Hybrid high-performance low-power and ultra-low energy reliable caches

2011 ◽  
Author(s):  
Bojan Maric ◽  
Jaume Abella ◽  
Francisco J. Cazorla ◽  
Mateo Valero
Keyword(s):  
Low Power ◽  
High Performance ◽  
Low Energy

Low-energy contamination of Mo microsource X-ray radiation: analysis and solution of the problem

2011 ◽  
Vol 44 (4) ◽  
pp. 763-771 ◽  
Author(s):  
Piero Macchi ◽  
Hans-Beat Bürgi ◽  
Abita S. Chimpri ◽  
Jürg Hauser ◽  
Zoltán Gál
Keyword(s):  
Low Power ◽  
High Performance ◽  
Low Energy ◽  
Laboratory Scale ◽  
Characteristic Radiation ◽  
X Ray ◽  
Significant Contamination

In recent years, microsource sealed tubes in combination with multilayer optics have been adopted in many crystallography laboratories for very low power X-ray generation, monochromatization and high-brilliance microfocusing. All these factors allow high-performance experiments on a laboratory scale. However, a fundamental defect of this technology has been discovered, namely a significant contamination of the characteristic radiation by low-energy photons. Some simple experiments are reported, showing that the contamination can significantly reduce the accuracy of the measured intensities, especially when Mo Kα radiation is used. A simple and economic solution to the problem is proposed: an aluminium filter approximately 100 µm thick, which efficiently removes the low-energy contaminant photons.

Efficient Instruction and Data Caching for High Performance Embedded Processors

1970 ◽  
pp. 9
Author(s):  
A. Ferrerón Labari ◽  
D. Suárez Gracia ◽  
V. Viñals Yúfera
Keyword(s):  
Embedded Systems ◽  
Power Consumption ◽  
Low Power ◽  
Interconnection Networks ◽  
High Performance ◽  
Critical Issue ◽  
Content Management ◽  
Structure Design ◽  
Portable Devices ◽  
On Chip

In the last years, embedded systems have evolved so that they offer capabilities we could only find before in high performance systems. Portable devices already have multiprocessors on-chip (such as PowerPC 476FP or ARM Cortex A9 MP), usually multi-threaded, and a powerful multi-level cache memory hierarchy on-chip. As most of these systems are battery-powered, the power consumption becomes a critical issue. Achieving high performance and low power consumption is a high complexity challenge where some proposals have been already made. Suarez et al. proposed a new cache hierarchy on-chip, the LP-NUCA (Low Power NUCA), which is able to reduce the access latency taking advantage of NUCA (Non-Uniform Cache Architectures) properties. The key points are decoupling the functionality, and utilizing three specialized networks on-chip. This structure has been proved to be efficient for data hierarchies, achieving a good performance and reducing the energy consumption. On the other hand, instruction caches have different requirements and characteristics than data caches, contradicting the low-power embedded systems requirements, especially in SMT (simultaneous multi-threading) environments. We want to study the benefits of utilizing small tiled caches for the instruction hierarchy, so we propose a new design, ID-LP-NUCAs. Thus, we need to re-evaluate completely our previous design in terms of structure design, interconnection networks (including topologies, flow control and routing), content management (with special interest in hardware/software content allocation policies), and structure sharing. In CMP environments (chip multiprocessors) with parallel workloads, coherence plays an important role, and must be taken into consideration.

High-Performance and Low-Power Full Color Reflective LCD for New Applications

2019 ◽  
pp. 1411
Author(s):  
Hiroyuki Hakoi ◽  
Ming Ni ◽  
Junichi Hashimoto ◽  
Takashi Sato ◽  
Shinji Shimada ◽  
...  
Keyword(s):  
Low Power ◽  
High Performance ◽  
Full Color ◽  
New Applications

Performance Analysis of Various Multipliers Using 8T-full Adder with 180nm Technology

2020 ◽  
Vol 13 (6) ◽  
pp. 864-870
Author(s):  
Sai Venkatramana Prasada G.S ◽  
G. Seshikala ◽  
S. Niranjana
Keyword(s):  
Low Power ◽  
Power Dissipation ◽  
High Speed ◽  
High Performance ◽  
Full Adder ◽  
Fundamental Operation ◽  
Wallace Tree ◽  
Power Delay Product ◽  
The Comparative Study ◽  
Wallace Tree Multiplier

