40Ar/39Ar dating of synkinematic white mica: insights from fluid-rock reaction in low-grade shear zones (Mont Blanc Massif) and constraints on timing of deformation in the NW external Alps

2008 ◽  
Vol 299 (1) ◽  
pp. 293-315 ◽  
Author(s):  
Y. Rolland ◽  
M. Rossi ◽  
S. F. Cox ◽  
M. Corsini ◽  
N. Mancktelow ◽  
...  
2011 ◽  
Vol 149 (2) ◽  
pp. 208-220 ◽  
Author(s):  
UWE RING ◽  
ARNE P. WILLNER ◽  
PAUL W. LAYER ◽  
PETER P. RICHTER

AbstractWe describe the geometry and kinematics of a Jurassic to Early Cretaceous transpressive sinistral strike-slip system within a metamorphic basement inlier of the Mesozoic magmatic arc near Bahia Agua Dulce at latitudes 31–32°S in north-central Chile and discuss possible relations with the Atacama Fault System further north. Sinistral transpression overprints structures of an accretionary system that is represented by the metamorphic basement. Sub-vertical semi-ductile NNW-striking strike-slip shear zones are the most conspicuous structures. Chlorite and sericite grew, and white mica and quartz dynamically recrystallized, suggesting low-grade metamorphic conditions during semi-ductile deformation. Folds at the 10–100 metre scale developed before and during strike-slip shearing. The folds are deforming a former sub-horizontal transposition foliation that originated during prior accretion processes. The folds have axes sub-parallel to the strike-slip shear zones and sub-vertical axial surfaces indicating a component of shortening parallel to the shear-zone boundaries, suggesting an overall transpressive deformation regime. Transpressive strike-slip deformation also affects Middle Triassic (Anisian) basal breccias of the El Quereo Formation.40Ar–39Ar laser ablation ages of synkinematically recrystallized white mica in one of the shear zones provide an age of 174–165 Ma for the waning stages of semi-ductile strike-slip shearing. The semi-ductile shear zones are cut by mafic and rhyolite dykes. Two rhyolite dykes yield40Ar–39Ar ages of 160.5 ± 1.7 Ma and 131.9 ± 1.7 Ma, respectively. The latter dyke has been affected by brittle faulting. Fault-slip analysis shows that the kinematics of the faulting event is similar to the one of the semi-ductile shearing event, suggesting that sinistral transpression continued after ~130 Ma. Timing, kinematics and geographic position suggest that the shear zones at Bahia Agua Dulce represent a southern continuation of the prominent Atacama Fault System that affected the Jurassic/Early Cretaceous arc over its ~1400 km length.


2013 ◽  
Vol 64 (5) ◽  
pp. 375-382 ◽  
Author(s):  
Franz Neubauer ◽  
Ana-Voica Bojar

Abstract Single grains of detrital white mica from the lowermost Upper Cretaceous Sinaia Flysch have been dated using the 40Ar/39Ar technique. The Sinaia Flysch was deposited in a trench between the Danubian and Getic microcontinental pieces after the closure of the Severin oceanic tract. The Danubian basement is largely composed of a Panafrican/Cadomian basement in contrast to the Getic/Supragetic units with a Variscan-aged basement, allowing the distinction between these two blocks. Dating of detrital mica from the Sinaia Flysch resulted in predominantly Variscan ages (329 ± 3 and 288 ± 4 Ma), which prove the Getic/Supragetic source of the infill of the Sinaia Trench. Subordinate Late Permian (263 ± 8 and 255 ±10 Ma), Early Jurassic (185 ± 4 and 183 ± 3 Ma) and Late Jurassic/Early Cretaceous (149 ± 3 and 140 ± 3 Ma) ages as well as a single Cretaceous age (98 ± 4 Ma) are interpreted as representing the exposure of likely retrogressive low-grade metamorphic ductile shear zones of various ages. Ductile shear zones with similar 40Ar/39Ar white mica ages are known in the Getic/Supragetic units. The Cretaceous ages also show that Cretaceous metamorphic units were already subject to erosion during the deposition of the Sinaia Flysch.


