Étude expérimentale in situ des effets de la densité et de la quantité de nourriture chez le gastéropode Bithynia tentaculata (Mollusca: Prosobranchia)

1986 ◽  
Vol 64 (8) ◽  
pp. 1696-1700 ◽  
Author(s):  
Eric Gilbert ◽  
Bruno Vincent ◽  
Luc Roseberry
Keyword(s):  
Natural Environment ◽  
Adult Mortality ◽  
Adult Density ◽  
Initial Value ◽  
Bithynia Tentaculata ◽  
Two Factors ◽  
The Mean ◽  
New Generation ◽  
St Lawrence River

Experiments in a natural environment on the Gastropod Bithynia tentaculata showed that adult density and available food have significant effects on the growth of smaller adults and newborns. Mean length of the new generation at the end of the experiment incresed as adult densities decreased from the initial value and as food abundance increased. The only case of interaction between these two factors can be explained by an increase in the number of young brought about by the addition of food when density was low and by the influence of the density of these young on their growth. Different combinations of density and food can produce the various types of length–frequency histograms observed in a natural environment and during the past 8 years in the St. Lawrence River. There was no significant correlation between these two factors and the adult mortality rate, but density did have a significant effect on the mean number of young per adult.[Journal translation]

Cycle de développement, croissance et production de Pisidium amnicum (Mollusca: Bivalvia) dans le Saint-Laurent (Québec)

1981 ◽  
Vol 59 (12) ◽  
pp. 2350-2359 ◽  
Author(s):  
B. Vincent ◽  
G. Vaillancourt ◽  
N. Lafontaine
Keyword(s):  
Population Dynamics ◽  
Sexual Maturity ◽  
Dry Weight ◽  
Mortality Rates ◽  
The Other ◽  
Annual Production ◽  
Bithynia Tentaculata ◽  
The Mean ◽  
Total Dry Weight ◽  
St Lawrence River

The population dynamics of Pisidium amnicum have been studied in one population of the St. Lawrence River over a 2-year period during which 19 samples were taken. The species can live up to 3 years and it is iteroparous; individuals generally attain sexual maturity after 1 year and they reproduce twice, once at 2 and once at 3 years of age. In adults, mortality is lower in winter than during the rest of the year and mortality rates are twice as high during the 1st year than during the 2nd year. Total dry weight (PT, in milligrams) is related to maximum length (L, in millimetres) according to the equation PT = 0.0283∙L3,80 and flesh dry weight (PC, in milligrams) is related to length as follows: PC = 0.007∙L3,18. The annual production to mean biomass (P/B) ratio is 1.4, the mean annual production being 1.298 mg/m2 of total dry weight and 107 mg/m2 of flesh weight. Comparing these results with those obtained for the gastropod Bithynia tentaculata in the same environment and at the same period of the year has shown that the growth of Pisidium amnicum is far less influenced by the temperature regime than that of the other species and that its production is at least 10 times lower.

A Paradigm for the study of insect-ciliate Relationships: Tetrahymena sialidos sp. nov. (Hymenostomatida: Tetrahymenidae), Parasite of Larval Sialis Lutaria (Linn.) (Megaloptera: Sialidae)

1985 ◽  
Vol 310 (1143) ◽  
pp. 123-144 ◽  
Keyword(s):  
Host Population ◽  
Insect Immunity ◽  
Survival Strategies ◽  
Infected Host ◽  
Parasitic Infections ◽  
Morphological Transformation ◽  
Physical Damage ◽  
The Mean ◽  
New Generation

