Seedfall in a young-growth Douglas-fir stand: 1950–1978

1982 ◽  
Vol 12 (2) ◽  
pp. 249-254 ◽  
Author(s):  
Donald L. Reukema
Keyword(s):  
Seed Production ◽  
Douglas Fir ◽  
The Other ◽  
Young Growth ◽  
Number Of Seeds

A 29-year record of seedfall in thinned and unthinned portions of a Douglas-fir (Pseudotsugamenziesii (Mirb.) Franco) stand, spanning ages 39 through 68, reveals annual seed production from no seeds to about 3 million per hectare. For the nine largest crops, annual seedfall in the best seed-producing thinning treatment included at least 100 000 filled seed per hectare. The first of these nine crops was in 1950; the other eight occurred at 1- to 4-year intervals beginning with 1959. For the nine largest crops, the proportion of seeds filled averaged 45% and ranged from 30 to 54%. Typically, about two-thirds of the seed fell by mid-December; but for two of the three largest crops, time of seed shedding was greatly delayed. Thinning substantially increased the number of seeds produced in some years following thinning but the effect was not lasting. There was little or no effect of thinning on the proportion of seed filled or timing of seed dissemination.

Partial cut harvesting and ectomycorrhizae: early effects in Douglas-fir-larch forests of western Montana

1980 ◽  
Vol 10 (3) ◽  
pp. 436-440 ◽  
Author(s):  
A. E. Harvey ◽  
M. J. Larsen ◽  
M. F. Jurgensen
Keyword(s):  
Organic Matter ◽  
Soil Organic Matter ◽  
Douglas Fir ◽  
The Other ◽  
Western Montana ◽  
Root Tips ◽  
Residue Removal ◽  
Larch Forests ◽  
Early Effects

Numbers of ectomycorrhizae were assessed 3 years after harvesting approximately 50% of the overstory in two Douglas-fir-larch stands in western Montana, one was subjected to intensive residue removal, the other broadcast burned 1 year after harvest. Numbers of active ectomycorrhizal root tips were significantly reduced in the broadcast burned stand compared to either the intensively utilized stand or to an adjacent, undisturbed stand. This indicates that on difficult-to-regenerate sites, particularly where soil organic matter is low, it may be advantageous to dispose of slash created in partial cuts by means other than burning.

scholarly journals Researches on the Main Characteristics of Red Clover Seedlings and their Influence in

2012 ◽  
Vol 69 (1) ◽  
Author(s):  
Marioara GREBENIȘAN ◽  
Doru PAMFIL ◽  
Dorottya Alice DOMOKOS
Keyword(s):  
Plant Breeding ◽  
Seed Production ◽  
Red Clover ◽  
Production Level ◽  
Seed Crop ◽  
Binding Process ◽  
Lower Variability ◽  
Clover Seed ◽  
Number Of Seeds

Concerning the red clover breeding, it is essential to choose as genitors those varieties that possess good characteristics. In order to identify potential genitors, two red clover varieties were studied at Cluj-Napoca: Roxana, diploid variety and Napoca-tetra, tetraploid variety. The analyzed traits comprised the number of capitula/plant, number of seeds/capitulum and the binding process, under the aspect of their contribution to the seed crop and the interaction between those components, in order to provide important clues about di-and tetraploid red clover seed production, for plant breeding. The highest variability (s%=30) presented regarding the number of flowers/capitulum, diploid variety comparatively with a lower variability (s%=26) regarding the number of flowers number/capitulum, tetraploid varieties. Several traits were compared between di-and tetraploid red clover varieties in order to find genitors which can be used for creating new genotypes with high seed production level.

Seed production in Cardiocrium cordatum: effects of nitrogen and dry mass availability of a plant

2006 ◽  
Vol 84 (5) ◽  
pp. 805-812
Author(s):  
Satoki Sakai ◽  
Akiko Sakai ◽  
Kohta Fujioka
Keyword(s):  
Mass Loss ◽  
Seed Production ◽  
Plant Size ◽  
Dry Mass ◽  
Stem Diameter ◽  
N Content ◽  
N Concentration ◽  
The Mean ◽  
Number Of Seeds

To clarify how seed production depends on the relative N and dry mass availability, we examined the number and size of seeds, and the loss of dry mass in Cardiocrium cordatum (Thunb.) Makaino plants that differed naturally in overall size and stem N content. After adjusting for plant size (basal stem diameter was used as a criterion of plant size), the amount of dry mass lost because of respiration in a plant decreased with an increase in the stem N content of the plant, whereas the total dry mass of seeds of a plant increased with an increase in the stem N content. Plants with a high stem N content relative to dry mass status used dry mass resources more efficiently in seed production by reducing the loss of dry mass. Plants with a higher stem N content produced a greater number of seeds, and the amount of dry mass lost decreased with an increase in the number of seeds of the plant, possibly because the resources allocated to seed production are consumed rapidly, if numerous seeds simultaneously absorb those resources. However, the stem N content of a plant had no influence on the mean seed dry mass, seed N content, and the seed N concentration, and the latter three parameters did not affect respiration loss of dry mass. We concluded that plants undergoing seed production reduce dry mass loss if their relative N to dry mass availability is high, through an increase in the numbers of seeds they produce.

