Rate of addition of bromine atoms to ethylene

1970 ◽  
Vol 48 (15) ◽  
pp. 2426-2429 ◽  
Author(s):  
K. T. Wong ◽  
D. A. Armstrong
Keyword(s):  
Rate Constant ◽  
Rate Constants ◽  
Kinetic Data ◽  
Addition Reactions

The rate of combination of bromine atoms in the photosensitized hydrobromination of ethylene has been determined by the rotating sector technique. From this and kinetic data reported previously the rate constant for the addition of bromine atoms to ethylene in the presence of 380 Torr of propane as deactivating gas has been calculated to be 1.5 ± 0.3 × 10−14 cm3 molecule−1 s−1, independent of temperature in the range 15 to 35 °C. This result is discussed and compared with rate constants for other addition reactions to ethylene.

Spectroscopic studies of the interaction of cobalt(II) N,N',N″,N‴-tetramethyltetra-3,4-pyridinoporphyrazine with amino acids and nitrogen oxides

2001 ◽  
Vol 05 (12) ◽  
pp. 839-845 ◽  
Author(s):  
MAMOTHIBE A. THAMAE ◽  
TEBELLO NYOKONG
Keyword(s):  
Nitric Oxide ◽  
Amino Acids ◽  
Nitrogen Oxides ◽  
Equilibrium Constant ◽  
Rate Constant ◽  
Rate Constants ◽  
Kinetic Data ◽  
Spectroscopic Studies

The interaction of histidine, cysteine, NO and nitrite with cobalt(II) N,N',N″,N‴-tetramethyltetra-3,4-tetrapyridinoporphyrazine ([ Co II tmtppa ]4+) is reported. Metal-based autoreduction of [ Co II tmtppa ]4+ occurs with the formation of the [ Co I tmtppa (-2)]3+ species in the presence of histidine and cysteine. Kinetic data for the auto reduction of [ Co II tmtppa ]4+ in the presence of these amino acids gave the rate constants k f = 2.1 × 101 and 2.8 dm3 mol-1 s-1, for cysteine and histidine, respectively. One molecule of NO or nitrite was found to coordinate to the [ Co II tmtppa ]4+ species. The equilibrium and rate constants for the coordination of the nitric oxide were K = 2.3 × 104 dm 3 mol -1 and k f = 7.5 dm 3 mol -1 s -1, respectively. The coordination of nitrite to [ Co II tmtppa ]4+ occurred with an equilibrium constant of K = 2.0 × 102 dm 3 mol -1 and a rate constant of k f = 4.0 × 10-3 dm 3 mol -1 s -1. There was no evidence for the coordination of two molecules of nitrite to the [ Co II tmtppa ]4+ species.

scholarly journals Unreliability of rate constants derived from a linear transformation of kinetic data, with special reference to cholesterol equilibration between phospholipid vesicles

1992 ◽  
Vol 283 (2) ◽  
pp. 537-539 ◽  
Author(s):  
N Gains
Keyword(s):  
Linear Regression ◽  
Special Reference ◽  
Correlation Coefficient ◽  
Rate Constant ◽  
Rate Constants ◽  
Kinetic Data ◽  
Time Dependent ◽  
Phospholipid Vesicles ◽  
Zero Time ◽  
Made In

In the time-dependent transfer of a lipid from a donor to an acceptor vesicle population a(t) is the amount transferred to the acceptor vesicles at time t, a infinity is the equilibrium transfer value and a0 is the value at zero time. In order to plot kinetic data (a(t) as ln[(a infinity - a(t))/(a infinity - a(t))] against time and to fit these with a linear regression, it is necessary to know the equilibrium value, a infinity, or to choose one. Here it is shown that even if a very larger error is made in the choice of a infinity, the resulting plot can still be acceptably linear and the correlation coefficient of the regression acceptably high. When a infinity is overestimated the rate constant derived from the slope of such a plot is underestimated. In extreme cases a 10-fold error can occur.

Determination of rate constants of redox reactions of second order from current-less potential-time curves by a simplified graphical-numerical method

1983 ◽  
Vol 48 (5) ◽  
pp. 1358-1367 ◽  
Author(s):  
Antonín Tockstein ◽  
František Skopal
Keyword(s):  
Numerical Method ◽  
Explicit Form ◽  
Rate Constant ◽  
Optimization Algorithm ◽  
Rate Constants ◽  
Redox Reactions ◽  
Second Order ◽  
Wide Region ◽  
Recurrent Formula

A method for constructing curves is proposed that are linear in a wide region and from whose slopes it is possible to determine the rate constant, if a parameter, θ, is calculated numerically from a rapidly converging recurrent formula or from its explicit form. The values of rate constants and parameter θ thus simply found are compared with those found by an optimization algorithm on a computer; the deviations do not exceed ±10%.

