Life cycles and drift of Trichoptera from a woodland stream in Minnesota

1984 ◽  
Vol 62 (8) ◽  
pp. 1479-1484 ◽  
Author(s):  
Charles C. Krueger ◽  
Edwin F. Cook
Keyword(s):  
Life Cycle ◽  
Adult Emergence ◽  
Life Cycles ◽  
Frequency Distributions ◽  
Summer Generation ◽  
Size Frequency ◽  
Clear Association ◽  
Standing Stocks ◽  
Stream Drift

Life cycles of Trichoptera from a stream riffle were determined from analyses of monthly size–frequency distributions of larvae, pupal densities, and observations of adult emergence. Two types of univoltine life cycles were observed (H. B. N. Hynes' classification): slow seasonal for Brachycentrus americanus, Brachycentrus occidentalism and Micrasema kluane, and fast seasonal for Lepidostoma bryanti. The life cycle for Glossosoma intermedium was primarily bivoltine with summer and winter generations; however, some larvae of the summer generation were suspected to overwinter as pupae or terminal instar larvae and emerge in the spring. Larval B. americanus and L. bryanti showed peak drift prior to pupation and emergence which thus appeared seasonally associated with life cycle. Stream drift of M. kluane and G. intermedium was low and exhibited no clear association with life cycle or season. Drift of B. americanus, M. kluane, L. bryanti, and G. intermedium was not correlated to standing stocks (p < 0.05).

Life history, secondary production and population dynamics of Gammarus fossarum (Koch, 1836) in a constant temperature stream

Biologia ◽  
2012 ◽  
Vol 67 (1) ◽  
Author(s):  
Pavel Beracko ◽  
Anna Sýkorová ◽  
Andrej Štangler
Keyword(s):  
Life Cycle ◽  
Constant Temperature ◽  
Growth Function ◽  
Dry Mass ◽  
Frequency Method ◽  
Daily Growth ◽  
Gammarus Fossarum ◽  
Frequency Distributions ◽  
Size Frequency ◽  
The Mean

AbstractPopulation of the freshwater amphipod Gammarus fossarum was investigated in a calcareous stream with almost constant temperature (7–8°C) in the Chočské Vrchy Mts (West Carpathians, Slovakia). Quantitative samples of G. fossarum taken during 2005 showed population densities varying from 100 m−2 in August to 585 m−2 in late November. The population was split into juveniles, mature males, mature females without eggs and females with eggs. The percentage of juveniles (40–64%) was always the highest of any of the categories. Ovigerous females occurred throughout the year. The mean sex ratio was 1: 2.4 (male: female), although its values varied considerably with the time of year. Breeding was continuous, although juvenile recruitment peaked in early spring, summer and early winter. Three discrete cohorts were distinguished from the size frequency distributions. The life span was 6–7 months and the individuals matured approximately in the half of life cycle. The mean fecundity was 9.6 embryos per brood. Variation in fecundity was mostly explained by size of the incubating females. The absolute growth of this species was best described by the Gompertz growth function. Relative growth rates (% body DM day−1) fluctuated in a nonlinear manner with size and age. The highest values of daily growth (2–4% of dry mass per day) were noted approximately in the half of life cycle. Annual production, estimated by the size-frequency method, was 1618.9 g dry mass m−2 and P/B ratio was 5.15.

Life history and microdistribution of Neureclipsis bimaculata (Trichoptera: Polycentropodidae) in a lake outflow stream of Alberta, Canada

1983 ◽  
Vol 61 (11) ◽  
pp. 2434-2445 ◽  
Author(s):  
John S. Richardson ◽  
Hugh F. Clifford
Keyword(s):  
Life History ◽  
Life Cycle ◽  
Aquatic Macrophytes ◽  
Adult Emergence ◽  
Dry Mass ◽  
Degree Days ◽  
Summer Generation ◽  
Two Generations ◽  
Major Structural Component ◽  
Sand Bottom

