The Membrane Binding of Morphine, Diphenylhydantoin, and Tetrahydrocannabinol

1972 ◽  
Vol 50 (12) ◽  
pp. 1193-1200 ◽  
Author(s):  
P. Seeman ◽  
M. Chau-Wong ◽  
S. Moyyen
Keyword(s):  
Ionic Strength ◽  
Partition Coefficient ◽  
Binding Sites ◽  
High Ionic Strength ◽  
Erythrocyte Membranes ◽  
Drug Concentrations ◽  
Human Erythrocyte Membranes ◽  
Low Ionic Strength ◽  
Frog Sciatic Nerve ◽  
Guinea Pig Brain

The adsorption of morphine to guinea pig brain synaptosome membranes and to human erythrocyte membranes was found to be passive, and unaffected by time, temperature, ouabain, dinitrophenol, saponin, or ATP. The membrane/buffer partition coefficient for morphine was 35 (at low ionic strength) and 1.2 (at high ionic strength). The synaptosome membrane/buffer partition coefficient for diphenylhydantoin was around 60 (at pH 8), while that for Δ9-tetrahydrocannabinol (THC) was around 380 (in the concentration range of around 10−5 M). The partition coefficient for the latter drug dropped by a factor of two or three with increasing drug concentrations for both erythrocyte ghosts and synaptosomes; there may be two types of binding sites for THC. The minimum blocking concentrations (frog sciatic nerve) were 1.1 × 10−2 M for morphine, and 8.3 × 10−4 M for diphenylhydantoin. The anesthetizing membrane concentrations of these two drugs are close to the value predicted by the Meyer–Overton rule for local anesthesia (30 mmol/kg dry membrane).

The interaction of human glycophorin with 8-anilino-1-naphthalene sulfonate

1977 ◽  
Vol 55 (9) ◽  
pp. 942-948 ◽  
Author(s):  
Jacob A. Verpoorte
Keyword(s):  
Sialic Acid ◽  
Binding Sites ◽  
Equilibrium Dialysis ◽  
Erythrocyte Membranes ◽  
Ans Binding ◽  
Aromatic Residues ◽  
Apparent Binding Constant ◽  
Human Erythrocyte Membranes ◽  
Low Ionic Strength ◽  
Human Glycophorin

Both the sialoglycoprotein of human erythrocyte membranes, glycophorin, and the sialic acid free protein, obtained by treatment of glycophorin with neuraminidase (EC 3.2.1.18), increase the fluorescence of 8-anilino-1-naphthalene sulfonate (ANS). Binding of ANS to glycophorin is weak compared with the binding to bovine serum albumin (BSA). Equilibrium dialysis gives an apparent binding constant of about 4 × 103 M−1 at neutral pH, but Ka increases 1.75 times when NaCl or CaCl2 are added and 10-fold when the pH is lowered to 3.0. Sialic acid groups do not significantly affect ANS binding, although they have some effect at low ionic strength and neutral pH.Fluorescence studies indicate only one to two binding sites for ANS, with apparent pK = 3.8 ± 0.2. and located close to aromatic residues in glycophorin.Polarization and quantum efficiency of the fluorescence of ANS associated with glycophorin fail to indicate changes in the vicinity of the binding site when the pH is lowered.

scholarly journals The control by Ca2+ of the polyphosphoinositide phosphodiesterase and the Ca2+-pump ATPase in human erythrocytes

1982 ◽  
Vol 202 (1) ◽  
pp. 53-58 ◽  
Author(s):  
C. Peter Downes ◽  
Robert H. Michell
Keyword(s):  
Ionic Strength ◽  
Erythrocyte Membrane ◽  
Erythrocyte Membranes ◽  
Phosphodiesterase 4 ◽  
Maximal Activation ◽  
Human Erythrocyte Membranes ◽  
The Right ◽  
Phosphatidylinositol 4 ◽  
Low Ionic Strength ◽  
Micromolar Range