The Effect of p-Toluidine on the Two-Step Electroreduction of Zn(II) in Water-Methanol and Water-Dimethylformamide

1999 ◽  
Vol 64 (4) ◽  
pp. 585-594 ◽  
Author(s):  
Barbara Marczewska
Keyword(s):  
Electron Transfer ◽  
Binary Mixtures ◽  
Rate Constant ◽  
Rate Constants ◽  
Electrode Surface ◽  
Mercury Electrode ◽  
Forward Rate ◽  
Solvent Molecules ◽  
Activated Complex

The acceleration effect of p-toluidine on the electroreduction of Zn(II) on the mercury electrode surface in binary mixtures water-methanol and water-dimethylformamide is discussed. The obtained apparent and true forward rate constants of Zn(II) reduction indicate that the rate constant of the first electron transfer increases in the presence of p-toluidine. The acceleration effect may probably be accounted for by the concept of the formation on the mercury electrode an activated complex, presumably composed of p-toluidine and solvent molecules.

Radiolysis studies on the corrosion inhibitors 1 -hexyn-3-ol, cinnamonitrile, and 1,3-diethyl-2-thiourea

1995 ◽  
Vol 73 (12) ◽  
pp. 2137-2142 ◽  
Author(s):  
A.J. Elliot ◽  
M.P. Chenier ◽  
D.C. Ouellette
Keyword(s):  
Hydrogen Atom ◽  
Hydroxyl Radical ◽  
Temperature Dependence ◽  
Rate Constant ◽  
Rate Constants ◽  
Corrosion Inhibitors ◽  
Hydrated Electron

In this publication we report: (i) the rate constants for reaction of the hydrated electron with 1-hexyn-3-ol ((8.6 ± 0.3) × 108 dm3 mol−1 s−1 at 18 °C), cinnamonitrile ((2.3 ± 0.2) × 1010 dm3 mol−1 s−1 at 20 °C), and 1,3-diethyl-2-thiourea ((3.5 ± 0.3) × 108 dm3 mol−1 s−1 at 22 °C). For cinnamonitrile and diethylthiourea, the temperature dependence up to 200 °C and 150 °C, respectively, is also reported; (ii) the rate constants for the reaction of the hydroxyl radical with 1-hexyn-3-ol ((5.5 ± 0.5) × 109 dm3 mol−1 s−1 at 20 °C), cinnamonitrile ((9.2 ± 0.3) × 109 dm3 mol−1 s−1 at 21 °C), and diethylthiourea ((8.0 ± 0.8) × 108 dm3 mol−1 s−1 at 22 °C). For cinnamonitrile, the temperature dependence up to 200 °C is also reported; (iii) the rate constant for the hydrogen atom reacting with 1-hexyn-3-ol ((4.3 ± 0.4) × 109 dm3 mol−1 s−1 at 20 °C). Keywords: radiolysis, corrosion inhibitors, rate constants.

An ICR mass spectrometry study of ion/molecule reactions between ethyl chloride and alkylamines

1991 ◽  
Vol 69 (2) ◽  
pp. 363-367
Author(s):  
Guoying Xu ◽  
Jan A. Herman
Keyword(s):  
Mass Spectrometry ◽  
Key Words ◽  
Rate Constant ◽  
Rate Constants ◽  
Ethyl Chloride ◽  
Ion Molecule Reactions ◽  
Mass Spectrometry Study ◽  
Ethyl Cation

Ion/molecule reactions in mixtures of ethyl chloride with C1–C4 alkylamines were studied by ICR mass spectrometry. Ethyl cation transfer to C1–C4 alkylamines proceeds mainly through diethylchloronium ions with rate constants ~3 × 10−10cm3 s−1. In the case of s-butylamine the corresponding rate constant is 0.5 × 10−10 cm3 s−1. Key words: ICR mass spectrometry, ion/molecule reactions, ethylchloride, methylamine, ethylamine, propylamines, butylamines

Mechanistic studies of aromatic ketone-sensitized photoreduction of bis(acetylacetonato)copper(II)

