Substitution between floor constructions in wood and natural stone: comparison of energy consumption, greenhouse gas emissions, and costs over the life cycle

2003 ◽  
Vol 33 (6) ◽  
pp. 1061-1075 ◽  
Author(s):  
Ann Kristin Petersen ◽  
Birger Solberg
Keyword(s):  
Life Cycle ◽  
Energy Consumption ◽  
Greenhouse Gas ◽  
Carbon Fixation ◽  
Ghg Emissions ◽  
Natural Stone ◽  
Wooden Floor ◽  
Wood Floor ◽  
Cost Efficient ◽  
Waste Handling

This paper compares two floor constructions used at the new airport outside Oslo, one made of solid oak and one made of natural stone, to (i) make an inventory of energy consumption and greenhouse gas (GHG) emissions over the life cycle of the two constructions, (ii) calculate the differences regarding GHG emissions and cost, and (iii) determine which factors have the strongest influence on the results. Manufacturing the wood floor required 1.6 times more energy and produced one-third of the GHG emissions compared with the natural stone floor. Over the life cycle, net GHG emissions can be avoided only if the wood is used as a biofuel after the replacement or demolition of the floor. The wooden floor must be competitive on price to be a cost-efficient action against global warming. Per cubic metre of wood floor, emissions of up to 1.263 t of CO2 equivalents can be avoided by a substitution between the two floor constructions. The factors that have the most influence on the result are carbon fixation on forest land, waste handling of wood, and discount rate, the latter reflecting the relative importance over time given to a unit of GHG emissions.

scholarly journals RECYCLING TOWARD SUSTAINABLE PAVEMENT DEVELOPMENT:END-OF-LIFE CONSIDERATIONS IN ASPHALT PAVEMENT

2016 ◽  
Vol 78 (7-2) ◽  
Author(s):  
Peyman Babashamsi ◽  
Nur Izzi Md Yusoff ◽  
Halil Ceylan ◽  
Nor Ghani Md Nor
Keyword(s):  
Life Cycle ◽  
Energy Consumption ◽  
Greenhouse Gas ◽  
End Of Life ◽  
Asphalt Pavement ◽  
Ghg Emissions ◽  
Asphalt Pavements ◽  
Waste Materials ◽  
Reduce Energy Consumption ◽  
Landfill Disposal

As quality aggregate sources are depleted, there is a growing importance given to incorporating recycled co-products and waste materials (RCWMs) in new and rehabilitated pavements. An ideal goal would be using recycled materials to create long-lived, well-performing pavement and then being able to use those materials again at the end of their life to create new pavement, thereby effectively achieving a zero-waste highway construction stream. This would not only produce distinct cost advantages, but it would also significantly reduce energy consumption and greenhouse gas (GHG) emissions and eliminate the need for landfill disposal. Drawing from ISO standards and practices, this article reviews the recycling methods and definitions associated with the End-of-Life (EOL) phase and present various EOL considerations for asphalt pavements and the associated challenges to quantify EOL contribution in the pavement life cycle.

scholarly journals Impact of Cycle Time and Payload of an Industrial Robot on Resource Efficiency

Robotics ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 33
Author(s):  
Florian Stuhlenmiller ◽  
Steffi Weyand ◽  
Jens Jungblut ◽  
Liselotte Schebek ◽  
Debora Clever ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Resource Efficiency ◽  
Life Cycle Costs ◽  
Gas Emissions ◽  
Cycle Times ◽  
The Individual

Modern industry benefits from the automation capabilities and flexibility of robots. Consequently, the performance depends on the individual task, robot and trajectory, while application periods of several years lead to a significant impact of the use phase on the resource efficiency. In this work, simulation models predicting a robot’s energy consumption are extended by an estimation of the reliability, enabling the consideration of maintenance to enhance the assessment of the application’s life cycle costs. Furthermore, a life cycle assessment yields the greenhouse gas emissions for the individual application. Potential benefits of the combination of motion simulation and cost analysis are highlighted by the application to an exemplary system. For the selected application, the consumed energy has a distinct impact on greenhouse gas emissions, while acquisition costs govern life cycle costs. Low cycle times result in reduced costs per workpiece, however, for short cycle times and higher payloads, the probability of required spare parts distinctly increases for two critical robotic joints. Hence, the analysis of energy consumption and reliability, in combination with maintenance, life cycle costing and life cycle assessment, can provide additional information to improve the resource efficiency.

