scholarly journals The monoblocking of symmetrical diketones on insoluble polymer supports

1983 ◽  
Vol 61 (7) ◽  
pp. 1405-1409 ◽  
Author(s):  
Zhang-Huang Xu ◽  
Colin R. McArthur ◽  
Clifford C. Leznoff
Keyword(s):  
Acid Hydrolysis ◽  
Nmr Spectra ◽  
High Yield ◽  
Styrene Copolymer ◽  
Polymer Supports ◽  
Vicinal Diol ◽  
Insoluble Polymer ◽  
C Nmr ◽  
Phenylmagnesium Bromide

A 1% crosslinked divinylbenzene–styrene copolymer, incorporating vicinal diol groups or their isopropylidenc precursors, was used to form the monoacetals of the symmetrical diketones, p-diacetylbenzene, 1,2-cyclohexanedione, 1,3-cyclohexanedionc, 1,4-cyclohexanedione, and 2,5-hexanedione. The free ketone groups reacted with phenylmagnesium bromide to give, in high yield, after acid hydrolysis from the polymer, the expected products such as 3-phenyl-2-cyclohexen-1-one from 1,3-cyclohexanedione. The 13C nmr spectra of some polymer-bound substrates and simple analogs are described.

Δ-Sym-cis and Δ-unsym-cis-carbonato-(2S,2'S)-2,2'-ethylene-bis(2-amino-3-methylbutanoato)cabaltate(III) isomers

1987 ◽  
Vol 52 (6) ◽  
pp. 1488-1493 ◽  
Author(s):  
František Jursík ◽  
Samir Abdel-Moez
Keyword(s):  
Acid Hydrolysis ◽  
Absolute Configuration ◽  
Nmr Spectra ◽  
Tetradentate Ligand ◽  
Steric Crowding ◽  
The Absolute ◽  
Kinetic Effects ◽  
Hydrolysis Of ◽  
C Nmr

The tetradentate ligand (2S,2'S)-2,2'-ethylene-bis(2-amino-3-methylbutanoato) (eddval) is coordinated in the [Co(eddval)CO3]- anion to give 88% of Δ-sym-cis and 12% of Δ-unsym-cis isomers. The stereospecific formation of the Δ-sym-cis isomer is explained by steric crowding in the Λ-sym-cis isomer. The predominance of the sym-cis isomer indicates that the synthesis is also influenced by kinetic effects. These are particularly pronounced in the case of the Δ-unsym-cis isomer which for steric reasons is thermodynamically less stable than the Λ-unsym-cis isomer. The secondary nitrogen atoms in the Δ-sym-cis isomer are of the R configuration whereas in the Δ-unsym-cis isomer they have configuration R and S. The absolute configuration of the isomers has been determined from their absorption, CD, 1H and 13C NMR spectra. Acid hydrolysis of Δ-sym-cis-[Co(eddval)CO3]- proceeds with retention of configuration to give the Δ-[Co(eddval)(H2O)2]+ isomer.

The use of polymer supports in organic synthesis. V. The preparation of monoacetates of symmetrical diols

1976 ◽  
Vol 54 (6) ◽  
pp. 935-942 ◽  
Author(s):  
Thomas M. Fyles ◽  
Clifford C. Leznoff
Keyword(s):  
Organic Synthesis ◽  
Acetyl Chloride ◽  
Methyl Benzoate ◽  
Styrene Copolymer ◽  
Polymer Supports ◽  
Acid Cleavage ◽  
Insoluble Polymer

A 2% cross-linked divinylbenzene–styrene copolymer was directly lithiated with n-butyllithium in the presence of N,N,N′,N′-tetramethylethylenediamine. The lithiated polymer on reaction with a benzophenone gave an insoluble polymer-bound trityl alcohol. Further reaction with acetyl chloride gave a polymer-bound trityl chloride which, on treatment with the primary symmetrical diols 1,10-decanediol, 1,7-heptanediol, and 1,4-butanediol, gave mostly symmetrical diols monoblocked by insoluble polymer-bound trityl groups. Acetylation followed by acid cleavage from the polymer gave the monoacetates of 1,10-decanediol, 1,7-heptanediol, and 1,4-butanediol and some recovered diols. The recovered polymer can be efficiently recycled. The quantity of recovered diol was related to the problem of 'double-binding' of the symmetrical diols to the polymer-bound trityl groups. The extent of 'double-binding' could be greatly reduced by the use of polymer-bound trityl chloride prepared via the lithiated polymer and methyl benzoate or phosgene.

scholarly journals The Use of Polymer Supports in Organic Synthesis. III. Selective Chemical Reactions on One Aldehyde Group of Symmetrical Dialdehydes

1973 ◽  
Vol 51 (22) ◽  
pp. 3756-3764 ◽  
Author(s):  
Clifford C. Leznoff ◽  
Jack Y. Wong
Keyword(s):  
Aldol Condensation ◽  
Aluminum Hydride ◽  
Aldehyde Group ◽  
Polymer Support ◽  
High Yield ◽  
Yield Reduction ◽  
Polymer Supports ◽  
Acid Cleavage ◽  
Unique Method ◽  
Insoluble Polymer