1983 ◽  
Vol 61 (5) ◽  
pp. 801-808 ◽  
Author(s):  
Yuan L. Chow ◽  
Gonzalo E. Buono-Core ◽  
Bronislaw Marciniak ◽  
Carol Beddard
Keyword(s):  
Rate Constant ◽  
Rate Constants ◽  
Flash Photolysis ◽  
Decay Rates ◽  
Polynuclear Aromatic Hydrocarbons ◽  
Aromatic Ketone ◽  
Quantum Yields ◽  
Triplet States ◽  
Quenching Rate ◽  
Triplet Energy

Bis(acetylacetonato)copper(II), Cu(acac)2, quenches triplet excited states of ketones and polynuclear aromatic hydrocarbons efficiently, but only aromatic ketones with high triplet energy successfully sensitize photoreduction of Cu(acac)2 in alcohols under nitrogen to give derivatives of aeetylacetonatocopper(I), Cu(acac). For the triplet state benzophenone-sensitized photoreduction of Cu(acac)2, the quantum yields of photoreduction (ΦC) and those of benzophenone disappearance (ΦB) were determined in methanol with various concentrations of Cu(acac)2. The values of the quenching rate constant, kq, determined from these two types of monitors on the basis of the proposed mechanism were in good agreement (6.89 ~ 7.35 × 109 M−1 s−1). This value was higher, by a factor of about two, than that obtained from the monitor of the benzophenone triplet decay rates generated by flash photolysis in the presence of Cu(acac)2. The quenching rate constants of various aromatic ketone and hydrocarbon triplet states by Cu(acac)2 were determined by flash photolysis to be in the order of the diffusion rate constant and the quantum yields of these photoreductions were found to be far from unity. Paramagnetic quenching, with contributions of electron exchange and charge transfer, was proposed as a possible quenching mechanism. For a series of aromatic ketone sensitizers with higher triplet energy, this mechanism was used to rationalize the observed high quenching rate constants in contrast to the low quantum yields of photoreduction.

Effect of Medium on Reactivity for Alkaline Hydrolysis of p-Nitrophenyl Acetate and S-p-Nitrophenyl Thioacetate in DMSO-H2O Mixtures of Varying Compositions: Ground State and Transition State Contributions

2021 ◽  
Author(s):  
Ik-Hwan Um ◽  
Seungjae Kim
Keyword(s):  
Transition State ◽  
Alkaline Hydrolysis ◽  
Ground State ◽  
Rate Constants ◽  
Kinetic Data ◽  
Reaction Medium ◽  
Stepwise Mechanism ◽  
Rate Determining Step ◽  
Leaving Group ◽  
Hydrolysis Of

Second-order rate constants (kN) for reactions of p-nitrophenyl acetate (1) and S-p-nitrophenyl thioacetate (2) with OH‒ have been measured spectrophotometrically in DMSO-H2O mixtures of varying compositions at 25.0 ± 0.1 oC. The kN value increases from 11.6 to 32,800 M‒1s‒1 for the reactions of 1 and from 5.90 to 190,000 M‒1s‒1 for those of 2 as the reaction medium changes from H2O to 80 mol % DMSO, indicating that the effect of medium on reactivity is more remarkable for the reactions of 2 than for those of 1. Although 2 possesses a better leaving group than 1, the former is less reactive than the latter by a factor of 2 in H2O. This implies that expulsion of the leaving group is not advanced in the rate-determining transition state (TS), i.e., the reactions of 1 and 2 with OH‒ proceed through a stepwise mechanism, in which expulsion of the leaving group from the addition intermediate occurs after the rate-determining step (RDS). Addition of DMSO to H2O would destabilize OH‒ through electronic repulsion between the anion and the negative-dipole end in DMSO. However, destabilization of OH‒ in the ground state (GS) is not solely responsible for the remarkably enhanced reactivity upon addition of DMSO to the medium. The effect of medium on reactivity has been dissected into the GS and TS contributions through combination of the kinetic data with the transfer enthalpies (ΔΔHtr) from H2O to DMSO-H2O mixtures for OH‒ ion.

scholarly journals Impact of uncertainties in inorganic chemical rate constants on tropospheric composition and ozone radiative forcing

2017 ◽  
Author(s):  
Ben Newsome ◽  
Mat Evans
Keyword(s):  
Rate Constant ◽  
Atmospheric Chemistry ◽  
Rate Constants ◽  
Tropospheric Ozone ◽  
Radiative Forcing ◽  
Transport Model ◽  
Surface Ozone ◽  
Photolysis Rates ◽  
The Impact ◽  
Chemical Rate