A population of Neureclipsis bimaculata was studied from November 1980 to September 1982. The life cycle was bivoltine during both years. Development was direct and the population overwintered as larvae. The summer generation took only 6 to 7 weeks to complete, while the winter generation took the remainder of the year. Adult emergence took place from late May to early September, with two distinct peaks corresponding to the two generations. In both years summer generation larvae and adults were much more numerous than the winter generation. Production of this population (both generations) was estimated at 3.43 g∙m−2∙year−1 (ash free dry mass). The type and abundance of aquatic macrophytes influenced larval microdistribution by acting as a substratum for the large capture nets of larvae. Potamogeton richardsonii and Equisetum were important substrata in summer. In winter, Chara was an important substratum, since it was the only major structural component on the mud-sand bottom during that season. Maintenance of capture nets was seasonal (May to September or early October) and appeared to be related to temperature. Cumulative degree-days were not sufficient to account for apparent differences in voltinism between populations; these differences may be a function of food supply, which in part is related to the productivity of the water body.

MERGERS AND ACQUISITIONS AND THEIR CORRELATION WITH THE LIFE CYCLES OF MEMBER COMPANIES ON THE EXAMPLE OF THE RUSSIAN MARKET 2017–2019

2020 ◽  
Vol 1 (10) ◽  
pp. 26-35
Author(s):  
E. A. SHUBINA ◽  
◽  
Yu. A. KOMAROVSKY ◽  
A. V. MERKUSHEV ◽  
◽  
...  
Keyword(s):  
Life Cycle ◽  
Mergers And Acquisitions ◽  
Life Cycles ◽  
Russian Market

The article is devoted to the study of the largest mergers and acquisitions (M&A, “Mergers & Acquisitions”) in Russia for 2017–2019. (the acquired block of shares is not less than 99%). The concept of life cycles of organizations and theoretical aspects of mergers and acquisitions are described. The stages of the life cycle of the merged and reorganized companies, the goals of mergers and acquisitions, depending on the stages of the life cycle are analyzed.

Life cycle of self-propelled machinery with waste generation at its disposal

2020 ◽  
pp. 28-35
Author(s):  
Valeriy S. Gerasimov ◽  
Vladimir I. Ignatov ◽  
Konstantin G. Sovin
Keyword(s):  
Life Cycle ◽  
Life Cycles ◽  
The State ◽  
Research Purpose ◽  
Industrial Complex ◽  
Agricultural Machinery ◽  
Resource Saving ◽  
Secondary Resources ◽  
Branch System ◽  
Additional Funding

According to forecasts for 2022, the number of self-propelled agricultural machinery that will fail will be about 100 thousand units. This will have a significant impact on the overall productivity in the field of agricultural production and will require additional financial costs for effective resource-saving environmental-oriented utilization of agricultural machinery with the maximum recovery of secondary resources in the processing of its components. (Research purpose) The research purpose is considering the main life cycles of machinery, including agricultural, and determining the possibility of obtaining secondary resources in the recycling of components of machinery and equipment. (Materials and methods) The authors found that the establishment of an industry-wide recycling system would allow the reuse of usable and recovered parts obtained from decommissioned equipment, as well as receive additional funding from the sale of secondary resources. The authors have found that for the functioning of the whole system, it is necessary to work with a large amount of data related to the ongoing recycling processes, as well as constantly monitor changes in the state and properties of materials. They also found that the maximum use of digital technology is the only way to combine all these requirements and make the system work. (Results and discussion) The article reviews the key points of the use of life cycle method for equipment, including agricultural, reviews the state of machine and tractor park of agro-industrial complex, shows the possibility of using resource-saving ecologically oriented branch system of recycling of agricultural machinery, as well as the movement of waste and material flows in the processing components of utilized machines. (Conclusion) The article presents recommendations on the possibility of efficient disposal of equipment, including agricultural, with the maximum recovery of secondary resources from recycled waste.