2020 ◽  
Author(s):  
Laura Airaghi ◽  
Benoit Dubacq ◽  
Gloter Alexandre ◽  
Verlaguet Anne ◽  
Bellahsen Nicolas

<p>Strain localisation in the upper crust is strongly influenced by the presence of phyllosilicates (e.g. white mica, biotite, chlorite), systematically observed in shear zones in granites. Identifying reactions involving phyllosilicates at low-grade metamorphic conditions is crucial to understand crust mechanics and fluid-granite interactions during deformation. In the 305 Ma old basement of the Bielsa massif (Axial Zone, Pyrenees), extensive pre-orogenic (i.e. pre-Alpine) alteration related to feldspar sericitization and chloritization of biotite and amphibole occurred at temperatures of 270–350°C at 230–300 Ma. This event was followed by mylonitization and fracturing at 40–70 Ma, and fluid–rock interaction at 200–280°C marked by replacement and new crystallization of chlorite and white mica. In undeformed parts of the granite, compositional maps reveal in situ reaction, high local heterogeneities and low element mobility (migration over few µm) for most elements. Transmission electron microscopy (TEM) shows disconnected reaction-induced nanoporosity in chloritized amphiboles and ripplocations in chloritized biotite. Chloritization reaction varies over tens of nanometres, indicating high variability of element availability. Equilibrium is reached locally due to isolation of fluid in pockets. In samples with fractures, both elemental maps and TEM images show two chlorite groups: alpine chlorites in fractures have homogeneous composition while pre-alpine chlorites in the matrix show patchy compositions. Channelization of fluids in fractures and sealing by chlorite prevented replacement of the matrix chlorite. High element mobility was therefore limited to fractures. In mylonites, compositional maps show secondary chlorites up to 1 mm around cracks and only partial replacement of chlorite within the matrix. This suggests fluids could percolate from cracks to the matrix along chlorite grain boundaries. TEM images show nanocracks at the boundary of chlorite crystallites where replacement is localised. Crystallites were individually replaced by dissolution-reprecipitation reactions and not by intra-crystallite mineral replacement, explaining the patchy compositional variations. While fracturing did not allow chlorite sheets to be progressively re-oriented, a continuous, brittle-ductile deformation in mylonites did, making preferential fluid pathways progressively change.  Despite high strain, chlorite replacement was not complete even in mylonites. Replacement appears to be controlled by matrix-fracture porosity contrasts and the location and connection of nanoporosity between crystallites, criteria that may be only transiently met in space during deformation. These mechanisms need to be taken into account when attempting to reconstruct the metamorphic history of shear zones as well as the evolution of their mechanical behaviour since they affect the scale of the thermodynamic equilibrium and the preservation of hydrothermal metamorphism in granites.</p>


2020 ◽  
pp. 467-495
Author(s):  
T. Baker ◽  
S. Mckinley ◽  
S. Juras ◽  
Y. Oztas ◽  
J. Hunt ◽  
...  

Abstract The Miocene Kışladağ deposit (~17 Moz), located in western Anatolia, Turkey, is one of the few global examples of Au-only porphyry deposits. It occurs within the West Tethyan magmatic belt that can be divided into Cretaceous, Cu-dominant, subduction-related magmatic arc systems and the more widespread Au-rich Cenozoic magmatic belts. In western Anatolia, Miocene magmatism was postcollisional and was focused in extension-related volcanosedimentary basins that formed in response to slab roll back and a major north-south slab tear. Kışladağ formed within multiple monzonite porphyry stocks and dikes at the contact between Menderes massif metamorphic basement and volcanic rocks of the Beydağı stratovolcano in the Uşak-Güre basin. The mineralized magmatic-hydrothermal system formed rapidly (<400 kyr) between ~14.75 and 14.36 Ma in a shallow (<1 km) volcanic environment. Volcanism continued to at least 14.26 ± 0.09 Ma based on new age data from a latite lava flow at nearby Emiril Tepe. Intrusions 1 and 2 were the earliest (14.73 ± 0.05 and 14.76 ± 0.01 Ma, respectively) and best mineralized phases (average median grades of 0.64 and 0.51 g/t Au, respectively), whereas younger intrusions host progressively less Au (Intrusion 2A: 14.60 ± 0.06 Ma and 0.41 g/t Au; Intrusion 2 NW: 14.45 ± 0.08 Ma and 0.41 g/t Au; Intrusion 3: 14.39 ± 0.06 and 14.36 ± 0.13 Ma and 0.19 g/t Au). A new molybdenite age of 14.60 ± 0.07 Ma is within uncertainty of the previously published molybdenite age (14.49 ± 0.06 Ma), and supports field observations that the bulk of the mineralization formed prior to the emplacement of Intrusion 3. Intrusions 1 and 2 are altered to potassic (biotite-K-feldspar-quartz ± magnetite) and younger but deeper sodic-calcic (feldspar-amphibole-magnetite ± quartz ± carbonate) assemblages, both typically pervasive with disseminated to veinlet-hosted pyrite ± chalcopyrite ± molybdenite and localized quartz-feldspar stockwork veinlets and sodic-calcic breccias. Tourmaline-white mica-quartz-pyrite alteration surrounds the potassic core both within the intrusions and outboard in the volcanic rocks. Tourmaline was most strongly developed on the inner margins of the tourmaline-white mica zone, particularly along the Intrusion 1 volcanic contact where it formed breccias and veins, including Maricunga-style veinlets. Field relationships show that the early magmatic-hydrothermal events were cut by Intrusion 2A, which was then overprinted by Au-bearing argillic (kaolinite-pyrite ± quartz) alteration, followed by Intrusion 3 and late-stage, low-grade to barren argillic and advanced argillic alteration (quartz-pyrite ± alunite ± dickite ± pyrophyllite). Gold deportment changes with each successive hydrothermal event. The early potassic and sodic-calcic alteration controls much of the original Au distribution, with the Au dominantly deposited with feldspar and lesser quartz and pyrite. Tourmaline-white mica and argillic alteration events overprinted and altered the early Au-bearing feldspathic alteration and introduced additional Au that was dominantly associated with pyrite. Analogous Au-only deposits such as Maricunga, Chile, La Colosa, Colombia, and Biely Vrch, Slovakia, are characterized by similar alteration styles and Au deportment. The deportment of Au in these Au-only porphyry deposits differs markedly from that in Au-rich porphyry Cu deposits where Au is typically associated with Cu sulfides.