Abstract. Chemical rate constants determine the composition of the atmosphere and how this composition has changed over time. They are central to our understanding of climate change and air quality degradation. Atmospheric chemistry models, whether online or offline, box, regional or global use these rate constants. Expert panels synthesise laboratory measurements, making recommendations for the rate constants that should be used. This results in very similar or identical rate constants being used by all models. The inherent uncertainties in these recommendations are, in general, therefore ignored. We explore the impact of these uncertainties on the composition of the troposphere using the GEOS-Chem chemistry transport model. Based on the JPL and IUPAC evaluations we assess 50 mainly inorganic rate constants and 10 photolysis rates, through simulations where we increase the rate of the reactions to the 1σ upper value recommended by the expert panels. We assess the impact on 4 standard metrics: annual mean tropospheric ozone burden, surface ozone and tropospheric OH concentrations, and tropospheric methane lifetime. Uncertainty in the rate constants for NO2 + OH    M →  HNO3, OH + CH4 → CH3O2 + H2O and O3 + NO → NO2 + O2 are the three largest source of uncertainty in these metrics. We investigate two methods of assessing these uncertainties, addition in quadrature and a Monte Carlo approach, and conclude they give similar outcomes. Combining the uncertainties across the 60 reactions, gives overall uncertainties on the annual mean tropospheric ozone burden, surface ozone and tropospheric OH concentrations, and tropospheric methane lifetime of 11, 12, 17 and 17 % respectively. These are larger than the spread between models in recent model inter-comparisons. Remote regions such as the tropics, poles, and upper troposphere are most uncertain. This chemical uncertainty is sufficiently large to suggest that rate constant uncertainty should be considered when model results disagree with measurement. Calculations for the pre-industrial allow a tropospheric ozone radiative forcing to be calculated of 0.412 ± 0.062 Wm−2. This uncertainty (15 %) is comparable to the inter-model spread in ozone radiative forcing found in previous model-model inter-comparison studies where the rate constants used in the models are all identical or very similar. Thus the uncertainty of tropospheric ozone radiative forcing should expanded to include this additional source of uncertainty. These rate constant uncertainties are significant and suggest that refinement of supposedly well known chemical rate constants should be considered alongside other improvements to enhance our understanding of atmospheric processes.

scholarly journals Reactivity of cyclohex-1-enylcarboxylic and 2-methylcyclohex-1-enylcarboxylic acids with diazodiphenylmethane in aprotic solvents

2000 ◽  
Vol 65 (12) ◽  
pp. 839-846
Author(s):  
Jasmina Nikolic ◽  
Gordana Uscumlic ◽  
Vera Krstic
Keyword(s):  
Hydrogen Bond ◽  
Rate Constants ◽  
Kinetic Data ◽  
Linear Regression Analysis ◽  
Spectroscopic Method ◽  
Reaction Rates ◽  
Aprotic Solvents ◽  
Experimental Conditions ◽  
Hydrogen Bond Acceptor ◽  
Protic Solvents

Rate constants for the reaction of diazodiphenylmethane with cyclohex-1-enylcarboxylic acid and 2-methylcyclohex-1-enylcarboxylic acid were determined in nine aprotic solvents, as well as in seven protic solvents, at 30?C using the appropriate UV-spectroscopic method. In protic solvents the unsubsituted acid displayed higher reaction rates than the methyl-substituted one. The results in aprotic solvents showed quite the opposite, and the reaction rates were considerably lower. In order to explain the obtained results through solvent effects, reaction rate constants (k) of the examined acids were correlated using the total solvatochromic equation of the form: log k=logk0+s?*+a?+b?, where ?* is the measure of the solvent polarity, a represents the scale of the solvent hydrogen bond donor acidities (HBD) and b represents the scale of the solvent hydrogen bond acceptor basicities (HBA). The correlation of the kinetic data were carried out by means of multiple linear regression analysis and the opposite effects of aprotic solvents, as well as the difference in the influence of protic and aprotic solvents on the reaction of the two examined acids with DDM were discussed. The results presented in this paper for cyclohex-1-enylcarboxylic and 2-methylcyclohex-1-enylcarboxylic acids were compared with the kinetic data for benzoic acid obtained in the same chemical reaction, under the same experimental conditions.

Sign in / Sign up

Export Citation Format

Share Document