get close enough to the sample to tunnel. The contaminant thereby transmits the stress to the sample. Elastic strain while tunnelling from graphite has been detected by others, but never directly imaged before. Recent results using the STM/REM combination has yielded the first direct evidence of strain while tunnelling from graphite. Figure 2 shows a graphite surface elastically strained by the STM tip while tunnelling (It=3nA, Vtip=−20mV). Video images of other graphite surfaces show a reversible strain feature following the tip as it is scanned. The elastic strain field is sometimes seen to extend hundreds of nanometers from the tip. Also commonly observed while tunnelling from graphite is an increase in the RHEED intensity of the scanned region (see fig.3). Debris is seen on the tip and along the left edges of the brightened scan region of figure 4, suggesting that tip abrasion of the surface has occurred. High resolution TEM images of other tips show what appear to be attached graphite flakes. The removal of contamination, possibly along with the top few layers of graphite, seems a likely explanation for the observed increase in RHEED reflectivity. These results are not inconsistent with the “sliding planes” model of tunnelling on graphite“. Here, it was proposed that the force due to the tunnelling probe acts over a large area, causing shear of the graphite planes when the tip is scanned. The tunneling current is then modulated as the planes of graphite slide in and out of registry. The possiblity of true vacuum tunnelling from the cleaned graphite surface has not been ruled out. STM work function measurements are needed to test this.

High Resolution Displacement of Functional Groups onto Fluorocarbon Resin Surface by Using ArF Excimer Laser

1996 ◽  
Vol 451 ◽  
Author(s):  
T. Shimizu ◽  
M. Murahara
Keyword(s):  
Contact Angle ◽  
High Resolution ◽  
Laser Beam ◽  
Thin Layer ◽  
Functional Groups ◽  
Excimer Laser ◽  
Laser Fluence ◽  
Large Area ◽  
Three Solutions ◽  
Arf Excimer Laser

ABSTRACTA Fluorocarbon resin surface was selectively modified by irradiation with a ArF laser beam through a thin layer of NaAlO2, B(OH)3, or H2O solution to give a hydrophilic property. As a result, with low fluence, the surface was most effectively modified with the NaAlO2 solution among the three solutions. However, the contact angle in this case changed by 10 degrees as the fluence changed only 1mJ/cm2. When modifying a large area of the surface, high resolution displacement could not be achieved because the laser beam was not uniform in displacing functional groups. Thus, the laser fluence was successfully made uniform by homogenizing the laser beam; the functional groups were replaced on the fluorocarbon resin surface with high resolution, which was successfully modified to be hydrophilic by distributing the laser fluence uniformly.

Mapping and Monitoring of the Land Use/Cover Changes in the Wider Area of ltanos, Crete, Using Very High Resolution EO Imagery With Specific Interest in Archaeological Sites

2019 ◽  
Author(s):  
Sawyer Reid stippa ◽  
George Petropoulos ◽  
Leonidas Toulios ◽  
Prashant K. Srivastava
Keyword(s):  
High Resolution ◽  
Spatial Resolution ◽  
Satellite Images ◽  
Archaeological Site ◽  
Digital Photography ◽  
Archaeological Sites ◽  
Large Area ◽  
High Resolution Imagery ◽  
Site Mapping ◽  
Rule Sets

