Styrene hydration and stilbene isomerization in strong acid media. An excess acidity analysis

1999 ◽  
Vol 77 (5-6) ◽  
pp. 709-718 ◽  
Author(s):  
Robin A Cox
Keyword(s):  
Proton Transfer ◽  
Transition State ◽  
Positive Charge ◽  
Isotope Effects ◽  
Activation Parameters ◽  
Strong Acid ◽  
Analysis Data ◽  
The Other ◽  
Acid Media ◽  
Solvent Isotope

Rate constants obtained for the hydration of some ring-substituted styrenes, YC6H4CR=CH2 (R = H, CH3, CF3) (1-3), and for the isomerization of some cis-stilbenes substituted in both rings, YC6H4CH=CHC6H4Z (4), in aqueous H2SO4, D2SO4, and HClO4 media at 25°C and, in some cases, at other temperatures, have been subjected to an excess acidity analysis. Data obtained by different groups and in different media for the same substrates agree very well. The m‡ values obtained show that all the substrates react via the A-SE2 mechanism, rate-determining proton transfer to carbon; the transition state is late, with the proton transfer being about three-quarters complete. The reactivities of 1-3 in the aqueous standard state are obtained by extrapolation; they are 1:103:10-7, respectively. The stilbenes are relatively unreactive; log k0 values for compounds with substituents in the ring adjacent to the developing positive charge show a good correlation with σ+ with a large negative ρ+ value, but those for compounds with substituents in the other ring correlate with σ with a small negative ρ. Extrapolated log k0 values for 1 and 3 show a good correlation with σ+, but those for 2 correlate with neither σ+ nor σ, because the α-CH3 group twists the molecule and reduces the resonance interaction of ring substituents with the developing positive charge. On the other hand, this effect is not seen in 3, when the strongly deactivating α-CF3 group is present, meaning that the transition state is forced to be planar in this case. The activation parameters, solvent isotope effects, and excess acidity slope parameters m‡m* obtained in the analysis are tabulated and discussed. The parameters obtained for the parent styrenes 1 are very similar to those previously obtained for the phenylacetylenes YC6H4Ctriple bondCH, meaning that reactions with vinyl cation intermediates and reactions with benzyl cation intermediates can be quite similar. Key words: styrenes, stilbenes, hydration, excess acidity, LFER, mechanism.

Heavy Atom Kinetic Isotope Effects in HCN Elimination from Some Tricyanides in Methanol [1]

1978 ◽  
Vol 33 (12) ◽  
pp. 1496-1502
Author(s):  
Fouad M. Fouad ◽  
Patrick G. Farrell
Keyword(s):  
Transition State ◽  
Opposite Direction ◽  
Isotope Effects ◽  
Heavy Atom ◽  
Transition States ◽  
Kinetic Isotope Effects ◽  
The Other ◽  
Kinetic Isotope ◽  
Solvent Isotope ◽  
Solvent Isotope Effects

AbstractRates of HCN elimination from polycyanides N,N-dimethyl-4-(1,2,2-tricyanoethyl)-aniline (1), 9-cyano-9-dicyanomethyl fluorene (2), 1,1-diphenyl-1,2,2-tricyanoethane (3), and 2-phenyl-1,1,2-tricyanopropane (4) have been studied in methanol. Elimination from 1 occurs via (E 1 c B)R, mechanism. On the other hand olefin formation from 2-4 has been shown to occur via (E 1)anion pathway. Heavy atom kinetic isotope effects indicated that product stability is not the sole factor controlling the transition state geometries. Values of k12/k14 were found to be in the order 2 > 3 > 4 > 1 which implied transition states with more carbanion-like structure in the opposite direction. Solvent isotope effects and enthalpies of activation were also determined and discussed in terms of transition states geometries.

scholarly journals Rate and Product Studies with 1-Adamantyl Chlorothioformate under Solvolytic Conditions

2021 ◽  
Vol 22 (14) ◽  
pp. 7394
Author(s):  
Kyoung Ho Park ◽  
Mi Hye Seong ◽  
Jin Burm Kyong ◽  
Dennis N. Kevill
Keyword(s):  
Rate Constants ◽  
Isotope Effects ◽  
Ion Pairs ◽  
Carbonyl Sulfide ◽  
Activation Parameters ◽  
Chloride Ions ◽  
Reaction Channels ◽  
Decomposition Pathway ◽  
Solvent Isotope ◽  
Solvent Isotope Effects

A study was carried out on the solvolysis of 1-adamantyl chlorothioformate (1-AdSCOCl, 1) in hydroxylic solvents. The rate constants of the solvolysis of 1 were well correlated using the Grunwald–Winstein equation in all of the 20 solvents (R = 0.985). The solvolyses of 1 were analyzed as the following two competing reactions: the solvolysis ionization pathway through the intermediate (1-AdSCO)+ (carboxylium ion) stabilized by the loss of chloride ions due to nucleophilic solvation and the solvolysis–decomposition pathway through the intermediate 1-Ad+Cl− ion pairs (carbocation) with the loss of carbonyl sulfide. In addition, the rate constants (kexp) for the solvolysis of 1 were separated into k1-Ad+Cl− and k1-AdSCO+Cl− through a product study and applied to the Grunwald–Winstein equation to obtain the sensitivity (m-value) to change in solvent ionizing power. For binary hydroxylic solvents, the selectivities (S) for the formation of solvolysis products were very similar to those of the 1-adamantyl derivatives discussed previously. The kinetic solvent isotope effects (KSIEs), salt effects and activation parameters for the solvolyses of 1 were also determined. These observations are compared with those previously reported for the solvolyses of 1-adamantyl chloroformate (1-AdOCOCl, 2). The reasons for change in reaction channels are discussed in terms of the gas-phase stabilities of acylium ions calculated using Gaussian 03.

