Fluorosulfates of palladium. Part 3. The tetrakis(fluorosulfato)palladate(II) ion

1981 ◽  
Vol 59 (19) ◽  
pp. 2835-2838 ◽  
Author(s):  
Keith C. Lee ◽  
Friedhelm Aubke
Keyword(s):  
Sulfur Dioxide ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Liquid Sulfur ◽  
Square Planar ◽  
Planar Environment

The reduction of ternary fluorosulfato complexes of palladium(IV) like cesium hexakis(fluorosulfato)palladate(IV) by bromine in liquid sulfur dioxide at room temperature or at slightly elevated temperatures results in the formation of cesium tetrakis(fluorosulfato)palladate(II), according to:[Formula: see text]In contrast to all previously reported palladium(II) fluorosulfato derivatives, Pd2+ is found in a square planar environment resulting in diamagnetism.

The Formation of Sulfur from Hydrogen Sulfide and Sulfur Dioxide. A Contribution to the Vulcanization Process of Peachey

1934 ◽  
Vol 7 (4) ◽  
pp. 637-640
Author(s):  
Lothar Hock ◽  
Hans Schmidt
Keyword(s):  
Hydrogen Sulfide ◽  
Sulfur Dioxide ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Decisive Role ◽  
The Other ◽  
General Reaction ◽  
Series Of Experiments ◽  
Vulcanization Process ◽  
Insight Into

Abstract In the reduction of sulfur dioxide by hydrogen sulfide, the course of the reaction depends wholly upon whether water is present or the gases are dry. With water present, there is a ready separation of sulfur, even at room temperature, according to the general reaction: SO2+2H2S→3S+2H2O, though accompanied by more complicated reactions involving the formation of polythionic acids. On the contrary at room temperature the dried gases do not react, and only at elevated temperatures do they give rise to sulfur and water vapor, in which case because the reaction is exothermic the equilibrium is displaced more and more toward the original sulfur dioxide and hydrogen sulfide. Conversely then, the formation of free sulfur is favored by lowering the temperature. The heat of activation of the reaction is however so great, even at room temperature, that the rate of the reaction is imperceptibly small, and accordingly no reaction is observable. In the presence of rubber, on the other hand, conditions are extremely favorable for activation, because the rubber hydrocarbon plays the part of an acceptor of the liberated sulfur and is vulcanized by it, as Peachey and Skipsey were able to show in their well-known work. The question then arises whether, in this form of vulcanization, the water which is already present or which is formed plays a decisive role in starting and continuing the reaction (in which case the formation of polythionic acids might also play a part), or whether the essential reaction takes place between the two gases in the dry state, in which case the reaction progresses in a much more unrestrained way than in the absence of substances which activate the reaction. In view of this, two series of experiments were planned with the object of obtaining a better insight into the reaction. In one series the rate of the reaction with both gases in the dry state was studied by some trial measurements only; in the other series the part played by moisture in vulcanization by the Peachey process and in the vulcanization of rubber swollen in benzene was investigated.

Mechanical Properties and Dislocation Structure of Single Crystal Cdte Deformed in Compression at 300°C

1976 ◽  
Vol 34 ◽  
pp. 592-593
Author(s):  
Ernest L. Hall ◽  
J. B. Vander Sande
Keyword(s):  
Mechanical Properties ◽  
Single Crystal ◽  
Dislocation Structure ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Strain Curve ◽  
Optical Devices ◽  
Semiconductor Compound ◽  
Wide Range ◽  
Sample Orientation

The present paper describes research on the mechanical properties and related dislocation structure of CdTe, a II-VI semiconductor compound with a wide range of uses in electrical and optical devices. At room temperature CdTe exhibits little plasticity and at the same time relatively low strength and hardness. The mechanical behavior of CdTe was examined at elevated temperatures with the goal of understanding plastic flow in this material and eventually improving the room temperature properties. Several samples of single crystal CdTe of identical size and crystallographic orientation were deformed in compression at 300°C to various levels of total strain. A resolved shear stress vs. compressive glide strain curve (Figure la) was derived from the results of the tests and the knowledge of the sample orientation.

