Separation of U(VI) from aqueous solutions by precipitate flotation with 8-quinolinol and surfactants

1984 ◽  
Vol 62 (1) ◽  
pp. 51-55 ◽  
Author(s):  
Kamal Shakir ◽  
Kamal Benyamin ◽  
Mourad Aziz
Keyword(s):  
Aqueous Solutions ◽  
Cetyl Trimethyl Ammonium Bromide ◽  
Sodium Lauryl Sulphate ◽  
Ammonium Bromide ◽  
Factors Affecting ◽  
Foam Separation ◽  
Controlled Conditions ◽  
Percentage Removal ◽  
Cetyl Trimethyl Ammonium ◽  
Ph Range

Foam separation investigations over the 2.5–10.5 pH range show that U(VI) can be successfully separated from aqueous solutions by precipitation with oxine and subsequent flotation of the precipitate, either in absence or in presence of surfactant collectors. Collectors tested were: cetyl trimethyl ammonium bromide (CTAB) and sodium lauryl sulphate (NaLS). The extent of removal depends on many factors and removals as high as 98% could be achieved when uranyl oxinate precipitate was floated, under certain controlled conditions, in the presence of CTAB. Factors affecting the percentage removal were investigated and the best conditions were selected. The results obtained are discussed in terms of the hydrolytic behaviour of U(VI).

Removal of molybdenum(VI) from aqueous solutions using nano zero-valent iron supported on biochar enhanced by cetyl-trimethyl ammonium bromide: adsorption kinetic, isotherm and mechanism studies

2018 ◽  
Vol 2017 (3) ◽  
pp. 859-868 ◽  
Author(s):  
J. J. Lian ◽  
Y. G. Huang ◽  
B. Chen ◽  
S. S. Wang ◽  
P. Wang ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Photoelectron Spectroscopy ◽  
Cetyl Trimethyl Ammonium Bromide ◽  
Zero Valent Iron ◽  
Ammonium Bromide ◽  
Standard Entropy ◽  
X Ray ◽  
Pseudo Second Order ◽  
Cetyl Trimethyl Ammonium ◽  
Isotherm Equations

Abstract A new carbonized pomelo peel biosorbent (MCPP) modified with nanoscale zero-valent iron (NZVI) and cetyl-trimethyl ammonium bromide was prepared and employed for the adsorption of molybdate (Mo(VI)) from aqueous solution. We investigated the effects of various conditions on Mo(VI) adsorption and evaluated the results based on adsorption kinetics models and isotherm equations. The kinetic data fitted to the pseudo-second-order model. The Langmuir model best described the adsorption of Mo(VI) on MCPP. The values of changes in Gibbs free energy, standard enthalpy, and standard entropy revealed that the adsorption process was feasible, spontaneous and endothermal. X-ray diffraction, Fourier transform infrared and X-ray photoelectron spectroscopy measurements suggested that Mo(VI) adsorption occurred via both the reduction and surface adsorption. Thus, biochar, prepared from fruit residue, can be applied to remove Mo(VI) from aqueous solutions. More importantly, our results provide a sustainable approach for Mo(VI) removal from wastewater by means of functional modification.

scholarly journals Preparation of Porous Hydroxyapatite Using Cetyl Trimethyl Ammonium Bromide as Surfactant for the Removal of Lead Ions from Aquatic Solutions

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1617
Author(s):  
Silviu-Adrian Predoi ◽  
Carmen Steluta Ciobanu ◽  
Mikael Motelica-Heino ◽  
Mariana Carmen Chifiriuc ◽  
Monica Luminita Badea ◽  
...  
Keyword(s):  
Cetyl Trimethyl Ammonium Bromide ◽  
Morphological Changes ◽  
Low Cost ◽  
Lead Ions ◽  
Ammonium Bromide ◽  
Porous Hydroxyapatite ◽  
X Ray ◽  
Composition And Structure ◽  
Cetyl Trimethyl Ammonium ◽  
Co Precipitation