Isotope effects and activation parameters for the proton transfer reaction from 1-(4-nitrophenyl)-1-nitroethane to free anions and ion pairs of cesium n-propoxide in n-propanol solvent

1986 ◽  
Vol 64 (6) ◽  
pp. 1021-1025 ◽  
Author(s):  
Arnold Jarczewski ◽  
Grzegorz Schroeder ◽  
Przemyslaw Pruszynski ◽  
Kenneth T. Leffek
Keyword(s):  
Proton Transfer ◽  
Rate Constants ◽  
Isotope Effects ◽  
Ion Pairs ◽  
Activation Parameters ◽  
Solvation Shell ◽  
Ion Pair ◽  
Initial State ◽  
Free Ion ◽  
Deuteron Transfer

Rate constants for the proton and deuteron transfer from 1-(4-nitrophenyl)-1-nitroethane to cesium n-propoxide in n-propanol have been measured under pseudo-first-order conditions with an excess of base for four temperatures between 5 and 35 °C. Using literature values of the fraction of cesium n-propoxide ion pairs that are dissociated into free ions, separate second-order rate constants for the proton and deuteron transfer to the ion pair and to the free ion have been calculated. The cesium n-propoxide ion pair is about 2.8 times more reactive than the free n-propoxide ion. The primary kinetic isotope effects for the two reactions are the same (kH/kD = 6.1–6.3 at 25 °C) within experimental error. The enthalpy of activation is smaller for the ion-pair reaction and the entropy of activation more negative than for the free-ion reaction. For proton transfer, ΔH±ion pair = 8.3 ± 0.2 kcal mol−1, ΔH±ion = 9.6 ± 1.0 kcal mol−1, ΔS±ion pair = −12.3 ± 0.6 cal mol−1 deg−1, ΔS±ion = −10.1 ± 3.4 cal mol−1 deg−1. The greater reactivity of the ion pair relative to the free ion is interpreted in terms of the weaker solvation shell of the ion pair in the initial state.

A comparison of the mechanisms of hydrolysis of benzimidates, esters, and amides in sulfuric acid media

2005 ◽  
Vol 83 (9) ◽  
pp. 1391-1399 ◽  
Author(s):  
Robin A Cox
Keyword(s):  
Sulfuric Acid ◽  
Isotope Effects ◽  
Ester Hydrolysis ◽  
Water Molecules ◽  
Acid Media ◽  
Tetrahedral Intermediate ◽  
Amide Hydrolysis ◽  
Solvent Isotope ◽  
Reaction Media ◽  
Hydrolysis Of

The mechanisms given in textbooks for both ester and amide hydrolysis in acid media are in need of revision. To illustrate this, benzimidates were chosen as model compounds for oxygen protonated benzamides. In aqueous sulfuric acid media they hydrolyze either by a mechanism involving attack of two water molecules at the carbonyl carbon to give a neutral tetrahedral intermediate directly, as in ester hydrolysis, or by an SN2 attack of two water molecules at the alkyl group of the alkoxy oxygen to form the corresponding amide, or by both mechanisms, depending on the structure of the benzimidate. The major line of evidence leading to these conclusions is the behavior of the excess acidity plots resulting from the rate constants obtained for the hydrolyses as functions of acid concentration and temperature. The first of these mechanisms is in fact very similar to one found for the hydrolysis of benzamides, as inferred from: (1) similar excess acidity plot behaviour; and (2) the observed solvent isotope effects for amide hydrolysis, which are fully consistent with the involvement of two water molecules, but not with one or with three (or more). This mechanism starts out as essentially the same one as that found for ester hydrolysis under the same conditions. Differences arise because the neutral tetrahedral intermediate, formed directly as a result of the protonated substrate being attacked by two water molecules (not one), possesses an easily protonated nitrogen in the amide and benzimidate cases, explaining both the lack of 18O exchange observed for amide hydrolysis and the irreversibility of the reaction. Protonated tetrahedral intermediates are too unstable to exist in the reaction media; in fact, protonation of an sp3 hybridized oxygen to put a full positive charge on it is extremely difficult. (This means that individual protonated alcohol or ether species are unlikely to exist in these media either.) Thus, the reaction of the intermediate going to product or exchanged reactant is a general-acid-catalyzed process for esters. For amide hydrolysis, the situation is complicated by the fact that another, different, mechanism takes over in more strongly acidic media, according to the excess acidity plots. Some possibilities for this are given.Key words: esters, amides, benzimidates, hydrolysis, excess acidity, mechanism, acid media.

Model calculations of isotope effects. VII. Deprotonation of 2-nitropropane by oxy anion bases

1983 ◽  
Vol 36 (8) ◽  
pp. 1503
Author(s):  
DJ McLennan
Keyword(s):  
Proton Transfer ◽  
Transition State ◽  
Isotope Effects ◽  
Experimental Results ◽  
Electron Delocalization ◽  
Model Calculations ◽  
Charge Delocalization ◽  
Successful Model ◽  
Deuterium Isotope Effects ◽  
State Models

Model calculations of primary and secondary deuterium isotope effects for the hydroxide-induced deprotonation of 2-nitropropane are reported. Various transition-state models have been examined in an effort to reproduce experimental results. A purely pyramidal transition state in which proton transfer has run far ahead of carbon rehybridization and charge delocalization is a successful model as far as isotope effects are concerned, but may fail on other counts. Three incipient trigonal models for the transition state have been tested, and, although none can be firmly eliminated by the resultant isotope effects, those involving the proton transfer's running ahead of electron delocalization and perhaps carbon rehybridization are favoured.

Sign in / Sign up

Export Citation Format

Share Document