A new species of hymenostome ciliate, Tetrahymena sialidos sp.nov., is described and proposed as a model for studies upon insect-ciliate interactions. This ciliate occurs as a parasite in the haemocoel of larval Sialis lutaria (Megaloptera) and exhibits field and laboratory characteristics favourable for two particular areas of study, the regulation of invertebrate populations by parasites and insect immunity to parasitic infections. The prevalence of T. sialidos infection in S. lutaria from a small lake in mid-Wales has been monitored during a four-year period. Each summer, early in the first of their two-year aquatic development, 40-70% of S. lutaria larvae become infected. Death of infected larvae due to parasite proliferation is inevitable but does not occur until 11-12 months after infection, when the mean intensity has reached 55000 ciliates per infected host. Ciliates escaping from moribund or dead host larvae undergo a distinct morphological transformation followed by a period of synchronous conjugation. Death of infected host larvae and release of ciliates coincides with the appearance of a new generation of host larvae in which the prevalence of infection rises rapidly. The possible significance of this substantial and persistent regulatory influence upon host population dynamics is discussed in relation to current ideas of parasite regulation of invertebrate populations. Sialis lutaria is not able normally to mount a successful host response against T. sialidos infections. A laboratory thermalshock technique is described by means of which parasitic ciliates may be killed in situ without incurring physical damage to the host. Infected larvae subjected to thermalshock at 39 °C for 1 h subsequently encapsulate and melanize the dead ciliates. The use of this technique is discussed in relation to recognition of non-self in insects and survival strategies of parasites infecting insects.

Penerapan Rinfo Sebagai Media Pendukung Untuk Proses Pembelajaran Pada Perguruan Tinggi Raharja

CCIT Journal ◽  
2014 ◽  
Vol 8 (1) ◽  
pp. 101-115
Author(s):  
Untung Rahardja ◽  
Khanna Tiara ◽  
Ray Indra Taufik Wijaya
Keyword(s):  
Learning Process ◽  
Human Life ◽  
Learning Tools ◽  
Integrated Learning ◽  
Civilizing Process ◽  
The World ◽  
The Future ◽  
Two Factors ◽  
Life Education ◽  
New Generation

Education is an important factor in human life. According to Ki Hajar Dewantara, education is a civilizing process that a business gives high values ??to the new generation in a society that is not only maintenance but also with a view to promote and develop the culture of the nobility toward human life. Education is a human investment that can be used now and in the future. One other important factor in supporting human life in addition to education, which is technology. In this globalization era, technology has touched every joint of human life. The combination of these two factors will be a new innovation in the world of education. The innovation has been implemented by Raharja College, namely the use of the method iLearning (Integrated Learning) in the learning process. Where such learning has been online based. ILearning method consists of TPI (Ten Pillars of IT iLearning). Rinfo is one of the ten pillars, where it became an official email used by the whole community’s in Raharja College to communicate with each other. Rinfo is Gmail, which is adapted from the Google platform with typical raharja.info as its domain. This Rinfo is a medium of communication, as well as a tool to support the learning process in Raharja College. Because in addition to integrated with TPi, this Rinfo was connected also support with other learning tools, such as Docs, Drive, Sites, and other supporting tools.

Novel Formulation Development and Evaluation of Nanoparticles Based in Situ Gelling System for The Ophthalmic Delivery of Ciprofloxacin Hydrochloride

2015 ◽  
Vol 5 (4) ◽  
Author(s):  
Kranti Singh ◽  
Surajpal Verma ◽  
Shyam Prasad ◽  
Indu Bala
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Drug Loading ◽  
In Vitro Release ◽  
Formulation Development ◽  
Ciprofloxacin Hydrochloride ◽  
Potential Value ◽  
The Mean ◽  
In Situ Gelling

Ciprofloxacin hydrochloride loaded Eudragit RS100 nanoparticles were prepared by using w/o/w emulsification (multiple emulsification) solvent evaporation followed by drying of nanoparticles at 50°C. The nanoparticles were further incorporated into the pH-triggered in situ gel forming system which was prepared using Carbopol 940 in combination with HPMC as viscosifying agent. The developed nanoparticles was evaluated for particle size, zeta potential value and loading efficiency; nanoparticle incorporated in situ gelling system was evaluated for pH, clarity, gelling strength, rheological studies, in-vitro release studies and ex-vivo precorneal permeation studies. The nanopaticle showed the mean particle size varying between 263.5nm - 325.9 nm with the mean zeta potential value of -5.91 mV to -8.13 mV and drug loading capacity varied individually between 72.50% to 98.70% w/w. The formulation was clear with no suspended particles, showed good gelling properties. The gelling was quick and remained for longer time period. The developed formulation was therapeutically efficacious, stable and non-irritant. It provided the sustained release of drug over a period of 8-10 hours.