In the present study, a new low-cost bioceramic nanocomposite based on porous hydroxyapatite (HAp) and cetyl trimethyl ammonium bromide (CTAB) as surfactant was successfully obtained by a simple chemical co-precipitation. The composition and structure of the HAp-CTAB were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) spectrometer, and N2 adsorption/desorption analysis. The capacity of HAp-CTAB nanocomposites to remove the lead ions from aqueous solutions was studied by adsorption batch experiments and proved by Langmuir and Freundlich models. The Pb2+ removal efficiency of HAp-CTAB biocomposite was also confirmed by non-destructive ultrasound studies. The cytotoxicity assays showed that the HAp-CTAB nanocomposites did not induce any significant morphological changes of HeLa cells after 24 h of incubation or other toxic effects. Taken together, our results suggests that the obtained porous HAp-CTAB powder could be used for the decontamination of water polluted with heavy metals, such as Pb2+.

Influence of Different Dispersants on the Dispersion Property of Nano-Aluminium Powders

2011 ◽  
Vol 71-78 ◽  
pp. 122-125 ◽  
Author(s):  
Ling Li Song ◽  
Ren Yuan Zhang ◽  
Ling Bo Mao ◽  
Wen Jie Zhu ◽  
Miao Yan Zheng
Keyword(s):  
Sodium Dodecyl Sulfate ◽  
Ultrasonic Vibration ◽  
Cetyl Trimethyl Ammonium Bromide ◽  
Sodium Dodecyl ◽  
Dispersion Property ◽  
Ammonium Bromide ◽  
Aluminum Powders ◽  
Ultrasonic Time ◽  
Dodecyl Sulfate ◽  
Cetyl Trimethyl Ammonium

The influences of dispersant type, supersonic time and concentration on the dispersion property of the nano-aluminium powders in glycol water were systematically studied by using Sodium dodecyl sulfate (SDS)，cetyl trimethyl ammonium bromide (CTAB) and sodium hexa metah posphate（SHMP）as dispersants. During the first stage of the experiments, influences of dispersant type and ultrasonic time with these dispersants were evaluated. The next stage of the study was focused on SHMP concentration. The influence of SHMP concentration was assessed. The results show that with the increasing of ultrasonic time, the dispersion property of nano-aluminum powders first increases and then decreases, and SHMP is the best one. The excellent dispersing condition on the dispersion property of nano-aluminium is: 5g/L SHMP and 50 min ultrasonic vibration.

scholarly journals SYNTHESIS OF COPPER NANOPARTICLES USING ASCORBIC ACID AND CETYL TRIMETHYL AMMONIUM BROMIDE

2018 ◽  
Vol 11 (14) ◽  
pp. 62
Author(s):  
Saurabh Singh ◽  
Bimlesh Kumar ◽  
Narendra Kumar Pandey ◽  
Barinder Kaur ◽  
Arun Kumar ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Copper Nanoparticles ◽  
Cetyl Trimethyl Ammonium Bromide ◽  
Ammonium Bromide ◽  
Distilled Water ◽  
Bromide Solution ◽  
Cetyl Trimethyl Ammonium ◽  
Dialysis Bag ◽  
Spray Dried ◽  
Glass Beaker

Objective: The present study highlights the development of a method to synthesize copper nanoparticles (CuNPs).Methods: CuNPs were developed using 0.01 M copper penta sulfate and 0.11 M of ascorbic acid (AA) and 0.03 M of cetyl trimethyl ammonium bromide solution. The synthesized CuNPs were differentiated through filtration and washed by water (deionized). CuNPs were kept in dialysis bag 70 KD in a 250 mL glass beaker along with distilled water. The assembly was kept on a magnetic stirrer for 24 h at 500 rpm. Then, the dialysis bag containing CuNPs solution was filtered by a filter assembly with 0.2 μm nylon filter. The filtered CuNPs were spray dried with the help of spray drier.Results: The prepared CuNPs were found to be 440 nm with zeta potential of −10 mV and polydispersity index 0.314.Conclusion: The investigation deciphers the promising and material technique to synthesis of CuNPs by methods for synthetic reduction utilizing strategy using AA (0.2 M) and sodium hydroxide (1 M), and Syloid 244FP.

Sign in / Sign up

Export Citation Format

Share Document