An insoluble polymer support system incorporating a diol functional group was prepared. The symmetrical dialdehydes, terephthalaldehyde and isophthalaldehyde, were attached to the polymer through acetal formation, constituting a unique method of blocking one aldehyde group of symmetrical dialdehydes. The free aldehyde group was reacted with hydroxylamine to give the mono-oximes of the terephthalaldehyde and isophthalaldehyde upon acid cleavage from the polymer. Similarly, the polymer bound aldehydes were reacted with Wittig reagents to give p- and m-formylstilbenes and 1-p- and -m-formyl-phenyl-4-phenyl-1,3-butadienes. The crossed aldol condensation of acetophenone with the symmetrical dialdehydes gave the 3-p- and -m-formylphenyl-1-phenyl-2-propene-1-ones (formylchalcones) in high yield. The Grignard reaction of phenylmagnesium bromide on the polymer bound aldehyde gave(p- and m-formylphenyl)phenylcarbinol in quantitative yield. Reduction of the polymer bound free aldehydes with sodium bis(2-methoxyethoxy)-aluminum hydride gave p- and m-hydroxymethylbenzaldehydes. Similarly the mixed benzoin condensation of polymer bound terephthalaldehyde and isophthalaldehyde gave p- and m-formylbenzils.

Synthese von 1-Butyl-2,3,4,5-tetraphenyl-2,4-cyclopentadien und seiner Natrium-, Thallium(I)-und Eisen(II)-Komplexe / Synthesis of 1-Butyl-2,3,4,5-tetraphenyl-2,4-cyclopentadiene and its Sodium, Thallium (I) and Iron(II) Complexes

1997 ◽  
Vol 52 (1) ◽  
pp. 40-44 ◽  
Author(s):  
Herbert Schumann ◽  
Alexander Lentz
Keyword(s):  
Acid Hydrolysis ◽  
Nmr Spectra ◽  
New Compounds ◽  
C Nmr

1-Butyl-2,3,4,5-tetraphenyl-2,4-cyclopentadiene (3) is prepared starting from 2,3,4,5-tetra-phenylcyclopentadien-1-one which forms 1-butyl-1-hydroxy-2,3,4,5-tetraphenylcyclopentadiene (1) by reaction with BuLi followed by acid hydrolysis. 1 and HBr give 1-bromo-1-butyl-2,3,4,5-tetraphenylcyclopentadiene (2), which in its turn reacts with BuLi and H2O /H+ to yield 3. Treatment of 3 with NaNH2, TlOEt or FeCl2 yields Na[C5Ph4Bu] (4), Tl[C5Ph4Bu] (5) and the corresponding ferrocene Fe[C5Ph4Bu]2 (6), respectively. The 1H and 13C NMR spectra of the new compounds are reported and discussed

Conformational structure of ethylene glycol dibenzoate. Vibrational and NMR spectra

1981 ◽  
Vol 46 (8) ◽  
pp. 1913-1929 ◽  
Author(s):  
Bohdan Schneider ◽  
Pavel Sedláček ◽  
Jan Štokr ◽  
Danica Doskočilová ◽  
Jan Lövy
Keyword(s):  
Ethylene Glycol ◽  
Vibrational Spectra ◽  
Nmr Spectra ◽  
Coupling Constants ◽  
Conformational Structure ◽  
Infrared And Raman Spectra ◽  
H Nmr ◽  
Liquid States ◽  
Crystalline Forms ◽  
C Nmr

It was found that three crystalline forms of ethylene glycol dibenzoate can be prepared. Infrared and Raman spectra of these three forms, as well as of the glassy and liquid states, were measured. From 3JHH coupling constants obtained by analysis of the 13C satellite band of the -CH2- group in 1H NMR spectra, and from the 3JCH coupling constants of the -CO.O.CH2- fragment obtained by analysis of the carbonyl band in 13C NMR spectra it was found that in the liquid state the -CH2-CH2- group exists predominantly in the gauche conformational structure, and the bonds C-O-C-C assume predominantly a trans orientation. The results of the analysis of NMR and vibrational spectra were used for the structural interpretation of conformationally sensitive bands in vibrational spectra of ethylene glycol dibenzoate.

13C NMR spectra of 1-aryl-ferrocenylethylenes

1986 ◽  
Vol 51 (3) ◽  
pp. 670-676 ◽  
Author(s):  
Eva Solčániová ◽  
Štefan Toma ◽  
Tibor Liptaj
Keyword(s):  
13C Nmr ◽  
Nmr Spectra ◽  
Substituent Effects ◽  
13C Nmr Spectra ◽  
Bridge Group ◽  
C Nmr ◽  
Electron Effects

13C NMR spectra of 18 ferrocene analogues of trans stilbenes (1-aryl-2-ferrocenylethylenes) were measured. It was found that bridge group weakens the transfer of the substituent electron effects into ferrocene nucleus, especially distinctly into 3',4'positions of cyclopentadienyl ring. The transfer of substituent effects into β-position of the bridge -CH=CH- is greater in derivatives studied by us than in stilbenes. Synthesis of 1-(4-dimethylaminophenyl)-2-ferrocenylethylene is described.