scholarly journals Electrical stimulator with mechanomyography-based real-time monitoring, muscle fatigue detection, and safety shut-off: a pilot study

2020 ◽  
Vol 65 (4) ◽  
pp. 461-468
Author(s):  
Jannatul Naeem ◽  
Nur Azah Hamzaid ◽  
Amelia Wong Azman ◽  
Manfred Bijak
Keyword(s):  
Muscle Fatigue ◽  
Real Time ◽  
Isometric Force ◽  
Mean Square ◽  
Clear Indication ◽  
Initial Value ◽  
Cord Injury ◽  
The Mean ◽  
Electrical Stimulator ◽  
Fatigue Detection

AbstractFunctional electrical stimulation (FES) has been used to produce force-related activities on the paralyzed muscle among spinal cord injury (SCI) individuals. Early muscle fatigue is an issue in all FES applications. If not properly monitored, overstimulation can occur, which can lead to muscle damage. A real-time mechanomyography (MMG)-based FES system was implemented on the quadriceps muscles of three individuals with SCI to generate an isometric force on both legs. Three threshold drop levels of MMG-root mean square (MMG-RMS) feature (thr50, thr60, and thr70; representing 50%, 60%, and 70% drop from initial MMG-RMS values, respectively) were used to terminate the stimulation session. The mean stimulation time increased when the MMG-RMS drop threshold increased (thr50: 22.7 s, thr60: 25.7 s, and thr70: 27.3 s), indicating longer sessions when lower performance drop was allowed. Moreover, at thr70, the torque dropped below 50% from the initial value in 14 trials, more than at thr50 and thr60. This is a clear indication of muscle fatigue detection using the MMG-RMS value. The stimulation time at thr70 was significantly longer (p = 0.013) than that at thr50. The results demonstrated that a real-time MMG-based FES monitoring system has the potential to prevent the onset of critical muscle fatigue in individuals with SCI in prolonged FES sessions.

scholarly journals On Riemann—Liouville and Caputo Fractional Forward Difference Monotonicity Analysis

Mathematics ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 1303
Author(s):  
Pshtiwan Othman Mohammed ◽  
Thabet Abdeljawad ◽  
Faraidun Kadir Hamasalh
Keyword(s):  
Time Scale ◽  
Initial Value Problems ◽  
Mean Value ◽  
Mean Value Theorem ◽  
Discrete Fractional Calculus ◽  
Initial Value ◽  
Forward Difference ◽  
The Mean ◽  
Monotonicity Analysis ◽  
Monotonicity Results

Monotonicity analysis of delta fractional sums and differences of order υ∈(0,1] on the time scale hZ are presented in this study. For this analysis, two models of discrete fractional calculus, Riemann–Liouville and Caputo, are considered. There is a relationship between the delta Riemann–Liouville fractional h-difference and delta Caputo fractional h-differences, which we find in this study. Therefore, after we solve one, we can apply the same method to the other one due to their correlation. We show that y(z) is υ-increasing on Ma+υh,h, where the delta Riemann–Liouville fractional h-difference of order υ of a function y(z) starting at a+υh is greater or equal to zero, and then, we can show that y(z) is υ-increasing on Ma+υh,h, where the delta Caputo fractional h-difference of order υ of a function y(z) starting at a+υh is greater or equal to −1Γ(1−υ)(z−(a+υh))h(−υ)y(a+υh) for each z∈Ma+h,h. Conversely, if y(a+υh) is greater or equal to zero and y(z) is increasing on Ma+υh,h, we show that the delta Riemann–Liouville fractional h-difference of order υ of a function y(z) starting at a+υh is greater or equal to zero, and consequently, we can show that the delta Caputo fractional h-difference of order υ of a function y(z) starting at a+υh is greater or equal to −1Γ(1−υ)(z−(a+υh))h(−υ)y(a+υh) on Ma,h. Furthermore, we consider some related results for strictly increasing, decreasing, and strictly decreasing cases. Finally, the fractional forward difference initial value problems and their solutions are investigated to test the mean value theorem on the time scale hZ utilizing the monotonicity results.