Archaeological site mapping is important for both understanding the history as well as protecting them from excavation during the developmental activities. As archaeological sites generally spread over a large area, use of high spatial resolution remote sensing imagery is becoming increasingly applicable in the world. The main objective of this study was to map the land cover of the Itanos area of Crete and of its changes, with specific focus on the detection of the landscape’s archaeological features. Six satellite images were acquired from the Pleiades and WorldView-2 satellites over a period of 3 years. In addition, digital photography of two known archaeological sites was used for validation. An Object Based Image Analysis (OBIA) classification was subsequently developed using the five acquired satellite images. Two rule-sets were created, one using the standard four bands which both satellites have and another for the two WorldView-2 images their four extra bands included. Validation of the thematic maps produced from the classification scenarios confirmed a difference in accuracy amongst the five images. Comparing the results of a 4-band rule-set versus the 8-band showed a slight increase in classification accuracy using extra bands. The resultant classifications showed a good level of accuracy exceeding 70%. Yet, separating the archaeological sites from the open spaces with little or no vegetation proved challenging. This was mainly due to the high spectral similarity between rocks and the archaeological ruins. The satellite data spatial resolution allowed for the accuracy in defining larger archaeological sites, but still was a difficulty in distinguishing smaller areas of interest. The digital photography data provided a very good 3D representation for the archaeological sites, assisting as well in validating the satellite-derived classification maps. All in all, our study provided further evidence that use of high resolution imagery may allow for archaeological sites to be located, but only where they are of a suitable size archaeological features.

scholarly journals Rapid Single Image-Based DTM Estimation from ExoMars TGO CaSSIS Images Using Generative Adversarial U-Nets

2021 ◽  
Vol 13 (15) ◽  
pp. 2877
Author(s):  
Yu Tao ◽  
Siting Xiong ◽  
Susan J. Conway ◽  
Jan-Peter Muller ◽  
Anthony Guimpier ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
Imaging System ◽  
Landing Site ◽  
Parameter Tuning ◽  
Processing Parameters ◽  
Input Image ◽  
Large Area ◽  
Laser Altimeter ◽  
Imaging Science

The lack of adequate stereo coverage and where available, lengthy processing time, various artefacts, and unsatisfactory quality and complexity of automating the selection of the best set of processing parameters, have long been big barriers for large-area planetary 3D mapping. In this paper, we propose a deep learning-based solution, called MADNet (Multi-scale generative Adversarial u-net with Dense convolutional and up-projection blocks), that avoids or resolves all of the above issues. We demonstrate the wide applicability of this technique with the ExoMars Trace Gas Orbiter Colour and Stereo Surface Imaging System (CaSSIS) 4.6 m/pixel images on Mars. Only a single input image and a coarse global 3D reference are required, without knowing any camera models or imaging parameters, to produce high-quality and high-resolution full-strip Digital Terrain Models (DTMs) in a few seconds. In this paper, we discuss technical details of the MADNet system and provide detailed comparisons and assessments of the results. The resultant MADNet 8 m/pixel CaSSIS DTMs are qualitatively very similar to the 1 m/pixel HiRISE DTMs. The resultant MADNet CaSSIS DTMs display excellent agreement with nested Mars Reconnaissance Orbiter Context Camera (CTX), Mars Express’s High-Resolution Stereo Camera (HRSC), and Mars Orbiter Laser Altimeter (MOLA) DTMs at large-scale, and meanwhile, show fairly good correlation with the High-Resolution Imaging Science Experiment (HiRISE) DTMs for fine-scale details. In addition, we show how MADNet outperforms traditional photogrammetric methods, both on speed and quality, for other datasets like HRSC, CTX, and HiRISE, without any parameter tuning or re-training of the model. We demonstrate the results for Oxia Planum (the landing site of the European Space Agency’s Rosalind Franklin ExoMars rover 2023) and a couple of sites of high scientific interest.

scholarly journals Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Peipei Du ◽  
Jinghui Li ◽  
Liang Wang ◽  
Liang Sun ◽  
Xi Wang ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Scale Production ◽  
Nonradiative Recombination ◽  
Large Area ◽  
Spatial Confinement ◽  
Light Emitting ◽  
Large Scale Production