Spherulite Structures in a Melt Spun Fe-Ni Austenitic Steel

1985 ◽  
Vol 43 ◽  
pp. 52-53
Author(s):  
G. M. Michal ◽  
T. K. Glasgow ◽  
T. J. Moore
Keyword(s):  
Austenitic Steel ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Large Range ◽  
Amorphous Structure ◽  
Nucleation And Growth ◽  
Ni Alloys ◽  
Melt Spun ◽  
Crystal Fibers ◽  
Rapidly Solidified

Large additions of B to Fe-Ni alloys can lead to the formation of an amorphous structure, if the alloy is rapidly cooled from the liquid state to room temperature. Isothermal aging of such structures at elevated temperatures causes crystallization to occur. Commonly such crystallization pro ceeds by the nucleation and growth of spherulites which are spherical crystalline bodies of radiating crystal fibers. Spherulite features were found in the present study in a rapidly solidified alloy that was fully crysstalline as-cast. This alloy was part of a program to develop an austenitic steel for elevated temperature applications by strengthening it with TiB2. The alloy contained a relatively large percentage of B, not to induce an amorphous structure, but only as a consequence of trying to obtain a large volume fracture of TiB2 in the completely processed alloy. The observation of spherulitic features in this alloy is described herein. Utilization of the large range of useful magnifications obtainable in a modern TEM, when a suitably thinned foil is available, was a key element in this analysis.

FANSTEEL 85 METAL

Alloy Digest ◽  
1981 ◽  
Vol 30 (6) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Creep Strength ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Bend Strength ◽  
Temperature Performance

Abstract FANSTEEL 85 METAL is a columbium-base alloy characterized by good fabricability at room temperature, good weldability and a good combination of creep strength and oxidation resistance at elevated temperatures. Its applications include missile and rocket components and many other high-temperature parts. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cb-7. Producer or source: Fansteel Metallurgical Corporation. Originally published December 1963, revised June 1981.

The Reactivity of Different Active Forms of Sodium Carbonate with Respect to Sulfur Dioxide

1992 ◽  
Vol 57 (11) ◽  
pp. 2302-2308
Author(s):  
Karel Mocek ◽  
Erich Lippert ◽  
Emerich Erdös
Keyword(s):  
Thermal Decomposition ◽  
Liquid Phase ◽  
Sulfur Dioxide ◽  
Specific Surface ◽  
Surface Area ◽  
Sodium Carbonate ◽  
Room Temperature ◽  
Active Form ◽  
The Other ◽  
Kinetics Of

The kinetics of the reaction of solid sodium carbonate with sulfur dioxide depends on the microstructure of the solid, which in turn is affected by the way and conditions of its preparation. The active form, analogous to that obtained by thermal decomposition of NaHCO3, emerges from the dehydration of Na2CO3 . 10 H2O in a vacuum or its weathering in air at room temperature. The two active forms are porous and have approximately the same specific surface area. Partial hydration of the active Na2CO3 in air at room temperature followed by thermal dehydration does not bring about a significant decrease in reactivity. On the other hand, if the preparation of anhydrous Na2CO3 involves, partly or completely, the liquid phase, the reactivity of the product is substantially lower.

Strong Coupling: Polariton Bose Condensation

2017 ◽  
Author(s):  
Alexey V. Kavokin ◽  
Jeremy J. Baumberg ◽  
Guillaume Malpuech ◽  
Fabrice P. Laussy
Keyword(s):  
Strong Coupling ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Dissipative System ◽  
Bose Condensation ◽  
Einstein Condensation ◽  
Strong Coupling Regime ◽  
Stimulated Scattering ◽  
Exciton Polaritons ◽  
Bose Einstein

In this Chapter we address the physics of Bose-Einstein condensation and its implications to a driven-dissipative system such as the polariton laser. We discuss the dynamics of exciton-polaritons non-resonantly pumped within a microcavity in the strong coupling regime. It is shown how the stimulated scattering of exciton-polaritons leads to formation of bosonic condensates that may be stable at elevated temperatures, including room temperature.

scholarly journals Understanding Sulfur Redox Mechanisms in Different Electrolytes for Room-Temperature Na–S Batteries

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Hanwen Liu ◽  
Wei-Hong Lai ◽  
Qiuran Yang ◽  
Yaojie Lei ◽  
Can Wu ◽  
...  
Keyword(s):  
Room Temperature ◽  
High Surface ◽  
Reversible Capacity ◽  
High Loading ◽  
Side Reactions ◽  
Liquid Sulfur ◽  
Shuttle Effect ◽  
Loading Ratio ◽  
Solid Liquid ◽  
Sulfur Cathodes