1. Both the Ca2+-pump ATPase and the polyphosphoinositide phosphodiesterase of the erythrocyte membrane can, when assayed under appropriate conditions, be activated by Ca2+ in the micromolar range. We have therefore compared the mechanisms and affinities for Ca2+ activation of the two enzymes in human erythrocyte membranes, to see whether the polyphosphoinositide phosphodiesterase would be active in normal healthy erythrocytes. 2. At physiological ionic strength and in the presence of calmodulin, the Ca2+-pump ATPase was activated by Ca2+ in a highly co-operative manner, with half-maximal activation occurring at about 0.3μm-Ca2+. At an optimal Ca2+concentration, calmodulin stimulated the Ca2+-sensitive ATPase activity about 10-fold. 3. Ca2+ activated the polyphosphoinositide phosphodiesterase in a non-co-operative manner. The Ca2+ requirements for breakdown of phosphatidylinositol 4-phosphate and phosphatidylinositol 4,5-bisphosphate were identical, which supports our previous conclusion that Ca2+ activates a single polyphosphoinositide phosphodiesterase that degrades both lipids with equal facility. Added calmodulin did not affect the activity of the polyphosphoinositide phosphodiesterase. 4. At low ionic strength in the absence of Mg2+, half-maximal activation of the phosphodiesterase was at about 3μm-Ca2+. The presence of 1mm-Mg2+ shifted the Ca2+ activation curve to the right, as did elevation of the ionic strength. When the Ca2+-pump ATPase and the polyphosphoinositide phosphodiesterase were assayed in the same incubations and under conditions of intracellular ionic strength and Mg2+concentration, the ATPase was fully activated at 3μm-Ca2+, whereas no polyphosphoinositide phosphodiesterase activity was detected below 100μm-Ca2+. 5. The Ca2+-pump ATPase of the erythrocyte membrane normally maintains the Ca2+ concentration of healthy erythrocytes below approx. 0.1μm. It therefore seems unlikely that the polyphosphoinositide phosphodiesterase of the erythrocyte membrane ever expresses its activity in a healthy erythrocyte.

scholarly journals Solubilization of Native Actin Monomers from Human Erythrocyte Membranes

1986 ◽  
Vol 39 (2) ◽  
pp. 117 ◽  
Author(s):  
Leann Tilley ◽  
Margaret Dwyer ◽  
GB Ralston
Keyword(s):  
Ionic Strength ◽  
Human Erythrocyte ◽  
Dnase I ◽  
Erythrocyte Membranes ◽  
Dnase 1 ◽  
Human Erythrocyte Membranes ◽  
Low Ionic Strength

Up to 50% of the actin in erythrocyte membranes can be solubilized at low ionic strength in a form capable of inhibiting DNAse I, in the presence of 0�4 mM ATP and 0�05 mM calcium. In the absence of calcium and A TP, actin is released but is apparently rapidly denatured. Solubilization of G-actin increases with temperature up to 37�C. At higher temperatures, actin is released rapidly but quickly loses its ability to inhibit DNAse 1.

scholarly journals Ultrastructure of the intact skeleton of the human erythrocyte membrane.

1986 ◽  
Vol 102 (3) ◽  
pp. 997-1006 ◽  
Author(s):  
B W Shen ◽  
R Josephs ◽  
T L Steck
Keyword(s):  
Human Erythrocyte ◽  
Actin Filaments ◽  
Band 3 ◽  
Carbon Films ◽  
Erythrocyte Membranes ◽  
Accessory Proteins ◽  
Red Cell Membrane ◽  
Human Erythrocyte Membranes ◽  
Low Ionic Strength ◽  
Triton X

Filamentous skeletons were liberated from isolated human erythrocyte membranes in Triton X-100, spread on fenestrated carbon films, negatively stained, and viewed intact and unfixed in the transmission electron microscope. Two forms of the skeleton were examined: (a) basic skeletons, stripped of accessory proteins with 1.5 M NaCl so that they contain predominantly polypeptide bands 1, 2, 4.1, and 5; and (b) unstripped skeletons, which also bore accessory proteins such as ankyrin and band 3 and small plaques of residual lipid. Freshly prepared skeletons were highly condensed. Incubation at low ionic strength and in the presence of dithiothreitol for an hour or more caused an expansion of the skeletons, which greatly increased the visibility of their elements. The expansion may reflect the opening of spectrin from a compact to an elongated disposition. Expanded skeletons appeared to be organized as networks of short actin filaments joined by multiple (5-8) spectrin tetramers. In unstripped preparations, globular masses were observed near the centers of the spectrin filaments, probably corresponding to complexes of ankyrin with band 3 oligomers. Some of these globules linked pairs of spectrin filaments. Skeletons prepared with a minimum of perturbation had thickened actin protofilaments, presumably reflecting the presence of accessory proteins. The length of these actin filaments was highly uniform, averaging 33 +/- 5 nm. This is the length of nonmuscle tropomyosin. Since there is almost enough tropomyosin present to saturate the F-actin, our data support the hypothesis that tropomyosin may determine the length of actin protofilaments in the red cell membrane.

scholarly journals Multiple supramolecular structures formed by interaction of actin with protamine

