Octahedral–tetrahedral equilibria in aqueous cobalt(II) solutions at high temperatures

1980 ◽  
Vol 58 (14) ◽  
pp. 1418-1426 ◽  
Author(s):  
Thomas Wilson Swaddle ◽  
Leonard Fabes
Keyword(s):  
Sulfuric Acid ◽  
High Temperature ◽  
Absorption Band ◽  
High Temperatures ◽  
Intensity Ratio ◽  
Hydrogen Sulfate ◽  
Sulfate Ion ◽  
Acidic Media ◽  
Visible Absorption ◽  
Upper Limits

Evidence is presented to indicate that aqueous Co2+ exists as the hexaaquo-ion in equilibrium with minor amounts (upper limits 0.08% at 298 K, 7% at 625 K, at 16–25 MPa) of tetraaquocobalt(II), with ΔH ~ +17 kJ mol−1. The single visible absorption band of the supposed Co(H2O)42+ has maxima at 552 nm and 486 nm in the intensity ratio 2:1. Hydrogen sulfate ion (up to 0.5 M at least) does not complex Co2+(aq) detectably in acidic media, 290–625 K, and sulfuric acid therefore holds promise as a non-complexing strong monobasic acid for high-temperature aqueous studies. In water containing 2.0 M or more Cl−, the tetrahedral form of cobalt(II) is CoCl42−, ΔH for the octahedral → tetrahedral equilibrium being +62 kJ mol−1; forCoBr42−, the corresponding ΔH is +70 kJ mol−1, the greater endothermicity accounting entirely for the lower stability relative to CoCl42−.

High Temperature n- and p-type Doped Microcrystalline Silicon Layers Grown by VHF PECVD Layer-by-Layer Deposition

2003 ◽  
Vol 762 ◽  
Author(s):  
A. Gordijn ◽  
J.K. Rath ◽  
R.E.I. Schropp
Keyword(s):  
Activation Energy ◽  
High Temperature ◽  
High Temperatures ◽  
Continuous Wave ◽  
Hydrogen Plasma ◽  
Silicon Layer ◽  
Dark Conductivity ◽  
High Deposition Rate ◽  
Layer By Layer ◽  
Microcrystalline Silicon

AbstractDue to the high temperatures used for high deposition rate microcrystalline (μc-Si:H) and polycrystalline silicon, there is a need for compact and temperature-stable doped layers. In this study we report on films grown by the layer-by-layer method (LbL) using VHF PECVD. Growth of an amorphous silicon layer is alternated by a hydrogen plasma treatment. In LbL, the surface reactions are separated time-wise from the nucleation in the bulk. We observed that it is possible to incorporate dopant atoms in the layer, without disturbing the nucleation. Even at high substrate temperatures (up to 400°C) doped layers can be made microcrystalline. At these temperatures, in the continuous wave case, crystallinity is hindered, which is generally attributed to the out-diffusion of hydrogen from the surface and the presence of impurities (dopants).We observe that the parameter window for the treatment time for p-layers is smaller compared to n-layers. Moreover we observe that for high temperatures, the nucleation of p-layers is more adversely affected than for n-layers. Thin, doped layers have been structurally, optically and electrically characterized. The best n-layer made at 400°C, with a thickness of only 31 nm, had an activation energy of 0.056 eV and a dark conductivity of 2.7 S/cm, while the best p-layer made at 350°C, with a thickness of 29 nm, had an activation energy of 0.11 V and a dark conductivity of 0.1 S/cm. The suitability of these high temperature n-layers has been demonstrated in an n-i-p microcrystalline silicon solar cell with an unoptimized μc-Si:H i-layer deposited at 250°C and without buffer. The Voc of the cell is 0.48 V and the fill factor is 70 %.