Minerals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 125 ◽  
Author(s):  
Christopher J. Barnes ◽  
Katarzyna Walczak ◽  
Emilie Janots ◽  
David Schneider ◽  
Jarosław Majka

The Vestgӧtabreen Complex exposed in the Southwestern Caledonian Basement Province of Svalbard comprises two Caledonian high-pressure units. In situ white mica 40Ar/39Ar and monazite Th-U-total Pb geochronology has resolved the timing of the tectonic evolution of the complex. Cooling of the Upper Unit during exhumation occurred at 476 ± 2 Ma, shortly after eclogite-facies metamorphism. The two units were juxtaposed at 454 ± 6 Ma. This was followed by subaerial exposure and deposition of Bullbreen Group sediments. A 430–400 Ma late Caledonian phase of thrusting associated with major sinistral shearing throughout Svalbard deformed both the complex and the overlying sediments. This phase of thrusting is prominently recorded in the Lower Unit, and is associated with a pervasive greenschist-facies metamorphic overprint of high-pressure lithologies. A c. 365–344 Ma geochronological record may represent an Ellesmerian tectonothermal overprint. Altogether, the geochronological evolution of the Vestgӧtabreen Complex, with previous petrological and structural studies, suggests that it may be a correlative to the high-pressure Tsäkkok Lens in the Scandinavian Caledonides. It is suggested that the Vestgӧtabreen Complex escaped to the periphery of the orogen along the sinistral strike-slip shear zones prior to, or during the initial stages of continental collision between Baltica and Laurentia.


2016 ◽  
Vol 46 (4) ◽  
pp. 567-583 ◽  
Author(s):  
Manuela de Oliveira Carvalho ◽  
◽  
Claudio de Morisson Valeriano ◽  
Pamela Alejandra Aparicio González ◽  
Gustavo Diniz Oliveira ◽  
...  

ABSTRACT: Two regional thrust-sheets of Neoproterozoic metasedimentary rocks occur in the Southern Brasília Belt, northwest Minas Gerais. The lower one comprises the Vazante Group, that is formed in the studied area, from base to top, by the Serra do Garrote (metapelites interlayered with carbonaceous phyllite), Serra do Poço Verde (beige to pink stromatolitic metadolomite with interlayered greenish slates), Morro do Calcário (gray stromatolitic metadolomite interlayered with gray slates) and Serra da Lapa (phyllite with dolarenitic lenses interlayered with slates) formations. The upper thrust sheet consists of the Canastra Group (Paracatu formation): laminated sericite phyllites and carbonaceous phyllites interlayered with quartzite. The Braziliano orogeny resulted in four phases of contractional deformation, associated with low-grade metamorphism. The first two (D1 and D2) are ductile, while the third and fourth ones (D3 and D4) are brittle-ductile. D1 developed a slaty S1 cleavage subparallel to the primary layering, with shallow to steep dips to NW. D2 developed a crenulation cleavage (S2) that dips moderately to NW and is associated with tight to isoclinal folds. D3 and D4 phases developed crenulations and open folds and kink bands. S3 dips steeply to NW, while S4 has moderate to steep dips to NE and SW. White mica crystallinity (Kübler index) measurements in metapelites indicate that both the Canastra and Vazante groups reached anchizone/epizone conditions, and metamorphic discontinuities along thrusts indicate that the peak of metamorphism is pre or syn-thrusting.


