Hydrazonium(2+) hexafluorosilicate, N2H6SiF6: a NaCl-type structure with two-dimensional hydrogen-bonding networks

1983 ◽  
Vol 61 (1) ◽  
pp. 184-188 ◽  
Author(s):  
T. Stanley Cameron ◽  
Osvald Knop ◽  
Laura Ann MacDonald
Keyword(s):  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Bond Length ◽  
Room Temperature ◽  
Unit Cell ◽  
Type Structure ◽  
The Other ◽  
Effective Size ◽  
Two Dimensional ◽  
Hydrogen Bonding Networks

Hydrazonium(2+) hexafluorosilicate, N2H6SiF6, at room temperature has an orthorhombic (Pbca, Z = 4), pseudotetragonal unit cell (a = 7.605(1) Å, b = 7.586(2) Å, c = 8.543(1) Å). The structure consists of centrosymmetric N2H62+ and SiF62− ions arranged in a NaCl-type packing and connected by hydrogen bonds to two-dimensional N2H6–SiF6 layers parallel to (001). All H atoms are engaged in hydrogen bonding. Four of the six [Formula: see text] bonds to each cation are normal but significantly bent; the other two are trifurcated, [Formula: see text], but the out-of-layer component of the trifurcated bond is relatively unimportant. The N2H6SiF6 structure is compared in some detail with the structures of other hydrazonium(2+) salts, with particular attention to the N—N bond length, to the "effective" size of the N2H62+ ion, and to the tendency of this ion to form bent hydrogen bonds.

Polymorphs of phenazine hexacyanoferrate(II) hydrate: supramolecular isomerism in a 2D hydrogen-bonded network

2021 ◽  
Vol 77 (2) ◽  
pp. 211-218
Author(s):  
Ivica Cvrtila ◽  
Vladimir Stilinović
Keyword(s):  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Crystal Structures ◽  
The Other ◽  
Two Dimensional ◽  
Structural Motifs ◽  
Supramolecular Isomerism ◽  
Other Hand ◽  
Π Stacking ◽  
Hydrogen Bonded

The crystal structures of two polymorphs of a phenazine hexacyanoferrate(II) salt/cocrystal, with the formula (Hphen)3[H2Fe(CN)6][H3Fe(CN)6]·2(phen)·2H2O, are reported. The polymorphs are comprised of (Hphen)2[H2Fe(CN)6] trimers and (Hphen)[(phen)2(H2O)2][H3Fe(CN)6] hexamers connected into two-dimensional (2D) hydrogen-bonded networks through strong hydrogen bonds between the [H2Fe(CN)6]2− and [H3Fe(CN)6]− anions. The layers are further connected by hydrogen bonds, as well as through π–π stacking of phenazine moieties. Aside from the identical 2D hydrogen-bonded networks, the two polymorphs share phenazine stacks comprising both protonated and neutral phenazine molecules. On the other hand, the polymorphs differ in the conformation, placement and orientation of the hydrogen-bonded trimers and hexamers within the hydrogen-bonded networks, which leads to different packing of the hydrogen-bonded layers, as well as to different hydrogen bonding between the layers. Thus, aside from an exceptional number of symmetry-independent units (nine in total), these two polymorphs show how robust structural motifs, such as charge-assisted hydrogen bonding or π-stacking, allow for different arrangements of the supramolecular units, resulting in polymorphism.

1-[1-(2-Chlorophenyl)ethylidene]thiosemicarbazide

2007 ◽  
Vol 63 (3) ◽  
pp. o1160-o1161 ◽  
Author(s):  
Jian-Gang Wang ◽  
Fang-Fang Jian ◽  
Xiao-Yan Ren ◽  
Shi-Hong Kan
Keyword(s):  
Crystal Structure ◽  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Title Compound ◽  
Room Temperature ◽  
Two Dimensional ◽  
Compound C ◽  
Hydrogen Bonding Interactions

The title compound, C9H10CIN3S, was prepared by the reaction of thiosemicarbazide with 1-(2-chlorophenyl)ethanone at room temperature. The packing is stabilized by hydrogen bonds. In the crystal structure, molecules are linked into two-dimensional layers by intermolecular N—H...S hydrogen-bonding interactions.