The potential of bio-methane as bio-fuel/bio-energy for reducing greenhouse gas emissions: a qualitative assessment for Europe in a life cycle perspective

2008 ◽  
Vol 57 (11) ◽  
pp. 1683-1692 ◽  
Author(s):  
Andrea Tilche ◽  
Michele Galatola
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle ◽  
Anaerobic Digestion ◽  
Greenhouse Gas ◽  
Industrial Wastewater ◽  
Ghg Emissions ◽  
Energy Crops ◽  
Qualitative Assessment ◽  
Potential Contribution ◽  
Ghg Reduction

Anaerobic digestion is a well known process that (while still capable of showing new features) has experienced several waves of technological development. It was “born” as a wastewater treatment system, in the 1970s showed promise as an alternative energy source (in particular from animal waste), in the 1980s and later it became a standard for treating organic-matter-rich industrial wastewater, and more recently returned to the market for its energy recovery potential, making use of different biomasses, including energy crops. With the growing concern around global warming, this paper looks at the potential of anaerobic digestion in terms of reduction of greenhouse gas (GHG) emissions. The potential contribution of anaerobic digestion to GHG reduction has been computed for the 27 EU countries on the basis of their 2005 Kyoto declarations and using life cycle data. The theoretical potential contribution of anaerobic digestion to Kyoto and EU post-Kyoto targets has been calculated. Two different possible biogas applications have been considered: electricity production from manure waste, and upgraded methane production for light goods vehicles (from landfill biogas and municipal and industrial wastewater treatment sludges). The useful heat that can be produced as by-product from biogas conversion into electricity has not been taken into consideration, as its real exploitation depends on local conditions. Moreover the amount of biogas already produced via dedicated anaerobic digestion processes has also not been included in the calculations. Therefore the overall gains achievable would be even higher than those reported here. This exercise shows that biogas may considerably contribute to GHG emission reductions in particular if used as a biofuel. Results also show that its use as a biofuel may allow for true negative GHG emissions, showing a net advantage with respect to other biofuels. Considering also energy crops that will become available in the next few years as a result of Common Agricultural Policy (CAP) reform, this study shows that biogas has the potential of covering almost 50% of the 2020 biofuel target of 10% of all automotive transport fuels, without implying a change in land use. Moreover, considering the achievable GHG reductions, a very large carbon emission trading “value” could support the investment needs. However, those results were obtained through a “qualitative” assessment. In order to produce robust data for decision makers, a quantitative sustainability assessment should be carried out, integrating different methodologies within a life cycle framework. The identification of the most appropriate policy for promoting the best set of options is then discussed.

scholarly journals Energy Consumption and Greenhouse Gas Emissions of Nickel Products

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5664
Author(s):  
Wenjing Wei ◽  
Peter B. Samuelsson ◽  
Anders Tilliander ◽  
Rutger Gyllenram ◽  
Pär G. Jönsson
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Process Model ◽  
Ghg Emissions ◽  
Primary Energy ◽  
Nickel Metal ◽  
Gas Emissions ◽  
Nickel Smelting ◽  
Ore Grade

The primary energy consumption and greenhouse gas emissions from nickel smelting products have been assessed through case studies using a process model based on mass and energy balance. The required primary energy for producing nickel metal, nickel oxide, ferronickel, and nickel pig iron is 174 GJ/t alloy (174 GJ/t contained Ni), 369 GJ/t alloy (485 GJ/t contained Ni), 110 GJ/t alloy (309 GJ/t contained Ni), and 60 GJ/t alloy (598 GJ/t contained Ni), respectively. Furthermore, the associated GHG emissions are 14 tCO2-eq/t alloy (14 tCO2-eq/t contained Ni), 30 t CO2-eq/t alloy (40 t CO2-eq/t contained Ni), 6 t CO2-eq/t alloy (18 t CO2-eq/t contained Ni), and 7 t CO2-eq/t alloy (69 t CO2-eq/t contained Ni). A possible carbon emission reduction can be observed by comparing ore type, ore grade, and electricity source, as well as allocation strategy. The suggested process model overcomes the limitation of a conventional life cycle assessment study which considers the process as a ‘black box’ and allows for an identification of further possibilities to implement sustainable nickel production.