Life cycles of the rhizocephalan Boschmaella japonica Deichmann & Høeg, 1990 (Cirripedia: Chthamalophilidae) and its host barnacle Chthamalus challengeri Hoek, 1883 (Cirripedia: Chthamalidae)

2020 ◽  
Vol 40 (6) ◽  
pp. 825-832 ◽  
Author(s):  
Miku Yabuta ◽  
Jens T Høeg ◽  
Shigeyuki Yamato ◽  
Yoichi Yusa
Keyword(s):  
Life Cycle ◽  
Brood Size ◽  
Life Cycles ◽  
The Body ◽  
Egg Volume ◽  
Size Number ◽  
Rhizocephalan Barnacles ◽  
Western Japan ◽  
Upper Intertidal ◽  
Chthamalus Challengeri

Abstract Although parasitic castration is widespread among rhizocephalan barnacles, Boschmaella japonica Deichmann & Høeg, 1990 does not completely sterilise the host barnacle Chthamalus challengeri Hoek, 1883. As little information is available on the relationships with the host in “barnacle-infesting parasitic barnacles” (family Chthamalophilidae), we studied the life cycles of both B. japonica and C. challengeri and the effects of the parasite on the host reproduction. Specimens of C. challengeri were collected from an upper intertidal shore at Shirahama, Wakayama, western Japan from April 2017 to September 2018 at 1–3 mo intervals. We recorded the body size, number of eggs, egg volume, and the presence of the parasite for each host. Moreover, settlement and growth of C. challengeri were followed in two fixed quadrats. Chthamalus challengeri brooded from February to June. The prevalence of B. japonica was high (often exceeded 10%) from April to July, and was rarely observed from September to next spring. The life cycle of the parasite matched well with that of the host. The parasite reduced the host’s brooding rate and brood size, to the extent that no hosts brooded in 2018.

scholarly journals Linking population size structure, heat stress and bleaching responses in a subtropical endemic coral

Coral Reefs ◽  
2021 ◽  
Author(s):  
Liam Lachs ◽  
Brigitte Sommer ◽  
James Cant ◽  
Jessica M. Hodge ◽  
Hamish A. Malcolm ◽  
...  
Keyword(s):  
Heat Stress ◽  
Size Structure ◽  
Temporal Trends ◽  
Early Recovery ◽  
Size Frequency Distribution ◽  
Frequency Distributions ◽  
Community Organisation ◽  
Size Frequency ◽  
Eastern Australia

AbstractAnthropocene coral reefs are faced with increasingly severe marine heatwaves and mass coral bleaching mortality events. The ensuing demographic changes to coral assemblages can have long-term impacts on reef community organisation. Thus, understanding the dynamics of subtropical scleractinian coral populations is essential to predict their recovery or extinction post-disturbance. Here we present a 10-yr demographic assessment of a subtropical endemic coral, Pocillopora aliciae (Schmidt-Roach et al. in Zootaxa 3626:576–582, 2013) from the Solitary Islands Marine Park, eastern Australia, paired with long-term temperature records. These coral populations are regularly affected by storms, undergo seasonal thermal variability, and are increasingly impacted by severe marine heatwaves. We examined the demographic processes governing the persistence of these populations using inference from size-frequency distributions based on log-transformed planar area measurements of 7196 coral colonies. Specifically, the size-frequency distribution mean, coefficient of variation, skewness, kurtosis, and coral density were applied to describe population dynamics. Generalised Linear Mixed Effects Models were used to determine temporal trends and test demographic responses to heat stress. Temporal variation in size-frequency distributions revealed various population processes, from recruitment pulses and cohort growth, to bleaching impacts and temperature dependencies. Sporadic recruitment pulses likely support population persistence, illustrated in 2010 by strong positively skewed size-frequency distributions and the highest density of juvenile corals measured during the study. Increasing mean colony size over the following 6 yr indicates further cohort growth of these recruits. Severe heat stress in 2016 resulted in mass bleaching mortality and a 51% decline in coral density. Moderate heat stress in the following years was associated with suppressed P. aliciae recruitment and a lack of early recovery, marked by an exponential decrease of juvenile density (i.e. recruitment) with increasing heat stress. Here, population reliance on sporadic recruitment and susceptibility to heat stress underpin the vulnerability of subtropical coral assemblages to climate change.