Di- bis Pentahydrate von fünf Alkylendiaminen. Eine Fallstudie zu ein- und zweidimensionalen Wasserpolymeren in Festkörpern/Di- to Pentahydrates of Five Alkylenediamines. A Case Study of One- and Two-Dimensional Water Polymers in Solids

1999 ◽  
Vol 54 (1) ◽  
pp. 103-108 ◽  
Author(s):  
Stephanie Janeda ◽  
Dietrich Mootz
Keyword(s):  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Crystal Structures ◽  
Three Dimensional ◽  
Unit Cell ◽  
Water Molecules ◽  
Two Dimensional ◽  
Group I ◽  
Low Dimensional

The crystal structures of five low-melting hydrates of n-alkane-α,ω-diamines, H2N(CH2)nNH2 · x H2O, for short Cn · x W, have been determined. As a common feature, the water molecules are mutually linked by hydrogen bonds O-H· · ·O to form low-dimensional polymers. These are a meandering chain in C2 · 2 W (space group I 2/a, Z = 4 formula units per unit cell), a zig zag chain in C6 · 2 W (P 21/c, Z = 2), a ribbon of consecutively condensed five-membered rings in C3 · 3 W (P 21/c, Z = 4) and a layer of condensed and spiro-linked rings of varying size each in C7 · 3 W (P 1̄, Z = 4) and C4 · 5 W (C 2/c, Z = 4). Further hydrogen bonding, between the water polymers and the bifunctional amine molecules, leads to overall connectivities which are three-dimensional in each structure.

scholarly journals Crystal structure of the new hybrid material bis(1,4-diazoniabicyclo[2.2.2]octane) di-μ-chlorido-bis[tetrachloridobismuthate(III)] dihydrate

2015 ◽  
Vol 71 (11) ◽  
pp. 1384-1387
Author(s):  
Marwen Chouri ◽  
Habib Boughzala
Keyword(s):  
Crystal Structure ◽  
Aqueous Solution ◽  
Hydrogen Bonds ◽  
Room Temperature ◽  
Molar Ratio ◽  
Water Molecules ◽  
Site Symmetry ◽  
Two Dimensional ◽  
Slow Evaporation ◽  
Solution Ph

The title compound bis(1,4-diazoniabicyclo[2.2.2]octane) di-μ-chlorido-bis[tetrachloridobismuthate(III)] dihydrate, (C6H14N2)2[Bi2Cl10]·2H2O, was obtained by slow evaporation at room temperature of a hydrochloric aqueous solution (pH = 1) containing bismuth(III) nitrate and 1,4-diazabicyclo[2.2.2]octane (DABCO) in a 1:2 molar ratio. The structure displays a two-dimensional arrangement parallel to (100) of isolated [Bi2Cl10]4−bioctahedra (site symmetry -1) separated by layers of organic 1,4-diazoniabicyclo[2.2.2]octane dications [(DABCOH2)2+] and water molecules. O—H...Cl, N—H...O and N—H...Cl hydrogen bonds lead to additional cohesion of the structure.

scholarly journals Two New Polyiodides in the 4,4´-Bipyridinium Diiodide/Iodine System

2012 ◽  
Vol 67 (1) ◽  
pp. 5-10
Author(s):  
Guido J. Reiss ◽  
Martin van Megen
Keyword(s):  
Hydrogen Bonding ◽  
Hydrogen Bonds ◽  
Complex I ◽  
The Other ◽  
Cyclic Dimer ◽  
Water Molecules ◽  
Spectroscopic Methods ◽  
Halogen Bonds ◽  
One Dimensional ◽  
Hydroiodic Acid

