scholarly journals Absorption Spectra of Cuprous Oxide

1959 ◽  
Vol 12 ◽  
pp. 160-173 ◽  
Author(s):  
Masakazu Hayashi
2016 ◽  
Vol 93 (8) ◽  
Author(s):  
Frank Schweiner ◽  
Jörg Main ◽  
Günter Wunner

1969 ◽  
Vol 26 (1) ◽  
pp. 121-136 ◽  
Author(s):  
Masakazu Hayashi ◽  
Masahiro Ogawa

2018 ◽  
Vol 8 (1) ◽  
Author(s):  
Sergey Artyukhin ◽  
Dmitry Fishman ◽  
Clément Faugeras ◽  
Marek Potemski ◽  
Alexandre Revcolevschi ◽  
...  

1988 ◽  
Vol 102 ◽  
pp. 243-246
Author(s):  
J.T. Costello ◽  
W.G. Lynam ◽  
P.K. Carroll

AbstractThe dual laser-produced plasma technique for the study of ionic absorption spectra has been developed by the use of two Q-switched ruby lasers to enable independent generation of the absorbing and back-lighting plasmas. Optical pulse handling is used in the coupling cicuits to enable reproducible pulse delays from 250 nsec. to 10 msec, to be achieved. At delay times > 700 nsec. spectra of essentially pure neutral species are observed. The technique is valuable, not only for obtaining the neutral spectra of highly refractory and/or corrosive materials but also for studying behaviour of ionic species as a function of time. Typical spectra are shown in Fig. 1.


1988 ◽  
Vol 102 ◽  
pp. 71-73
Author(s):  
E. Jannitti ◽  
P. Nicolosi ◽  
G. Tondello

AbstractThe photoabsorption spectra of the carbon ions have been obtained by using two laser-produced plasmas. The photoionization cross-section of the CV has been absolutely measured and the value at threshold, σ=(4.7±0.5) × 10−19cm2, as well as its behaviour at higher energies agrees quite well with the theoretical calculations.


Author(s):  
Bradley L. Thiel ◽  
Chan Han R. P. ◽  
Kurosky L. C. Hutter ◽  
I. A. Aksay ◽  
Mehmet Sarikaya

The identification of extraneous phases is important in understanding of high Tc superconducting oxides. The spectroscopic techniques commonly used in determining the origin of superconductivity (such as RAMAN, XPS, AES, and EXAFS) are surface-sensitive. Hence a grain boundary phase several nanometers thick could produce irrelevant spectroscopic results and cause erroneous conclusions. The intergranular phases present a major technological consideration for practical applications. In this communication we report the identification of a Cu2O grain boundary phase which forms during the sintering of YBa2Cu3O7-x (1:2:3 compound).Samples are prepared using a mixture of Y2O3. CuO, and BaO2 powders dispersed in ethanol for complete mixing. The pellets pressed at 20,000 psi are heated to 950°C at a rate of 5°C per min, held for 1 hr, and cooled at 1°C per min to room temperature. The samples show a Tc of 91K with a transition width of 2K. In order to prevent damage, a low temperature stage is used in milling to prepare thin foils which are then observed, using a liquid nitrogen holder, in a Philips 430T at 300 kV.


1996 ◽  
Vol 88 (1) ◽  
pp. 281-290 ◽  
Author(s):  
HAO WEN ◽  
TIANJING HE ◽  
CUNYI XU ◽  
JIAN ZUO ◽  
FAN-CHEN LIU

Sign in / Sign up

Export Citation Format

Share Document