1982 ◽  
Vol 205 (1) ◽  
pp. 31-37 ◽  
Author(s):  
Enrico Grazi ◽  
Ermes Magri ◽  
Ivonne Pasquali-Ronchetti
Keyword(s):  
Ionic Strength ◽  
Exchange Reaction ◽  
Dead Time ◽  
High Ionic Strength ◽  
Supramolecular Structures ◽  
Molar Ratio ◽  
First Case ◽  
Atpase Reaction ◽  
Low Ionic Strength ◽  
Millipore Filters

When protamine is added to actin, different supramolecular structures are formed depending on the molar ratio of the two proteins and of the ionic strength of the medium. At low ionic strength, and going from a molar ratio of protamine to G-actin of 4:1, 2:1 and 1:1, globular aggregates are first converted into extended structures and then to long threads in which the constituent ATP–G-actin is rapidly exchangeable with the actin of the medium. At high ionic strength {Tyrode [(1910) Arch. Int. Pharmacodyn. Ther.20, 205–212] solution}, starting from G-actin and protamine in the 1:1 molar ratio, long ropes are formed that can be resolved into intertwining filaments of 4–5nm diameter. The addition of protamine in a 1:1 molar ratio to a solution of F-actin in Tyrode solution causes the breakage of the actin filaments, which is also revealed by the decrease of the viscosity of the solution and the formation of ordered latero-lateral aggregates. The structures formed by reaction of protamine with G-actin can be separated from free G-actin and protamine by filtration through 0.45μm-pore-size Millipore filters. This technique has been exploited to study the exchange reaction between free actin and the actin–protamine complexes. For these studies the 1:1 actin–protamine complex formed at low ionic strength and the 2:1 actin–protamine complex formed in the presence of 23nm-free Mg2+ have been selected. In the first case the exchange reaction is practically complete in the dead time of the experiment (20s). In the second case, where the complex operates like a true ATPase, the rate of the exchange is initially comparable with the rate of the ATP cleavage. Later on, however, the complex undergoes a change and the rate of the exchange between free actin and the actin bound to protamine becomes lower than the rate of the ATPase reaction. It is proposed that the ATP exchanges for ADP directly on the G-actin bound in the complex.

scholarly journals The Use of 2-Chloroethanol for Reversible Depolymerisation of the Protein Shell of Bacteriophage fr

1970 ◽  
Vol 25 (7) ◽  
pp. 711-713 ◽  
Author(s):  
D. Schubert ◽  
H. Frank
Keyword(s):  
Acetic Acid ◽  
Ionic Strength ◽  
Organic Solvent ◽  
High Ionic Strength ◽  
Protein Subunits ◽  
Viruslike Particles ◽  
Low Ionic Strength ◽  
Protein Shell

In mixtures of 1 volume of buffer and 2 volumes of 2-chloroethanol, the icosahedral bacteriophage fr is split into RNA and monomeric protein subunits. After removal of the RNA and after replacement of the organic solvent by water, viruslike particles can be obtained by dialysis of the protein against neutral buffers of high ionic strength, whereas multishell particles are formed in buffers of low ionic strength. All results achieved by the use of 2-chloroethanol are very similar to those obtained using acetic acid.

scholarly journals The composition of cartilage proteoglycans. An investigation using high-and low-ionic-strength extraction procedures

1973 ◽  
Vol 131 (3) ◽  
pp. 541-553 ◽  
Author(s):  
Robert W. Mayes ◽  
Roger M. Mason ◽  
David C. Griffin
Keyword(s):  
Amino Acid ◽  
Ionic Strength ◽  
Density Gradient ◽  
Amino Acid Analysis ◽  
Chondroitin Sulphate ◽  
High Ionic Strength ◽  
Guanidinium Chloride ◽  
Equilibrium Conditions ◽  
Chondroitin Sulphate Proteoglycans ◽  
Low Ionic Strength