The reaction of bipyridine with hydroiodic acid in the presence of iodine gave two new polyiodide-containing salts best described as 4,4´-bipyridinium bis(triiodide), C10H10N2[I3]2, 1, and bis(4,4´-bipyridinium) diiodide bis(triiodide) tris(diiodine) solvate dihydrate, (C10H10N2)2I2[I3]2 · 3 I2 ·2H2O, 2. Both compounds have been structurally characterized by crystallographic and spectroscopic methods (Raman and IR). Compound 1 is composed of I3 − anions forming one-dimensional polymers connected by interionic halogen bonds. These chains run along [101] with one crystallographically independent triiodide anion aligned and the other triiodide anion perpendicular to the chain direction. There are no classical hydrogen bonds present in 1. The structure of 2 consists of a complex I144− anion, 4,4´-bipyridinium dications and hydrogen-bonded water molecules in the ratio of 1 : 2 : 2. The I144− polyiodide anion is best described as an adduct of two iodide and two triiodide anions and three diiodine molecules. Two 4,4´-bipyridinium cations and two water molecules form a cyclic dimer through N-H· · ·O hydrogen bonds. Only weak hydrogen bonding is found between these cyclic dimers and the polyiodide anions.

Hydrogen-bonding networks of purine derivatives and their bilayers for guest intercalation

CrystEngComm ◽  
2016 ◽  
Vol 18 (1) ◽  
pp. 62-67
Author(s):  
Yoona Jang ◽  
Seo Yeon Yoo ◽  
Hye Rin Gu ◽  
Yu Jin Lee ◽  
Young Shin Cha ◽  
...  
Keyword(s):  
Hydrogen Bonding ◽  
Two Dimensional ◽  
Purine Derivatives ◽  
Guest Molecules ◽  
Π Interactions ◽  
Hydrogen Bonding Networks ◽  
Hydrogen Bonded

6-Chloro-9-propyl-purin-2-amine (pr-GCl) forms two-dimensional hydrogen-bonded networks which in turn stack via π–π interactions, leading to the formation of bilayers that can accommodate organic guest molecules.

scholarly journals Crystal structure of the co-crystalline adduct 1,3,6,8-tetraazatricyclo[4.4.1.13,8]dodecane (TATD)–4-bromophenol (1/2)

2015 ◽  
Vol 71 (5) ◽  
pp. 463-465 ◽  
Author(s):  
Augusto Rivera ◽  
Juan Manuel Uribe ◽  
Jicli José Rojas ◽  
Jaime Ríos-Motta ◽  
Michael Bolte
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Hydrogen Bonds ◽  
Rotation Axis ◽  
The Other ◽  
Two Dimensional ◽  
Asymmetric Unit ◽  
Species Association ◽  
Crystalline Adduct ◽  
Aminal Cage

The structure of the 1:2 co-crystalline adduct C8H16N4·2C6H5BrO, (I), from the solid-state reaction of 1,3,6,8-tetraazatricyclo[4.4.1.13,8]dodecane (TATD) and 4-bromophenol, has been determined. The asymmetric unit of the title co-crystalline adduct comprises a half molecule of aminal cage polyamine plus a 4-bromophenol molecule. A twofold rotation axis generates the other half of the adduct. The primary inter-species association in the title compound is through two intermolecular O—H...N hydrogen bonds. In the crystal, the adducts are linked by weak non-conventional C—H...O and C—H...Br hydrogen bonds, giving a two-dimensional supramolecular structure parallel to thebcplane.