Abstract This work reports influence of two different electrolytes, carbonate ester and ether electrolytes, on the sulfur redox reactions in room-temperature Na–S batteries. Two sulfur cathodes with different S loading ratio and status are investigated. A sulfur-rich composite with most sulfur dispersed on the surface of a carbon host can realize a high loading ratio (72% S). In contrast, a confined sulfur sample can encapsulate S into the pores of the carbon host with a low loading ratio (44% S). In carbonate ester electrolyte, only the sulfur trapped in porous structures is active via ‘solid–solid’ behavior during cycling. The S cathode with high surface sulfur shows poor reversible capacity because of the severe side reactions between the surface polysulfides and the carbonate ester solvents. To improve the capacity of the sulfur-rich cathode, ether electrolyte with NaNO3 additive is explored to realize a ‘solid–liquid’ sulfur redox process and confine the shuttle effect of the dissolved polysulfides. As a result, the sulfur-rich cathode achieved high reversible capacity (483 mAh g−1), corresponding to a specific energy of 362 Wh kg−1 after 200 cycles, shedding light on the use of ether electrolyte for high-loading sulfur cathode.

On the use of Ozawa/Flynn/Wall method to determine aging activation energy for elastomers

2021 ◽  
pp. 009524432110203
Author(s):  
Sudhir Bafna
Keyword(s):  
Mechanical Properties ◽  
Activation Energy ◽  
Weight Loss ◽  
Oxygen Consumption ◽  
Dwell Time ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Degradation Mechanism ◽  
Kinetics Of ◽  
Wall Method

It is often necessary to assess the effect of aging at room temperature over years/decades for hardware containing elastomeric components such as oring seals or shock isolators. In order to determine this effect, accelerated oven aging at elevated temperatures is pursued. When doing so, it is vital that the degradation mechanism still be representative of that prevalent at room temperature. This places an upper limit on the elevated oven temperature, which in turn, increases the dwell time in the oven. As a result, the oven dwell time can run into months, if not years, something that is not realistically feasible due to resource/schedule constraints in industry. Measuring activation energy (Ea) of elastomer aging by test methods such as tensile strength or elongation, compression set, modulus, oxygen consumption, etc. is expensive and time consuming. Use of kinetics of weight loss by ThermoGravimetric Analysis (TGA) using the Ozawa/Flynn/Wall method per ASTM E1641 is an attractive option (especially due to the availability of commercial instrumentation with software to make the required measurements and calculations) and is widely used. There is no fundamental scientific reason why the kinetics of weight loss at elevated temperatures should correlate to the kinetics of loss of mechanical properties over years/decades at room temperature. Ea obtained by high temperature weight loss is almost always significantly higher than that obtained by measurements of mechanical properties or oxygen consumption over extended periods at much lower temperatures. In this paper, data on five different elastomer types (butyl, nitrile, EPDM, polychloroprene and fluorocarbon) are presented to prove that point. Thus, use of Ea determined by weight loss by TGA tends to give unrealistically high values, which in turn, will lead to incorrectly high predictions of storage life at room temperature.

Effects of Elevated Temperatures on the Compressive Strength of HFCC

2011 ◽  
Vol 261-263 ◽  
pp. 416-420 ◽  
Author(s):  
Fu Ping Jia ◽  
Heng Lin Lv ◽  
Yi Bing Sun ◽  
Bu Yu Cao ◽  
Shi Ning Ding
Keyword(s):  
Compressive Strength ◽  
Elevated Temperature ◽  
Fly Ash ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Relative Strength ◽  
Ordinary Concrete ◽  
Residual Compressive Strength ◽  
Fly Ash Concrete ◽  
The Relationship

This paper presents the results of elevated temperatures on the compressive of high fly ash content concrete (HFCC). The specimens were prepared with three different replacements of cement by fly ash 30%, 40% and 50% by mass and the residual compressive strength was tested after exposure to elevated temperature 250, 450, 550 and 650°C and room temperature respectively. The results showed that the compressive strength apparently decreased with the elevated temperature increased. The presence of fly ash was effective for improvement of the relative strength, which was the ratio of residual compressive strength after exposure to elevated temperature and ordinary concrete. The relative compressive strength of fly ash concrete was higher than those of ordinary concrete. Based on the experiments results, the alternating simulation formula to determine the relationship among relative strength, elevated temperature and fly ash replacement is developed by using regression of results, which provides the theoretical basis for the evaluation and repair of HFCC after elevated temperature.

Sign in / Sign up

Export Citation Format

Share Document