1. A proteoglycan fraction (the proteoglycan subunit fraction) was prepared from extracts, with 0.15m-KCl (low-ionic-strength) and 0.5m-LaCl3, 2.0m-CaCl2 and 4.0m-guanidinium chloride (high-ionic-strength), of bovine nasal cartilage by equilibrium-density-gradient centrifugation, essentially as described by Hascall & Sajdera (1969). 2. The use of different centrifugation times showed that near-equilibrium conditions were reached by 48h for the fractions prepared from the high-ionic-strength extracts. The fraction isolated from the low-ionic-strength extract required a longer centrifugation time to reach equilibrium conditions. 3. The composition of the proteoglycan fractions from the various extracts was compared by analyses of their carbohydrate and amino acid contents. Difference indices were calculated from the amino acid analysis to compare the degree of compositional relationship between the protein components of the proteoglycans. 4. Small compositional differences were found between the proteoglycans isolated from the various high-ionic-strength extracts. The protein content of the fractions from the CaCl2 extract and the guanidinium chloride extract showed the greatest difference in this respect, although their amino acid analysis was similar. 5. The proteoglycan fraction isolated from the low-ionic-strength extract shows marked differences in composition from the fractions isolated from the high-ionic-strength extracts. Its protein and glucosamine contents were lower whereas its hexuronic acid and galactosamine contents were higher than those of the latter. It also exhibits major differences in its amino acid composition. The glucosamine:galactosamine ratio of the fraction from the low-ionic-strength extract indicates that it may be an almost exclusively chondroitin sulphate–proteoglycan. Its analysis correlates closely with that of a low-molecular-weight proteoglycan isolated from pig laryngeal cartilage by Tsiganos & Muir (1969). 6. The proteoglycan fractions from both the low- and high-ionic-strength extracts migrate as a single band in zone electrophoresis carried out in a sucrose-density gradient at both pH3.0 and pH7.0, although each showed evidence of band widening during the electrophoresis. All the proteoglycan fractions migrated with the same electrophoretic mobility at pH3.0, irrespective of the differences in composition between them. 7. The differences between the proteoglycans from the low- and high-ionic-strength extracts are discussed and the view is advanced that they may be due to association between predominantly chondroitin sulphate–proteoglycans and a keratan sulphate-enriched proteoglycan species.

scholarly journals Microtubule assembly kinetics. Changes with solution conditions

1987 ◽  
Vol 247 (3) ◽  
pp. 505-511 ◽  
Author(s):  
J S Barton ◽  
D L Vandivort ◽  
D H Heacock ◽  
J A Coffman ◽  
K A Trygg
Keyword(s):  
Activation Energy ◽  
Ionic Strength ◽  
Low Temperature ◽  
Number Concentration ◽  
High Ionic Strength ◽  
Microtubule Assembly ◽  
Microtubule Protein ◽  
Assembly Kinetics ◽  
Low Ionic Strength ◽  
Kinetics Of

The assembly kinetics of microtubule protein are altered by ionic strength, temperature and Mg2+, but not by pH. High ionic strength (I0.2), low temperature (T less than 30 degrees C) and elevated Mg2+ (greater than or equal to 1.2 mM) induce a transition from biphasic to monophasic kinetics. Comparison of the activation energy obtained for the fast biphasic step at low ionic strength (I0.069) shows excellent agreement with the values obtained at high ionic strength, low temperature and elevated Mg2+. From this observation it can be implied that the tubulin-containing reactant of the fast biphasic event is also the species that elongates microtubules during monophasic assembly. Second-order rate constants for biphasic assembly are 3.82(+/- 0.72) x 10(7) M-1.s-1 and 5.19(+/- 1.25) x 10(6) M-1.s-1, and for monophasic assembly the rate constant is 2.12(+/- 0.56) x 10(7) M-1.s-1. The microtubule number concentration is constant during elongation of microtubules for biphasic and monophasic assembly.

Breakdown and reassociation of bacterial spinae

1982 ◽  
Vol 28 (7) ◽  
pp. 795-808
Author(s):  
K. B. Easterbrook ◽  
R. W. Coombs
Keyword(s):  
Ionic Strength ◽  
Protein Conformation ◽  
High Ionic Strength ◽  
Random Coil ◽  
Temperature Dependent ◽  
Calcium Effect ◽  
Α Helix ◽  
Low Ionic Strength ◽  
Β Sheet ◽  
Polymeric Structures

The tubular appendage, spina (Easterbrook and Coombs. 1976. Can. J. Microbiol. 22: 438–440), dissociates most efficiently under conditions of low ionic strength (0.01 M), high pH (10), and high temperature (95 °C). The protomer, spinin, thus produced is stable under these conditions and reassociates on cooling to give two distinct filamentous polymeric structures that differ in their stability, protein conformation, and reassociation characteristics. Under conditions of low ionic strength (0.01 M), reassociation is relatively slow and leads to a product that has significant amounts of α-helix in addition to the high β-sheet component; under conditions of high ionic strength (1 M), reassociation is rapid and the non-β-sheet component is in the random coil configuration. Since polymerization of the latter structure is "seeded" by either endogenous or exogenously supplied spina fragments, the protomers comprising it are assumed to be in the same conformation as in the spinae. High ionic strength induces folding of the protomer, multimeric association, and finally, elongation by a temperature-dependent process. Reassociation appears to be pH (6–10) independent and, apart from a possible minor calcium effect, cation nonspecific.

Sign in / Sign up

Export Citation Format

Share Document