Seed production and persistence of Carnamah and other early strains of Trifolium subterraneum in the wheatbelt of Western Australia

1967 ◽  
Vol 7 (24) ◽  
pp. 25 ◽  
Author(s):  
GB Taylor ◽  
RC Rossiter
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Western Australia ◽  
Subterranean Clover ◽  
Trifolium Subterraneum ◽  
Growing Season ◽  
Early Flowering ◽  
The Other ◽  
Factors Affecting ◽  
Seed Yields

Seed production and persistence of the Carnamah, Northam A, Dwalganup, and Geraldton strains of subterranean clover (Trifolium subterraneum L.) were examined in undefoliated swards in the wheatbelt of Western Australia. The early flowering characteristic of Carnamah was not always associated with higher seed yields. Only when there was a well-defined, early finish to the growing season, or when flowering was very much earlier in Carnamah (viz., following an early 'break' to the season), did this strain clearly outyield both Northam A and Geraldton. The seed yield of Dwalganup was generally inferior to that of the other strains. Factors affecting regeneration are discussed. Under low rainfall conditions, poorer germination-regulation of Carnamah, compared with Geraldton and Northam A, would be expected to result in poorer persistence unless offset by higher seed yields in the Carnamah strain.

The effect of defoliation on seed production by capeweed (Arctotheca calendula)

1973 ◽  
Vol 13 (65) ◽  
pp. 676 ◽  
Author(s):  
JG McIvor ◽  
DF Smith
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Leaf Removal ◽  
Late Flowering ◽  
Individual Seed ◽  
Number Of Seeds

Two experiments were done in pots to assess the effect of defoliation at different times on the seed yield of capeweed (Arctotheca calendula). Yield components measured were: number of seedheads per plant, number of seeds per seedhead, number of seeds per plant, and weight of individual seeds. Of the components of yield, number of florets per seedhead and individual seed weight were maintained under all treatments; number of seedheads and number of seeds per seedhead were more affected by defoliation. Whether grown as spaced plants or in swards, leaf removal did not significantly reduce the number of seeds produced unless combined with bud and flower removal at late flowering only. The results are discussed in relation to the growth and persistence of capeweed in pastures.

scholarly journals Optimizing Surface Micro Grooving to Reduce the Checking and Cupping of Douglas Fir, Western Hemlock and White Spruce Decking Exposed to Natural Weathering

2018 ◽  
Vol 2 (4) ◽  
pp. 67 ◽  
Author(s):  
Sina Heshmati ◽  
Mohammad Mazloomi ◽  
Philip Evans
Keyword(s):  
Numerical Model ◽  
White Spruce ◽  
Groove Depth ◽  
Douglas Fir ◽  
The Other ◽  
Western Hemlock ◽  
Natural Weathering ◽  
Micro Grooving ◽  
Induced Stresses

Machining grooves into the surface of pine and fir (Abies spp.) deckboards reduces undesirable checking that develops when “profiled” boards are exposed to the weather. We aim to develop improved profiles for Douglas fir, western hemlock and white spruce decking to reduce their susceptibility to checking, and understand how profile geometry influences the stresses that cause checking. We varied the width and depth of grooves in profiled deckboards, exposed deckboards to the weather, and measured checking and cupping of boards. A numerical model examined the effect of groove depth on the moisture-induced stresses in profiled spruce boards. Profiling significantly reduced checking, but increased cupping of deckboards made from all three species. Western hemlock checked more than the other two species. Profiles with narrow grooves (rib profiles) were better at restricting checking than profiles with wider grooves. A rib profile with deeper grooves developed smaller stresses than a rib profile with shallower grooves, and boards with the former profile checked less than boards with shallower grooves. We conclude that checking of profiled Douglas fir, western hemlock and white spruce decking is significantly reduced by changing profile geometry, and our results suggest the best profiles to reduce checking of all three species.

