Fluidities and conductances of glass-forming melts of cadmium nitrate tetrahydrate and transition metal chlorides

1978 ◽  
Vol 56 (9) ◽  
pp. 1231-1235 ◽  
Author(s):  
N. Islam ◽  
S. Kumar ◽  
K. P. Singh

The temperature dependences of fluidifies and equivalent conductances of Cd(NO3)2•4.1H2O–(Ni/Co)Cl2 melts have been explained in terms of Vogel–Tammann–Fulcher and Adam–Gibbs equations. The differences in the values of the glass transition temperatures and the preexponential factors corresponding to the Ni2+ and Co2+ melts were attributed to the differences in the masses of the two Systems. The linear decrease and increase observed in the values of the preexponential factor and the glass transition temperature, respectively, with increasing concentration of the solute were discussed. The overall composition dependences of transport properties were analyzed using expressions derived on the basis of both the above equations.

1983 ◽  
Vol 48 (6) ◽  
pp. 1558-1563
Author(s):  
Jarmila Malá ◽  
Ivo Sláma

The glass-forming composition region of the CaCl2-H2O-DMSO system has been established, and the glass transition temperatures of the mixtures have been determined as a function of the CaCl2 content at a constant DMSO mole fraction in the mixed solvent. The dependence of the glass transition temperature on the CaCl2 mole fraction at a constant mole fraction of DMSO in the mixed solvent can be described by a linear relationship.


Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 954
Author(s):  
Xavier Monnier ◽  
Sara Marina ◽  
Xabier Lopez de Pariza ◽  
Haritz Sardón ◽  
Jaime Martin ◽  
...  

The present work aims to provide insights on recent findings indicating the presence of multiple equilibration mechanisms in physical aging of glasses. To this aim, we have investigated a glass forming polyether, poly(1-4 cyclohexane di-methanol) (PCDM), by following the evolution of the enthalpic state during physical aging by fast scanning calorimetry (FSC). The main results of our study indicate that physical aging persists at temperatures way below the glass transition temperature and, in a narrow temperature range, is characterized by a two steps evolution of the enthalpic state. Altogether, our results indicate that the simple old-standing view of physical aging as triggered by the α relaxation does not hold true when aging is carried out deep in the glassy state.


2014 ◽  
Vol 887-888 ◽  
pp. 97-100
Author(s):  
Xiao Lan Hu ◽  
Xi Lan ◽  
Teng Fei Lu ◽  
Hong Shan Yang ◽  
Ying Lai Yang

An acrylate resin copolymerized with epoxy and amino resin was prepared in this paper, and its polyhedral oligomeric silsesquioxane (POSS) modified nanocomposites were fabricated via physical blending. Results showed that glass transition temperature of the acrylate copolymer was about 7.9 oC via DSC. Dispersion of nanocomposites with aminopropyllsobutyl POSS is better than those with Octalsobutyl POSS. Moreover, glass transition temperatures of the nanocomposites with POSS are close to the acrylate copolymer matrix.


Pharmaceutics ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 425 ◽  
Author(s):  
Edueng ◽  
Bergström ◽  
Gråsjö ◽  
Mahlin

This study shows the importance of the chosen method for assessing the glass-forming ability (GFA) and glass stability (GS) of a drug compound. Traditionally, GFA and GS are established using in situ melt-quenching in a differential scanning calorimeter. In this study, we included 26 structurally diverse glass-forming drugs (i) to compare the GFA class when the model drugs were produced by spray-drying with that when melt-quenching was used, (ii) to investigate the long-term physical stability of the resulting amorphous solids, and (iii) to investigate the relationship between physicochemical properties and the GFA of spray-dried solids and their long-term physical stability. The spray-dried solids were exposed to dry (<5% RH) and humid (75% RH) conditions for six months at 25 °C. The crystallization of the spray-dried solids under these conditions was monitored using a combination of solid-state characterization techniques including differential scanning calorimetry, Raman spectroscopy, and powder X-ray diffraction. The GFA/GS class assignment for 85% of the model compounds was method-dependent, with significant differences between spray-drying and melt-quenching methods. The long-term physical stability under dry condition of the compounds was predictable from GFA/GS classification and glass transition and crystallization temperatures. However, the stability upon storage at 75% RH could not be predicted from the same data. There was no strong correlation between the physicochemical properties explored and the GFA class or long-term physical stability. However, there was a slight tendency for compounds with a relatively larger molecular weight, higher glass transition temperature, higher crystallization temperature, higher melting point and higher reduced glass transition temperature to have better GFA and better physical stability. In contrast, a high heat of fusion and entropy of fusion seemed to have a negative impact on the GFA and physical stability of our dataset.


1991 ◽  
Vol 239 ◽  
Author(s):  
P. H. Townsend ◽  
B. S. Huber ◽  
D. S. Wang

ABSTRACTWafer bending measurements have been used to study the glass transition temperature, Tg, of thin coatings of polystyrene and polycarbonate on Si wafers. The observed values of Tg agree with DSC and TMA measurements on bulk samples. The evolution of the substrate curvature has been used to examine the behavior of Tg in thin epoxy films and coatings derived from divinylsiloxane bisbenzocyclobutene, mixed stereo and positional isomers of 1, 3-bis(2-bicyclo[4.2.0]octa-1, 3, 5-trien-3-ylethenyl)-1, 1, 3, 3-tetramethyl disitoxane (CAS 117732–87–3). The dependence of the Tg of the epoxide coatings is studied as a function of the cross-linking. The evolution of the Tg in the benzocyclobutene coating is found to be a monotonie function of the level of conversion of the polymer network.


2020 ◽  
Vol 22 (32) ◽  
pp. 17948-17959
Author(s):  
Hubert Hellwig ◽  
Andrzej Nowok ◽  
Jan Grzegorz Małecki ◽  
Piotr Kuś ◽  
Agnieszka Jędrzejowska ◽  
...  

The dielectric properties, glass transition temperature and molecular dynamics of thiacrown ethers are strongly dependent on the thiacrown ring type.


Sign in / Sign up

Export Citation Format

Share Document