scholarly journals About this title - Integrated Fault Seal Analysis

10.1144/sp496 ◽  
2020 ◽  
Vol 496 (1) ◽  
pp. NP-NP
Author(s):  
S. R. Ogilvie ◽  
S. J. Dee ◽  
R. W. Wilson ◽  
W. R. Bailey

Faults commonly trap fluids such as hydrocarbons and water and therefore are of economic significance. During hydrocarbon field development, smaller faults can provide baffles and/or conduits to flow. There are relatively simple, well established workflows to carry out a fault seal analysis for siliciclastic rocks based primarily on clay content. There are, however, outstanding challenges related to other rock types, to calibrating fault seal models (with static and dynamic data) and to handling uncertainty.The variety of studies presented here demonstrate the types of data required and workflows followed in today's environment in order to understand the uncertainties, risks and upsides associated with fault-related fluid flow. These studies span all parts of the hydrocarbon value chain from exploration to production but are also of relevance for other industries such as radioactive waste and CO2 containment.

2020 ◽  
Vol 496 (1) ◽  
pp. 1-8 ◽  
Author(s):  
Steven R. Ogilvie ◽  
Steve J. Dee ◽  
Robert W. Wilson ◽  
Wayne R. Bailey

AbstractFaults commonly trap and impact the flow of fluids such as hydrocarbons and water over a range of timescales and therefore are of economic significance. During hydrocarbon exploration, analysis of the sealing capacity of faults can impact both the assessment of the probability of finding hydrocarbons and also the estimate of the likely resource range. During hydrocarbon field development, smaller faults can provide seals, baffles and/or conduits to flow. There are relatively simple, well-established workflows to carry out a fault seal analysis for siliciclastic rocks based primarily on clay content. There are, however, outstanding challenges related to other rock types, to calibrating fault seal models (with static and dynamic data) and to handling uncertainty. The variety of studies presented here demonstrate the types of data required and workflows followed in today's environment in order to understand the uncertainties, risks and upsides associated with fault-related fluid flow. These studies span all parts of the hydrocarbon value chain from exploration to production but are also of relevance for other industries such as radioactive waste and CO2 containment.


Author(s):  
Seyed Kourosh Mahjour ◽  
Antonio Alberto Souza Santos ◽  
Manuel Gomes Correia ◽  
Denis José Schiozer

AbstractThe simulation process under uncertainty needs numerous reservoir models that can be very time-consuming. Hence, selecting representative models (RMs) that show the uncertainty space of the full ensemble is required. In this work, we compare two scenario reduction techniques: (1) Distance-based Clustering with Simple Matching Coefficient (DCSMC) applied before the simulation process using reservoir static data, and (2) metaheuristic algorithm (RMFinder technique) applied after the simulation process using reservoir dynamic data. We use these two methods as samples to investigate the effect of static and dynamic data usage on the accuracy and rate of the scenario reduction process focusing field development purposes. In this work, a synthetic benchmark case named UNISIM-II-D considering the flow unit modelling is used. The results showed both scenario reduction methods are reliable in selecting the RMs from a specific production strategy. However, the obtained RMs from a defined strategy using the DCSMC method can be applied to other strategies preserving the representativeness of the models, while the role of the strategy types to select the RMs using the metaheuristic method is substantial so that each strategy has its own set of RMs. Due to the field development workflow in which the metaheuristic algorithm is used, the number of required flow simulation models and the computational time are greater than the workflow in which the DCSMC method is applied. Hence, it can be concluded that static reservoir data usage on the scenario reduction process can be more reliable during the field development phase.


1995 ◽  
Vol 32 (10) ◽  
pp. 1699-1719 ◽  
Author(s):  
Bruce E. Nesbitt ◽  
Karlis Muehlenbachs

In conjunction with the Lithoprobe southern Canadian Cordillera program, an extensive examination of geochemical indicators of origins, movement, chemical evolution, and economic significance of paleocrustal fluids was conducted. The study area covers approximately 360 000 km2from the Canadian Rockies to Vancouver Island. Research incorporated petrological, mineralogical, fluid-inclusion, δ18O, δD, δ13C, and Rb/Sr studies of samples of quartz ± carbonate veins and other rock types. The results of the study document a variety of pre-, syn-, and postorogenic, crustal fluid events. In the Rockies, a major pre-Laramide hydrothermal event was identified, which was comprised of a west to east migration of warm, saline brines. This was followed by a major circulation of meteoric water in the Rockies during Laramide uplift. In the southern Omineca extensional zone, convecting surface fluids penetrated to the brittle–ductile transition at 350–450 °C and locally into the underlying more ductile rocks. A principal conclusion of the study is that most quartz ± carbonate veins in metamorphic rocks in the southern Canadian Cordillera precipitated from deeply converted surface fluids. This conclusion supports a surface fluid convection model for the genesis of mesothermal Au–quartz veins, common in greenschist-facies rocks worldwide. The combination of our geochemical results with the results of other Lithoprobe studies indicates that widespread and deep convection of surface fluids in rocks undergoing active metamorphism is a commonplace phenomena in extensional settings, while in compressional-thrust settings the depth of penetration of surface fluids is more limited.