The synthesis and stereochemistry of the ternary cobalt(III) complex with a stereospecific ligand derived from (S)-leucine

1986 ◽  
Vol 51 (2) ◽  
pp. 318-326 ◽  
Author(s):  
Milan Strašák ◽  
Pavol Novomeský
Keyword(s):  
Ir Spectroscopy ◽  
Aqueous Medium ◽  
Absorption Spectroscopy ◽  
Absolute Configuration ◽  
Nmr Spectra ◽  
Methyl Groups ◽  
Electron Absorption Spectroscopy ◽  
Electron Absorption ◽  
C Nmr

A new stereospecific ligand, ethylenediamine-N,N'-di(S)-α-isocapronic acid, was synthesized by condensation of (S)-leucine with 1,2-dibromoethane in alkaline aqueous medium. It follows from the 1H and 13C NMR spectra that the terminal methyl groups are chemically and magnetically nonequivalent. Of the four theoretically possible isomers of the ternary cobalt (III) complex with ethylenediamine, separation on catex yielded only one, whose absolute configuration was determined by a combination of 1H and 13C NMR, electron absorption spectroscopy and CD and IR spectroscopy.

17O and 13C NMR spectra of some geminal diacetates

1988 ◽  
Vol 53 (3) ◽  
pp. 588-592 ◽  
Author(s):  
Antonín Lyčka ◽  
Josef Jirman ◽  
Jaroslav Holeček
Keyword(s):  
13C Nmr ◽  
Nmr Spectra ◽  
Chemical Shifts ◽  
The Other ◽  
13C Nmr Spectra ◽  
Other Hand ◽  
Carboxylic Esters ◽  
C Nmr ◽  
Oxygen Atoms

The 17O and 13C NMR spectra of eight geminal diacetates RCH(O(CO)CH3)2 derived from simple aldehydes have been measured. In contrast to the dicarboxylates R1R2E(O(CO)R3)2, where E = Si, Ge, or Sn, whose 17O NMR spectra only contain a single signal, and, on the other hand, in accordance with organic carboxylic esters, the 17O NMR spectra of the compound group studied always exhibit two well-resolved signals with the chemical shifts δ(17O) in the regions of 183-219 ppm and 369-381 ppm for the oxygen atoms in the groups C-O and C=O, respectively.

Carbon-13 and nitrogen-14 NMR spectra of 1-(substituted phenyl)pyridinium salts

1980 ◽  
Vol 45 (10) ◽  
pp. 2766-2771 ◽  
Author(s):  
Antonín Lyčka
Keyword(s):  
Heavy Water ◽  
Nmr Spectra ◽  
Chemical Shifts ◽  
Coupling Constants ◽  
Pyridinium Salts ◽  
Nmr Signals ◽  
C Nmr

The 13C and 14N NMR spectra of 1M solutions of 1-(substituted phenyl)pyridinium salts (4-CH3, 4-OCH3, H, 4-Cl, 4-Br, 4-I, 3-NO2, 4-NO2, 2,4-(NO2)2 (the 13C NMR only)) have been measured in heavy water at 30 °C. The 13C and 14N chemical shifts, the 1J(CH) coupling constants, some 3J(CH) coupling constants, and values of half-widths Δ 1/2 of the 14N NMR signals are given. The 13C chemical shifts of C(4) correlate with the σ0 constants (δC(4) = (1.79 ± 0.097) σ0 + (147.67 ± 0.041)), whereas no correlation of the nitrogen chemical shifts with the σ constants has been found. The half-widths Δ 1/2 correlate with the σ0 constants (Δ 1/2 = (76.2 ± 4.9) σ0 + (106.4 ± 2.2)) except for 1-phenylpyridinium chloride.

Synthesis of the six isomeric thieno[c]-fused 1,5- and 1,6-naphthyridines

1991 ◽  
Vol 56 (11) ◽  
pp. 2340-2351 ◽  
Author(s):  
Salo Gronowitz ◽  
Johan Malm ◽  
Anna-Britta Hörnfeldt
Keyword(s):  
Nmr Spectra ◽  
Coupling Reaction ◽  
One Pot ◽  
C Nmr

trough the use of Pd(0)-catalyzed coupling between 2- and 4-formyl-3-thiopheneboronic acids and 3-amino-2-bromopyridine and 4-acetamido-3-bromopyridine, convenient one-pot procedures for the preparation of thieno[2,3-c]-1,5-naphthyridine, thieno[3,4-c]-1,5-naphthyridine, thieno-[2,3-c]-1,6-naphthyridine, and thieno[3,4-c]-1,6-naphthyridine have been developed. In order to obtain thieno[3,2-c]-1,6-naphthyridine 2-(tributylstannyl)-3-thiophene aldehyde had to be used, since the organometallic partner in the coupling reaction, 3-formyl-2-thipheneboronic acid, is too easily deboronated. The effect of silver(I) oxide and thallium(I) carbonate on the coupling was studied. 1H and 13C NMR spectra of the six isomeric thieno{c]-fused 1,5- and 1,6-naphthyridines are discussed.

Sign in / Sign up

Export Citation Format

Share Document