NICROFER 5520 Co

Alloy Digest ◽  
1995 ◽  
Vol 44 (3) ◽  
Keyword(s):  
High Temperature ◽  
Chemical Composition ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
High Temperature Corrosion ◽  
Creep Properties ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract NICROFER 5520 Co is a nickel-chromium-cobalt-molybdenum alloy with excellent strength and creep properties up to high temperatures. Due to its balanced chemical composition the alloy shows outstanding resistance to high temperature corrosion in the form of oxidation and carburization. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-480. Producer or source: VDM Technologies Corporation.

CARLSON ALLOY C601

Alloy Digest ◽  
1994 ◽  
Vol 43 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
High Temperatures ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Resistance To Stress ◽  
Extended Exposure ◽  
Sulfur Containing

Abstract Carlson Alloy C601 is characterized by high tensile, yield and creep-rupture strengths for high temperature service. The alloy is not embrittled by extended exposure to high temperatures and has excellent resistance to stress-corrosion cracking, to carburizing, nitriding and sulfur containing environments. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ni-458. Producer or source: G.O. Carlson Inc.

REVERE No. 430

Alloy Digest ◽  
1958 ◽  
Vol 7 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance

Abstract REVERE No. 430 is an aluminum bronze having high strength, excellent corrosion resistance, and high resistance to sulfuric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-63. Producer or source: Revere Copper and Brass Inc..

INCOTHERM TD

Alloy Digest ◽  
2005 ◽  
Vol 54 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
High Temperatures ◽  
Rare Earths ◽  
Temperature Performance

Abstract Incotherm TD is a thermocouple-sheathing alloy with elements of silicon and rare earths to enhance oxidation resistance at high temperatures. This datasheet provides information on composition, physical properties, and tensile properties as well as deformation. It also includes information on high temperature performance and corrosion resistance as well as forming. Filing Code: Ni-628. Producer or source: Special Metals Corporation.

HASTELLOY ALLOY X

Alloy Digest ◽  
1954 ◽  
Vol 3 (12) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
High Temperatures ◽  
Heat Treating ◽  
Operating Conditions ◽  
Molybdenum Alloy ◽  
High Temperature Strength ◽  
Nickel Chromium

Abstract HASTELLOY Alloy X is a nickel-chromium-iron-molybdenum alloy recommended for high-temperature applications. It has outstanding oxidation resistance at high temperatures under most operating conditions, and good high-temperature strength. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on forming, heat treating, and machining. Filing Code: Ni-14. Producer or source: Haynes Stellite Company.

KUBOTA ALLOY HT

Alloy Digest ◽  
2011 ◽  
Vol 60 (11) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Oxidation Resistance ◽  
High Temperatures ◽  
Temperature Performance ◽  
Iron Chromium

Abstract Kubota Alloy HT is an iron-chromium-nickel alloy that has both strength and oxidation resistance at high temperatures. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance as well as casting and joining. Filing Code: SS-1108. Producer or source: Kubota Metal Corporation, Fahramet Division.

KENTANIUM K138A

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
High Temperature ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Engineering Design ◽  
High Temperatures

Abstract Kentanium K138-A is a high temperature titanium carbide that greatly widens the scope of the engineering design where conditions of intermittent or continuous high temperatures in oxidizing atmospheres are combined with abrasion, and compressive or tensile loads. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness, creep, and fatigue. It also includes information on machining and joining. Filing Code: Ti-40. Producer or source: Kennametal Inc..

TIMETAL 35A

Alloy Digest ◽  
2001 ◽  
Vol 50 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
High Temperature ◽  
Nitric Acid ◽  
Physical Properties ◽  
Chlorine Dioxide ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance ◽  
Sodium And Potassium

Abstract Titanium shows outstanding resistance to seawater and marine atmospheres. It is also resistant to attack by hot metallic chloride solutions, sodium and potassium hypochlorite, and chlorine dioxide. The metal is resistant to attack by hot nitric acid at concentrations up to 80% and is not attacked by sulfuric acid. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: TI-122. Producer or source: Timet.

Sign in / Sign up

Export Citation Format

Share Document