2020 ◽  
Vol 47 (3) ◽  
pp. 119-142
Author(s):  
Roger H. Mitchell

Lamproite is a rare ultrapotassic alkaline rock of petrological importance as it is considered to be derived from metasomatized lithospheric mantle, and of economic significance, being the host of major diamond deposits. A review of the nomenclature of lamproite results in the recommendation that members of the lamproite petrological clan be named using mineralogical-genetic classifications to distinguish them from other genetically unrelated potassic alkaline rocks, kimberlite, and diverse lamprophyres. The names “Group 2 kimberlite” and “orangeite” must be abandoned as these rock types are varieties of bona fide lamproite restricted to the Kaapvaal Craton. Lamproites exhibit extreme diversity in their mineralogy which ranges from olivine phlogopite lamproite, through phlogopite leucite lamproite and potassic titanian richterite-diopside lamproite, to leucite sanidine lamproite. Diamondiferous olivine lamproites are hybrid rocks extensively contaminated by mantle-derived xenocrystic olivine. Currently, lamproites are divided into cratonic (e.g. Leucite Hills, USA; Baifen, China) and orogenic (Mediterranean) varieties (e.g. Murcia-Almeria, Spain; Afyon, Turkey; Xungba, Tibet). Each cratonic and orogenic lamproite province differs significantly in tectonic setting and Sr–Nd–Pb–Hf isotopic compositions. Isotopic compositions indicate derivation from enriched mantle sources, having long-term low Sm/Nd and high Rb/Sr ratios, relative to bulk earth and depleted asthenospheric mantle. All lamproites are considered, on the basis of their geochemistry, to be derived from ancient mineralogically complex K–Ti–Ba–REE-rich veins, or metasomes, in the lithospheric mantle with, or without, subsequent contributions from recent asthenospheric or subducted components at the time of genesis. Lamproite primary magmas are considered to be relatively silica-rich (~50–60 wt.% SiO2), MgO-poor (3–12 wt.%), and ultrapotassic (~8–12 wt.% K2O) as exemplified by hyalo-phlogopite lamproites from the Leucite Hills (Wyoming) or Smoky Butte (Montana). Brief descriptions are given of the most important phreatomagmatic diamondiferous lamproite vents. The tectonic processes which lead to partial melting of metasomes, and/or initiation of magmatism, are described for examples of cratonic and orogenic lamproites. As each lamproite province differs with respect to its mineralogy, geochemical evolution, and tectonic setting there is no simple or common petrogenetic model for their genesis. Each province must be considered as the unique expression of the times and vagaries of ancient mantle metasomatism, coupled with diverse and complex partial melting processes, together with mixing of younger asthenospheric and lithospheric material, and, in the case of many orogenic lamproites, with Paleogene to Recent subducted material.


1984 ◽  
Vol 44 ◽  
Author(s):  
E. J. Nowak

AbstractDiffusivities were measured for plutonium in brine-saturated compacted Wyoming bentonite. Complexities of the solution chemistry and retardation of transuranics necessitate diffusion studies under conditions that are specific for repository host rock types in this case salt. Diffusivity values in the range of 10−15 to 10−14 m2/s were obtained for bentonite at a packing density of 1800 kg/m3. That density was obtained by compaction at 15 i0Pa, a typical lithostatic pressure in a repository in salt at 650 m depth. Even a 0.05 m (2 inch) thick bentonite-containing engineered barrier could decrease radionuclide release rates by approximately 4 orders-of-magnitude if the diffusivity for that radionuclide were in the observed range of 10−15 to 10−14 m2/s. These results confirm the effectiveness of uncompacted bentonite-containing materials as engineered barriers for radioactive waste isolation.


2019 ◽  
Author(s):  
Dutta Dipankar ◽  
Al-Khalifa Nasser ◽  
Prasad Raj Kishore ◽  
Al-Rashidi Tahani ◽  
Al-Subaihi Meshari ◽  
...  

Crystalline rocks, particularly granitic rocks and basalts, are one of the principal rock types under consideration as a potential host rock for a high-level radioactive waste repository. Permeability in such rocks is related to discontinuities of various scales, and the quantification and prediction of groundwater flow within both the fractures and the intact rock between the fractures is the major goal of field experiments. The Canadian Underground Research Laboratory is unique in that the hydrogeological conditions within a large volume of rock surrounding the experimental shaft are being monitored before, during and after excavation and the results compared with model predictions. In Switzerland twelve deep boreholes are being drilled to over 1000 m to investigate crystalline basement rocks beneath a cover of sediments. The Stripa Mine in Sweden has hosted a major experimental programme including heater tests to stimulate the thermal effect of radioactive waste and hydrogeological tests at various scales down to individual fractures. The United States of America, the United Kingdom, France and Finland have also embarked on major experimental programmes. Continuing research is needed, with an emphasis on field experiments and research in underground rooms, to provide the data on which detailed risk assessments can be based.


Sign in / Sign up

Export Citation Format

Share Document