Background: This paper presents the comparative study of power dissipation, delay and power delay product (PDP) of different full adders and multiplier designs. Methods: Full adder is the fundamental operation for any processors, DSP architectures and VLSI systems. Here ten different full adder structures were analyzed for their best performance using a Mentor Graphics tool with 180nm technology. Results: From the analysis result high performance full adder is extracted for further higher level designs. 8T full adder exhibits high speed, low power delay and low power delay product and hence it is considered to construct four different multiplier designs, such as Array multiplier, Baugh Wooley multiplier, Braun multiplier and Wallace Tree multiplier. These different structures of multipliers were designed using 8T full adder and simulated using Mentor Graphics tool in a constant W/L aspect ratio. Conclusion: From the analysis, it is concluded that Wallace Tree multiplier is the high speed multiplier but dissipates comparatively high power. Baugh Wooley multiplier dissipates less power but exhibits more time delay and low PDP.

scholarly journals Optimization of a Low-Power Chemoresistive Gas Sensor: Predictive Thermal Modelling and Mechanical Failure Analysis

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 783 ◽  
Author(s):  
Andrea Gaiardo ◽  
David Novel ◽  
Elia Scattolo ◽  
Michele Crivellari ◽  
Antonino Picciotto ◽  
...  
Keyword(s):  
Low Power ◽  
Failure Analysis ◽  
Gas Sensors ◽  
High Performance ◽  
Gas Sensing ◽  
Mechanical Failure ◽  
Sensing Applications ◽  
Theoretical Approaches ◽  
Sensing Material ◽  
Silicon Bulk

The substrate plays a key role in chemoresistive gas sensors. It acts as mechanical support for the sensing material, hosts the heating element and, also, aids the sensing material in signal transduction. In recent years, a significant improvement in the substrate production process has been achieved, thanks to the advances in micro- and nanofabrication for micro-electro-mechanical system (MEMS) technologies. In addition, the use of innovative materials and smaller low-power consumption silicon microheaters led to the development of high-performance gas sensors. Various heater layouts were investigated to optimize the temperature distribution on the membrane, and a suspended membrane configuration was exploited to avoid heat loss by conduction through the silicon bulk. However, there is a lack of comprehensive studies focused on predictive models for the optimization of the thermal and mechanical properties of a microheater. In this work, three microheater layouts in three membrane sizes were developed using the microfabrication process. The performance of these devices was evaluated to predict their thermal and mechanical behaviors by using both experimental and theoretical approaches. Finally, a statistical method was employed to cross-correlate the thermal predictive model and the mechanical failure analysis, aiming at microheater design optimization for gas-sensing applications.

scholarly journals Ultracompact and low-power-consumption silicon thermo-optic switch for high-speed data

Nanophotonics ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 937-945
Author(s):  
Ruihuan Zhang ◽  
Yu He ◽  
Yong Zhang ◽  
Shaohua An ◽  
Qingming Zhu ◽  
...  
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
High Performance ◽  
Pulse Amplitude ◽  
Telecommunication Networks ◽  
Low Power Consumption ◽  
Power Efficient ◽  
High Speed Data ◽  
On Chip

AbstractUltracompact and low-power-consumption optical switches are desired for high-performance telecommunication networks and data centers. Here, we demonstrate an on-chip power-efficient 2 × 2 thermo-optic switch unit by using a suspended photonic crystal nanobeam structure. A submilliwatt switching power of 0.15 mW is obtained with a tuning efficiency of 7.71 nm/mW in a compact footprint of 60 μm × 16 μm. The bandwidth of the switch is properly designed for a four-level pulse amplitude modulation signal with a 124 Gb/s raw data rate. To the best of our knowledge, the proposed switch is the most power-efficient resonator-based thermo-optic switch unit with the highest tuning efficiency and data ever reported.

High-Performance and Low-Energy Loss Organic Solar Cells with Non-fused Ring Acceptor by Alkyl Chain Engineering

2021 ◽  
pp. 129768
Author(s):  
Dou Luo ◽  
Xue Lai ◽  
Nan Zheng ◽  
Chenghao Duan ◽  
Zhaojin Wang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Energy Loss ◽  
Organic Solar Cells ◽  
High Performance ◽  
Alkyl Chain ◽  
Low Energy ◽  
Fused Ring
Sign in / Sign up

Export Citation Format

Share Document