Er5Re2C7, Tm5Re2C7, and Lu5Re2C7 with Sc5Re2C7 Type, and Yb2ReC2 with Pr2ReC2 Type Structures

1997 ◽  
Vol 52 (2) ◽  
pp. 231-236 ◽  
Author(s):  
R. Pöttgen ◽  
K. H. Wachtmann ◽  
W. Jeitschko ◽  
A. Lang ◽  
T. Ebel
Keyword(s):  
Magnetic Susceptibility ◽  
Bond Length ◽  
High Frequency ◽  
Annealing Process ◽  
Type Structure ◽  
The Other ◽  
Variable Parameters ◽  
X Ray ◽  
Arc Melting ◽  
Structure Factors

Abstract Er5Re2C7, Tm5Re2C7, and Lu5Re2C7 were prepared by arc-melting of the elemental components and subsequent annealing at 800 °C. Er5Re2C7 forms only after the annealing process, whereas the other two carbides were already present in the as cast samples. They crystallize with a Sc5Re2C7 type structure, which was refined from single-crystal X-ray data of Lu5Re2C7: Cmmm, a = 791.44(5), b = 1418.08(8), c = 332.79(2) pm, Z = 2, R = 0.037 for 544 structure factors and 21 variable parameters. The structure contains linear centrosymmetric C3 units with a C-C bond length of 133(2) pm and isolated carbon atoms in octahedral coordination of four lutetium and two rhenium atoms. The rhenium atoms within the two-dimensionally infinite polymeric sheets [Re2C4]n are electronically saturated as is indicated by the diamagnetism and the semiconductivity of this carbide. Yb2ReC2 was prepared by reacting the elements in a sealed tantalum tube with a high-frequency furnace. It crystallizes with a Pr2ReC2 type structure: Pnma, a = 645.91(6), b = 498.64(6), and c = 966.05(6) pm. Magnetic susceptibility measurements indicate the ytterbium atoms to be trivalent in this compound.

A study of α -resorcinol by neutron diffraction

1956 ◽  
Vol 235 (1203) ◽  
pp. 552-559 ◽  
Keyword(s):  
Hydrogen Bonds ◽  
Neutron Diffraction ◽  
Oxygen Atom ◽  
Neutron Scattering ◽  
Benzene Ring ◽  
Unit Cell ◽  
The Other ◽  
Aromatic Molecule ◽  
Hydrogen Atoms ◽  
A Value

The first study of an aromatic molecule by neutron diffraction, leading to a Fourier projection of the neutron scattering density in the unit cell, gives a value of 1·08 ± 0·04 Å for the length of the C—H bonds which link hydrogen atoms to the benzene ring. The spirals of hydrogen bonds which bind together neighbouring molecules are found to consist of typical ‘long bonds’, with the proton much closer to one oxygen atom than to the other. The O—H distance is 1·02 Å, and it appears that the O, H, O atoms are not collinear.

New aspects of porphyrins and related compounds: self-assembled structures in two-dimensional molecular arrays

2009 ◽  
Vol 13 (01) ◽  
pp. 22-34 ◽  
Author(s):  
Katsuhiko Ariga ◽  
Jonathan P. Hill ◽  
Yutaka Wakayama ◽  
Misaho Akada ◽  
Esther Barrena ◽  
...  
Keyword(s):  
Hydrogen Bonding ◽  
Molecular Design ◽  
Molecular Level ◽  
Two Dimensional ◽  
Level Control ◽  
Phase Boundaries ◽  
Structures And Properties ◽  
Array Structures ◽  
Hydrogen Bonding Networks ◽  
Related Compounds

The advanced state of development of molecular design and synthetic chemistry of porphyrins and related molecules makes these compounds good candidates for technological appli cations, in which well characterized and designed structures and properties are required. In particular, 2-dimensional molecular level control of porphyrin array structures should reveal new aspects of nanotechnology. In this review, recent research on porphyrin assemblies, including 2-dimensional porphyrin arrays, is described with emphasis on phenol- and quinone-substituted tetrapyrrole units. A series of research aimed at developing strategies for preparation of porphyrin molecular arrays, where several novel aspects of molecular arrays, including phase transitions, ordered 2-D phase boundaries, and hydrogen-bonding networks, are introduced.

Sign in / Sign up

Export Citation Format

Share Document