AbstractWith rapid advances of perovskite light-emitting diodes (PeLEDs), the large-scale fabrication of patterned PeLEDs towards display panels is of increasing importance. However, most state-of-the-art PeLEDs are fabricated by solution-processed techniques, which are difficult to simultaneously achieve high-resolution pixels and large-scale production. To this end, we construct efficient CsPbBr3 PeLEDs employing a vacuum deposition technique, which has been demonstrated as the most successful route for commercial organic LED displays. By carefully controlling the strength of the spatial confinement in CsPbBr3 film, its radiative recombination is greatly enhanced while the nonradiative recombination is suppressed. As a result, the external quantum efficiency (EQE) of thermally evaporated PeLED reaches 8.0%, a record for vacuum processed PeLEDs. Benefitting from the excellent uniformity and scalability of the thermal evaporation, we demonstrate PeLED with a functional area up to 40.2 cm2 and a peak EQE of 7.1%, representing one of the most efficient large-area PeLEDs. We further achieve high-resolution patterned perovskite film with 100 μm pixels using fine metal masks, laying the foundation for potential display applications. We believe the strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

scholarly journals Ice Fog and Light Snow Measurements Using a High-Resolution Camera System

2016 ◽  
Vol 173 (9) ◽  
pp. 3049-3064 ◽  
Author(s):  
Thomas Kuhn ◽  
Ismail Gultepe
Keyword(s):  
High Resolution ◽  
Camera System ◽  
Ice Fog

scholarly journals Design of a hardware/software FPGA-based driver system for a large area high resolution CCD image sensor

2014 ◽  
Vol 4 (3) ◽  
pp. 274-280 ◽  
Author(s):  
Ying Chen ◽  
Wanpeng Xu ◽  
Rongsheng Zhao ◽  
Xiangning Chen
Keyword(s):  
High Resolution ◽  
Image Sensor ◽  
Large Area ◽  
Ccd Image Sensor ◽  
Ccd Image

scholarly journals A Downscaling–Merging Scheme for Improving Daily Spatial Precipitation Estimates Based on Random Forest and Cokriging

2021 ◽  
Vol 13 (11) ◽  
pp. 2040
Author(s):  
Xin Yan ◽  
Hua Chen ◽  
Bingru Tian ◽  
Sheng Sheng ◽  
Jinxing Wang ◽  
...  
Keyword(s):  
High Resolution ◽  
Random Forest ◽  
Spatial Resolution ◽  
Daily Precipitation ◽  
Machine Learning Algorithms ◽  
Precipitation Data ◽  
Large Area ◽  
Tree Model ◽  
Daily Precipitation Data ◽  
Precipitation Estimates

High-spatial-resolution precipitation data are of great significance in many applications, such as ecology, hydrology, and meteorology. Acquiring high-precision and high-resolution precipitation data in a large area is still a great challenge. In this study, a downscaling–merging scheme based on random forest and cokriging is presented to solve this problem. First, the enhanced decision tree model, which is based on random forest from machine learning algorithms, is used to reduce the spatial resolution of satellite daily precipitation data to 0.01°. The downscaled satellite-based daily precipitation is then merged with gauge observations using the cokriging method. The scheme is applied to downscale the Global Precipitation Measurement Mission (GPM) daily precipitation product over the upstream part of the Hanjiang Basin. The experimental results indicate that (1) the downscaling model based on random forest can correctly spatially downscale the GPM daily precipitation data, which retains the accuracy of the original GPM data and greatly improves their spatial details; (2) the GPM precipitation data can be downscaled on the seasonal scale; and (3) the merging method based on cokriging greatly improves the accuracy of the downscaled GPM daily precipitation data. This study provides an efficient scheme for generating high-resolution and high-quality daily precipitation data in a large area.

Large-area, high-resolution optical anisotropy imaging with polarization-sensitive Fourier ptychoraphy

2021 ◽  
Author(s):  
Seungri Song ◽  
Jeongsoo Kim ◽  
Sunwoong Hur ◽  
Jaewoo Song ◽  
Chulmin Joo
Keyword(s):  
High Resolution ◽  
Optical Anisotropy ◽  
Large Area
Sign in / Sign up

Export Citation Format

Share Document