scholarly journals In-Situ Synthesis of TiO2@GO Nanosheets for Polymers Degradation in a Natural Environment

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2158
Author(s):  
Yueqin Shi ◽  
Zhanyang Yu ◽  
Zhengjun Li ◽  
Xiaodong Zhao ◽  
Yongjun Yuan
Keyword(s):  
Natural Environment ◽  
New Technologies ◽  
Separation Efficiency ◽  
Basic Mechanism ◽  
Chemical Degradation ◽  
Natural Environments ◽  
Additional Energy ◽  
Photogenerated Electrons ◽  
Main Components

Plastic photodegradation naturally takes 300–500 years, and their chemical degradation typically needs additional energy or causes secondary pollution. The main components of global plastic are polymers. Hence, new technologies are urgently required for the effective decomposition of the polymers in natural environments, which lays the foundation for this study on future plastic degradation. This study synthesizes the in-situ growth of TiO2 at graphene oxide (GO) matrix to form the TiO2@GO photocatalyst, and studies its application in conjugated polymers’ photodegradation. The photodegradation process could be probed by UV-vis absorption originating from the conjugated backbone of polymers. We have found that the complete decomposition of various polymers in a natural environment by employing the photocatalyst TiO2@GO within 12 days. It is obvious that the TiO2@GO shows a higher photocatalyst activity than the TiO2, due to the higher crystallinity morphology and smaller size of TiO2, and the faster transmission of photogenerated electrons from TiO2 to GO. The stronger fluorescence (FL) intensity of TiO2@GO compared to TiO2 at the terephthalic acid aqueous solution indicates that more hydroxyl radicals (•OH) are produced for TiO2@GO. This further confirms that the GO could effectively decrease the generation of recombination centers, enhance the separation efficiency of photoinduced electrons and holes, and increase the photocatalytic activity of TiO2@GO. This work establishes the underlying basic mechanism of polymers photodegradation, which might open new avenues for simultaneously addressing the white pollution crisis in a natural environment.

scholarly journals Investigation of dominant traveling 10-day wave components using long-term MERRA-2 database

2021 ◽  
Vol 73 (1) ◽  
Author(s):  
Chunming Huang ◽  
Wei Li ◽  
Shaodong Zhang ◽  
Gang Chen ◽  
Kaiming Huang ◽  
...  
Keyword(s):  
Flow Instability ◽  
Transmission Condition ◽  
Wave Number ◽  
Mean Flow ◽  
Excited Wave ◽  
Propagating Waves ◽  
Zonal Wave Number ◽  
The Mean

AbstractThe eastward- and westward-traveling 10-day waves with zonal wavenumbers up to 6 from surface to the middle mesosphere during the recent 12 years from 2007 to 2018 are deduced from MERRA-2 data. On the basis of climatology study, the westward-propagating wave with zonal wave number 1 (W1) and eastward-propagating waves with zonal wave numbers 1 (E1) and 2 (E2) are identified as the dominant traveling ones. They are all active at mid- and high-latitudes above the troposphere and display notable month-to-month variations. The W1 and E2 waves are strong in the NH from December to March and in the SH from June to October, respectively, while the E1 wave is active in the SH from August to October and also in the NH from December to February. Further case study on E1 and E2 waves shows that their latitude–altitude structures are dependent on the transmission condition of the background atmosphere. The presence of these two waves in the stratosphere and mesosphere might have originated from the downward-propagating wave excited in the mesosphere by the mean flow instability, the upward-propagating wave from the troposphere, and/or in situ excited wave in the stratosphere. The two eastward waves can exert strong zonal forcing on the mean flow in the stratosphere and mesosphere in specific periods. Compared with E2 wave, the dramatic forcing from the E1 waves is located in the poleward regions.