scholarly journals Advances of 2nd Life Applications for Lithium Ion Batteries from Electric Vehicles Based on Energy Demand

2021 ◽  
Vol 13 (10) ◽  
pp. 5726
Author(s):  
Aleksandra Wewer ◽  
Pinar Bilge ◽  
Franz Dietrich
Keyword(s):  
Life Cycle ◽  
Lithium Ion Batteries ◽  
Electric Vehicles ◽  
Energy Demand ◽  
Lithium Ion ◽  
Life Cycles ◽  
Future Research ◽  
Research Areas ◽  
Study Results ◽  
The Impact

Electromobility is a new approach to the reduction of CO2 emissions and the deceleration of global warming. Its environmental impacts are often compared to traditional mobility solutions based on gasoline or diesel engines. The comparison pertains mostly to the single life cycle of a battery. The impact of multiple life cycles remains an important, and yet unanswered, question. The aim of this paper is to demonstrate advances of 2nd life applications for lithium ion batteries from electric vehicles based on their energy demand. Therefore, it highlights the limitations of a conventional life cycle analysis (LCA) and presents a supplementary method of analysis by providing the design and results of a meta study on the environmental impact of lithium ion batteries. The study focuses on energy demand, and investigates its total impact for different cases considering 2nd life applications such as (C1) material recycling, (C2) repurposing and (C3) reuse. Required reprocessing methods such as remanufacturing of batteries lie at the basis of these 2nd life applications. Batteries are used in their 2nd lives for stationary energy storage (C2, repurpose) and electric vehicles (C3, reuse). The study results confirm that both of these 2nd life applications require less energy than the recycling of batteries at the end of their first life and the production of new batteries. The paper concludes by identifying future research areas in order to generate precise forecasts for 2nd life applications and their industrial dissemination.

scholarly journals Life Cycle Assessment of Households in Santiago, Chile: Environmental Hotspots and Policy Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2525
Author(s):  
Camila López-Eccher ◽  
Elizabeth Garrido-Ramírez ◽  
Iván Franchi-Arzola ◽  
Edmundo Muñoz
Keyword(s):  
Global Warming ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Food Consumption ◽  
Household Income ◽  
Resource Scarcity ◽  
Life Cycles ◽  
The Impact ◽  
Freshwater Eutrophication

The aim of this study is to assess the environmental impacts of household life cycles in Santiago, Chile, by household income level. The assessment considered scenarios associated with environmental policies. The life cycle assessment was cradle-to-grave, and the functional unit considered all the materials and energy required to meet an inhabitant’s needs for one year (1 inh/year). Using SimaPro 9.1 software, the Recipe Midpoint (H) methodology was used. The impact categories selected were global warming, fine particulate matter formation, terrestrial acidification, freshwater eutrophication, freshwater ecotoxicity, mineral resource scarcity, and fossil resource scarcity. The inventory was carried out through the application of 300 household surveys and secondary information. The main environmental sources of households were determined to be food consumption, transport, and electricity. Food consumption is the main source, responsible for 33% of the environmental impacts on global warming, 69% on terrestrial acidification, and 29% on freshwater eutrophication. The second most crucial environmental hotspot is private transport, whose contribution to environmental impact increases as household income rises, while public transport impact increases in the opposite direction. In this sense, both positive and negative environmental effects can be generated by policies. Therefore, life-cycle environmental impacts, the synergy between policies, and households’ socio-economic characteristics must be considered in public policy planning and consumer decisions.

scholarly journals The life-cycle of the avian haemosporidian parasite Haemoproteus majoris, with emphasis on the exoerythrocytic and sporogonic development

2019 ◽  
Vol 12 (1) ◽  
Author(s):  
Mikas Ilgūnas ◽  
Carolina Romeiro Fernandes Chagas ◽  
Dovilė Bukauskaitė ◽  
Rasa Bernotienė ◽  
Tatjana Iezhova ◽  
...  
Keyword(s):  
Phylogenetic Analysis ◽  
Life Cycle ◽  
Dna Sequences ◽  
Parus Major ◽  
Life Cycles ◽  
Internal Organs ◽  
Haemosporidian Parasite ◽  
Biting Midges ◽  
Vector Identity ◽  
Bayesian Phylogeny