Life cycle energy consumption and GHG emissions of biomass-to-hydrogen process in comparison with coal-to-hydrogen process

Energy ◽  
2020 ◽  
Vol 191 ◽  
pp. 116588 ◽  
Author(s):  
Guoxuan Li ◽  
Peizhe Cui ◽  
Yinglong Wang ◽  
Zhiqiang Liu ◽  
Zhaoyou Zhu ◽  
...  
Keyword(s):  
Life Cycle ◽  
Energy Consumption ◽  
Ghg Emissions

scholarly journals Renewable Energy and EU 2020 Target for Energy Efficiency in the Czech Republic and Slovakia

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 965 ◽  
Author(s):  
Jacek Brożyna ◽  
Wadim Strielkowski ◽  
Alena Fomina ◽  
Natalya Nikitina
Keyword(s):  
Economic Growth ◽  
Energy Efficiency ◽  
Renewable Energy ◽  
Czech Republic ◽  
Energy Consumption ◽  
Greenhouse Gas ◽  
Energy Policy ◽  
Ghg Emissions ◽  
The Czech Republic ◽  
The Eu

Our paper focuses on the renewable energy and EU 2020 target for energy efficiency in the Czech Republic and Slovakia. We study the reduction of greenhouse gas (GHG) emissions in these two EU Member States through the prism of the Europe 2020 strategy and the 3 × 20 climate and energy package and economic growth (represented by the Gross Domestic Product (GDP) that allows to measure the national dynamics and provide cross-country comparisons) without attributing specific attention to issues such as the electrification of transport or heating, and thence leaving them outside the scope of this paper. Both Czech Republic and Slovakia are two post-Communist countries that still face the consequences of economic transformation and struggle with the optimal management of natural resources. Both countries encountered profound system transformation after 1989 that are apparent in all three measures of sustainable development used in our study. We show that it is unlikely that the planned increase in renewable energy in the Czech Republic and Slovakia will reach its targets, but they might succeed in reducing their energy consumption and greenhouse gas emissions. Our findings show that the energy intensity of Czech and Slovak economies increased in the early 2000s and then stabilized at a level about twice of the EU average. It appears that this value is likely to remain the same in the forthcoming years. However, implementation of GHG emissions in the Czech Republic and Slovakia may be at risk in case the proper energy policy is not maintained. Moreover, our results show how the increase in the share of renewable energy and improvement in energy efficiency go hand-in-hand with mining and exploiting the energy sources that is notorious for the transition economies. We also demonstrate that a proper energy policy is required for effectively reducing energy consumption and greenhouse gas emissions. There is a need for commitments made by relevant stakeholders and policymakers targeted at achieving sustainable economic growth and energy efficiency. In addition, we demonstrate that there is a need for maintaining a proper balance between economic development and environmental protection, which is a must for the EU sustainable energy development agenda and all its accompanying targets for all its Member States.

scholarly journals Scenario Analysis for GHG Emission Reduction Potential of the Building Sector for New City in South Korea

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5514
Author(s):  
Seo-Hoon Kim ◽  
SungJin Lee ◽  
Seol-Yee Han ◽  
Jong-Hun Kim
Keyword(s):  
Climate Change ◽  
Energy Consumption ◽  
South Korea ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Ghg Emissions ◽  
Building Energy ◽  
Building Sector ◽  
Ghg Reduction ◽  
New City

A new government report on climate change shows that global emissions of greenhouse gases have increased to very high levels despite various policies to reduce climate change. Building energy accounts for 40% of the world’s energy consumption and accounts for 33% of the world’s greenhouse gas emissions. This study applied the LEAP (Long-range energy alternatives planning) model and Bass diffusion method for predicting the total energy consumption and GHG (Greenhouse Gas) emissions from the residential and commercial building sector of Sejong City in South Korea. Then, using the Bass diffusion model, three scenarios were analyzed (REST: Renewable energy supply target, BES: Building energy saving, BEP: Building energy policy) for GHG reduction. The GHG emissions for Sejong City for 2015–2030 were analyzed, and the past and future GHG emissions of the city were predicted in a Business-as-Usual (BAU) scenario. In the REST scenario, the GHG emissions would attain a 24.5% reduction and, in the BES scenario, the GHG emissions would attain 12.81% reduction by 2030. Finally, the BEP scenario shows the potential for a 19.81% GHG reduction. These results could be used to guide the planning and development of the new city.

Sign in / Sign up

Export Citation Format

Share Document