Ectomycorrhizae and growth of Douglas-fir seedlings preinoculated with Rhizopogonvinicolor and outplanted on eastern Vancouver Island

1993 ◽  
Vol 23 (8) ◽  
pp. 1711-1715 ◽  
Author(s):  
S.M. Berch ◽  
A.L. Roth
Keyword(s):  
Cold Storage ◽  
Growing Season ◽  
Vancouver Island ◽  
Douglas Fir ◽  
The Other ◽  
Field Soil ◽  
Field Season ◽  
Ectomycorrhizal Colonization ◽  
Growth Differences ◽  
And Control

Ectomycorrhizal colonization of container-grown Pseudotsugamenziesii (Mirb.) Franco (Douglas-fir) inoculated with Rhizopogonvinicolor A.H. Smith was determined after cold storage and after one growing season on a clearcut on eastern Vancouver Island. Inoculated Douglas-fir seedlings were taller than noninoculated controls when outplanted but, perhaps because of browse damage, no growth differences were found after one field season. Rhizopogonvinicolor colonized all of the inoculated but none of the control seedlings examined after cold storage. Volunteer Thelephoraterrestris Fr. colonized almost half of the control and 10% of the inoculated seedlings before outplanting. After one field season, inoculated and control seedlings were colonized by 15 ectomycorrhizal fungi each, only eight of which were found on both. Rhizopogonvinicolor persisted on the roots of inoculated plants, but was also present in the field soil since the control seedlings also bore these mycorrhizae after one growing season. The relative abundance of T. terrestris decreased from the nursery to the field. The other common ectomycorrhizae in the field included Myceliumradicisatrovirens Melin, Cenococcumgeophilum Fr., and types resembling Tuber and Endogone.

CONSUMPTION OF VARIOUS DOUGLAS-FIR CONE STRUCTURES BY BARBARA COLFAXIANA (LEPIDOPTERA: OLETHREUTIDAE)

1977 ◽  
Vol 109 (9) ◽  
pp. 1293-1294
Author(s):  
T. Evan Nebeker
Keyword(s):  
Energy Transfer ◽  
Seed Production ◽  
Energy Budget ◽  
Forest Ecosystem ◽  
Larval Stage ◽  
Douglas Fir ◽  
National Forest ◽  
Larval Instars ◽  
Production Area

During 1971 a study was conducted to determine the amount of the various Douglasfir cone structures (bracts, scales, and seeds) consumed by the Douglas-fir cone moth, Barbara colfaxiana (Kft.), in the Buckhead Seed Production Area, Willamette National Forest, Oregon. It was not the intent of this study to develop a complete energy budget for B. colfaxiana, but rather to determine the number of calories consumed, on the average, by an individual during the larval stage. The behavior of the various larval instars has been discussed by Radcliffe (1952), Keen (1958), Hedlin (1960), and Nebeker (1977). The calorie was selected as the unit of measure due to its usefulness in modeling energy transfer from one component to another in the forest ecosystem.

What determines the number of seed produced in a flowering event? A case study of Calyptrogyne ghiesbreghtiana (Arecaceae)

2000 ◽  
Vol 48 (5) ◽  
pp. 659 ◽  
Author(s):  
Saul A. Cunningham
Keyword(s):  
Resource Allocation ◽  
Seed Production ◽  
Natural Variation ◽  
Seed Set ◽  
Plant Seed ◽  
Flower Production ◽  
Number Of Seeds ◽  
Female Flowers

Calyptrogyne ghiesbreghtiana Linden ex. H. Wendl. is an understorey palm that occurs at La Selva Biological Station, Costa Rica. In this paper I combine analysis of natural variation and results of experimental manipulations to ask (1) what limits seed production? and (2) what processes cause variation in seed production by C. ghiesbreghtiana? The number of seed produced per inflorescence ofC. ghiesbreghtiana was limited substantially by the loss of female flowers to floral herbivores. Much variation in the number of seed produced perinflorescence of C. ghiesbreghtiana was due to losses of developing fruits to predators. Together these phenomena illustrate the influential role of natural enemies in the reproductive success of this plant. Seed-set efficiency (number of seeds/number of female flowers) was highly variable in this species, and such high levels of variation appear to be common in other species. For species with highly variable seed-set efficiency, the role of resource allocation to flower production in determining differences in seed production among individual plants is likely to be relatively small.

Further observations on the pollination mechanism and seed production of Douglas-fir

1982 ◽  
Vol 12 (2) ◽  
pp. 431-434 ◽  
Author(s):  
John N. Owens ◽  
Sheila J. Simpson
Keyword(s):  
Seed Production ◽  
Pollen Grains ◽  
Germination Percentage ◽  
Douglas Fir ◽  
Pollination Mechanism ◽  
Supplemental Pollination

The pollination mechanism of Douglas-fir (Pseudotsugamenziesii (Mirb.) Franco) was studied. Pollen stained five different colors and applied to the same conelets at five different times showed that the pollen applied on the 1st and 3rd days after conelets became receptive was taken into the micropyle in significantly greater quantities than pollen applied at later dates. A second supplemental pollination did not increase the seed efficiency for individual cones. Seeds produced when an average of less than 1.2 pollen grains were taken into the micropyle had essentially the same germination percentage and proportion of abnormal germinants as seeds resulting when an average of 3.4 or more pollen grains were taken into the micropyle.

Sign in / Sign up

Export Citation Format

Share Document