Abstract Background Haemoproteus parasites (Haemosporida, Haemoproteidae) are cosmopolitan in birds and recent molecular studies indicate enormous genetic diversity of these pathogens, which cause diseases in non-adapted avian hosts. However, life-cycles remain unknown for the majority of Haemoproteus species. Information on their exoerythrocytic development is particularly fragmental and controversial. This study aimed to gain new knowledge on life-cycle of the widespread blood parasite Haemoproteus majoris. Methods Turdus pilaris and Parus major naturally infected with lineages hPHYBOR04 and hPARUS1 of H. majoris, respectively, were wild-caught and the parasites were identified using microscopic examination of gametocytes and PCR-based testing. Bayesian phylogeny was used to determine relationships between H. majoris lineages. Exoerythrocytic stages (megalomeronts) were reported using histological examination and laser microdissection was applied to isolate single megalomeronts for genetic analysis. Culicoides impunctatus biting midges were experimentally exposed in order to follow sporogonic development of the lineage hPHYBOR04. Results Gametocytes of the lineage hPHYBOR04 are indistinguishable from those of the widespread lineage hPARUS1 of H. majoris, indicating that both of these lineages belong to the H. majoris group. Phylogenetic analysis supported this conclusion. Sporogony of the lineage hPHYBOR04 was completed in C. impunctatus biting midges. Morphologically similar megalomeronts were reported in internal organs of both avian hosts. These were big roundish bodies (up to 360 μm in diameter) surrounded by a thick capsule-like wall and containing irregularly shaped cytomeres, in which numerous merozoites developed. DNA sequences obtained from single isolated megalomeronts confirmed the identification of H. majoris. Conclusions Phylogenetic analysis identified a group of closely related H. majoris lineages, two of which are characterized not only by morphologically identical blood stages, but also complete sporogonic development in C. impunctatus and development of morphologically similar megalomeronts. It is probable that other lineages belonging to the same group would bear the same characters and phylogenies based on partial cytb gene could be used to predict life-cycle features in avian haemoproteids including vector identity and patterns of exoerythrocytic merogony. This study reports morphologically unique megalomeronts in naturally infected birds and calls for research on exoerythrocytic development of haemoproteids to better understand pathologies caused in avian hosts.

Study on life-cycle design for the post mass production paradigm

2000 ◽  
Vol 14 (2) ◽  
pp. 149-161 ◽  
Author(s):  
YASUSHI UMEDA ◽  
AKIRA NONOMURA ◽  
TETSUO TOMIYAMA
Keyword(s):  
Life Cycle ◽  
Mass Production ◽  
Product Life Cycle ◽  
Knowledge Bases ◽  
Life Cycles ◽  
Simulation System ◽  
Product Life ◽  
Cycle Simulation ◽  
Life Cycle Design ◽  
Modular Structures

Environmental issues require a new manufacturing paradigm because the current mass production and mass consumption paradigm inevitably cause them. We have already proposed a new manufacturing paradigm called the “Post Mass Production Paradigm (PMPP)” that advocates sustainable production by decoupling economic growth from material and energy consumption. To realize PMPP, appropriate planning of a product life cycle (design of life cycle) is indispensable in addition to the traditional environmental conscious design methodologies. For supporting the design of a life cycle, this paper proposes a life-cycle simulation system that consists of a life-cycle simulator, an optimizer, a model editor, and knowledge bases. The simulation system evaluates product life cycles from an integrated view of environmental consciousness and economic profitability and optimizes the life cycles. A case study with the simulation system illustrates that the environmental impacts can be reduced drastically without decreasing corporate profits by appropriately combining maintenance, reuse and recycling, and by taking into consideration that optimized modular structures differ according to life-cycle options.

Sign in / Sign up

Export Citation Format

Share Document