Estimating Global Ocean Heat Content Changes in the Upper 1800 m since 1950 and the Influence of Climatology Choice*

2014 ◽  
Vol 27 (5) ◽  
pp. 1945-1957 ◽  
Author(s):  
John M. Lyman ◽  
Gregory C. Johnson
Keyword(s):  
Heat Content ◽  
Ocean Heat Content ◽  
Global Ocean ◽  
Ocean Temperature ◽  
Vertical Separation ◽  
Ocean Heat Uptake ◽  
Expendable Bathythermograph ◽  
Heat Uptake ◽  
The Mean

Abstract Ocean heat content anomalies are analyzed from 1950 to 2011 in five distinct depth layers (0–100, 100–300, 300–700, 700–900, and 900–1800 m). These layers correspond to historic increases in common maximum sampling depths of ocean temperature measurements with time, as different instruments—mechanical bathythermograph (MBT), shallow expendable bathythermograph (XBT), deep XBT, early sometimes shallower Argo profiling floats, and recent Argo floats capable of worldwide sampling to 2000 m—have come into widespread use. This vertical separation of maps allows computation of annual ocean heat content anomalies and their sampling uncertainties back to 1950 while taking account of in situ sampling advances and changing sampling patterns. The 0–100-m layer is measured over 50% of the globe annually starting in 1956, the 100–300-m layer starting in 1967, the 300–700-m layer starting in 1983, and the deepest two layers considered here starting in 2003 and 2004, during the implementation of Argo. Furthermore, global ocean heat uptake estimates since 1950 depend strongly on assumptions made concerning changes in undersampled or unsampled ocean regions. If unsampled areas are assumed to have zero anomalies and are included in the global integrals, the choice of climatological reference from which anomalies are estimated can strongly influence the global integral values and their trend: the sparser the sampling and the bigger the mean difference between climatological and actual values, the larger the influence.

Chemical characteristics and in situ ruminal parameters of barley for cattle: Comparison of the malting cultivar AC Metcalfe and five feed cultivars

2008 ◽  
Vol 88 (4) ◽  
pp. 711-719 ◽  
Author(s):  
Kenton J Hart ◽  
Brian G Rossnagel ◽  
Peiqiang Yu
Keyword(s):  
Nutritive Value ◽  
Degradation Kinetics ◽  
Starch Degradation ◽  
Barley Cultivars ◽  
Degradation Rates ◽  
Key Words Barley ◽  
In Situ Degradation ◽  
The Mean ◽  
Pass Through

The objective of this study was to compare the most widely grown barley cultivar in Canada, AC Metcalfe, a malting type barley, with five feed cultivars. Barley cultivars were grown at one location during 3 consecutive years and barley samples were milled to pass through a 1-mm screen and analysed to determine nutritive value. Additional samples were passed through a roller mill with a gap set at 1.12 mm and incubated ruminally for 0, 2, 4, 8, 12, 24, and 48 h in 3 dry Holstein cows fitted with rumen cannulae. The rate and extent of rumen digestion were estimated. AC Metcalfe had a higher (P < 0.001) concentration of NDF, and lower (P < 0.05) concentrations of non structural carbohydrates, starch, ADF, total digestible nutrients, and fermentable cell wall carbohydrates compared with the mean of the feed cultivars. The malting cultivar had a higher (P < 0.001) soluble DM fraction, lower (P < 0.05) CP and starch degradation rates, and a lower (P < 0.001) ruminally degradable starch concentration compared with the mean of the five feed cultivars. The results demonstrate that there are only small differences in terms of chemical composition and in situ degradation kinetics between the malting cultivar AC Metcalfe and the five feed cultivars of barley reported here. Key words: Barley, energy, protein, ruminants

Sign in / Sign up

Export Citation Format

Share Document