Minerals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 509
Author(s):  
Pura Alfonso ◽  
Sarbast Ahmad Hamid ◽  
Hernan Anticoi ◽  
Maite Garcia-Valles ◽  
Josep Oliva ◽  
...  

The strategic importance of tantalum and its scarcity in Europe makes its recovery from low grade deposits and tailings interesting. In Penouta, the contents of Ta and Sn in old tailings from an Sn mine are of economic interest. Due to the relatively low grade of Ta of around 100 ppm, a detailed study of the mineralogy and liberation conditions is necessary. In this study, the mineralogy and the liberation characteristics of Sn and Ta ores of the Penouta tailings were investigated and compared with the current leucogranite outcropping ores. The characterization was conducted through X-ray diffraction, scanning electron microscopy, and electron microprobe. In addition, automated mineralogy techniques were used to determine the mineral associations and liberation characteristics of ore minerals. The grade of the leucogranite outcropping was found to be about 80 ppm for Ta and 400 ppm for Sn, and in the tailings used for the liberation study, the concentrations of Ta and Sn were about 100 ppm Ta and 500 ppm Sn, respectively. In both, the leucogranite outcropping and tailings, the major minerals found were quartz, albite, K-feldspar, and white mica. Ore minerals identified were columbite-group minerals (CGM), microlite, and cassiterite. The majority of CGM examined were associated with cassiterite, quartz, and muscovite particle compositions and cassiterite was mainly associated with CGM, quartz, and muscovite. The liberation size was 180 µm for CGM.


2020 ◽  
Vol 195 ◽  
pp. 105723
Author(s):  
Mª. Dolores Rodríguez-Ruiz ◽  
Isabel Abad ◽  
María Bentabol ◽  
Mª. Dolores Ruiz Cruz

1990 ◽  
Vol 127 (2) ◽  
pp. 101-116 ◽  
Author(s):  
U. Pognante ◽  
D. Castelli ◽  
P. Benna ◽  
G. Genovese ◽  
F. Oberli ◽  
...  

AbstractIn the High Himalayan belt of northwest India, crustal thickening linked to Palaeogene collision between India and Eurasia has led to the formation of two main crystalline tectonic units separated by the syn-metamorphic Miyar Thrust: the High Himalayan Crystallines sensu stricto (HHC) at the bottom, and the Kade Unit at the top. These units are structurally interposed between the underlying Lesser Himalaya and the very low-grade sediments of the Tibetan nappes. They consist of paragneisses, orthogneisses, minor metabasics and, chiefly in the HHC, leucogranites. The HHC registers: a polyphase metamorphism with two main stages designated as M1 and M2; a metamorphic zonation with high-temperature recrystallization and migmatization at middle structural levels and medium-temperature assemblages at upper and lower levels. In contrast, the Kade Unit underwent a low-temperature metamorphism. Rb–Sr and U–Th–Pb isotope data point to derivation of the orthogneisses from early Palaeozoic granitoids, while the leucogranites formed by anatexis of the HHC rocks and were probably emplaced during Miocene time.Most of the complicated metamorphic setting is related to polyphase tectonic stacking of the HHC with the ‘cooler’ Kade Unit and Lesser Himalaya during the Himalayan history. However, a few inconsistencies exist for a purely Himalayan age of some Ml assemblages of the HHC. As regards the crustal-derived leucogranites, the formation of a first generation mixed with quartzo-feldspathic leucosomes was possibly linked to melt-lubricated shear zones which favoured rapid crustal displacements; at upper levels they intruded during stage M2 and the latest movements along the syn-metamorphic Miyar Thrust, but before juxtaposition of the Tibetan nappes along the late- metamorphic Zanskar Fault.


Sign in / Sign up

Export Citation Format

Share Document