SOME ABNORMAL HYDROGEN ELECTRODE REACTIONS

1959 ◽  
Vol 37 (1) ◽  
pp. 213-221 ◽  
Author(s):  
D. J. G. Ives

A brief account is given of experiments in which gold electrodes, as a result of thermal deactivation in hydrogen, change from a state in which their behavior in relation to the hydrogen evolution reaction is normal to a state characterized by high positive rest potentials, greatly enhanced overpotentials which increase progressively during current flow, and which decay slowly on open circuit, generating potential–time curves which resemble desorption isotherms.Conclusions based on these phenomena are supported by the results of experiments with poisoned platinum electrodes, which not only behave similarly but are also shown to retain reducing power for a limited time on open circuit.It is suggested that electrodeposited hydrogen atoms may sometimes evaporate from an electrode into solution by a mechanism involving the participation of molecule-ions. A recent theoretical treatment of hydrogen overpotential can be extended to allow for the occurrence of such a final reaction step.

1973 ◽  
Vol 26 (12) ◽  
pp. 2587 ◽  
Author(s):  
T Biegler

The adsorptive properties of platinized electrodes, as indicated by cyclic voltammetry, depended on the potential of platinum electrodeposition. Electrodes deposited above 0.05 V v. reversible hydrogen electrode were similar to smooth platinum, while those deposited at negative potentials showed anomalous behaviour, particularly with regard to hydrogen sorption. Measurements with such electrodes over a range of sweep rates showed slow sorption of about two hydrogen atoms in excess of the usual fast adsorption of one hydrogen atom per surface platinum atom. Freshly electrodeposited platinum had a specific activity for methanol oxidation of one-quarter to one-half that of smooth platinum. The lower activity was attributed to the effects of disordered surface structure and/or small particle size. Anodic-cathodic cycling produced surface recrystallization and activities close to that for smooth platinum.


2000 ◽  
Vol 65 (1) ◽  
pp. 1-8 ◽  
Author(s):  
Tomáš Loučka

The aim of this research was to study the oxidation and reduction of the adsorbed thiosulfate on the platinum electrode in a slightly alkaline medium. The adsorption was performed at the open circuit conditions. The reduction of the adsorbed layer in the hydrogen region is slower in a slightly alkaline medium than in acid. The mechanism of reduction and oxidation of adsorbed molecules is probably the same. The nonstationary currents measured in presence of thiosulfates showed that the change in the oxidation number does not take place during the adsorption in the double layer region. In the hydrogen region, thiosulfate replaces the adsorbed hydrogen while beeing reduced. Nonstationary currents at higher concentrations of thiosulfate indicate the presence of more layers on the electrode. Upon reaching higher concentrations of thiosulfate the oxidation reaction takes place between thiosulfate in solution and adsorbed product of its reduction. The open circuit potential of the platinum electrode measured in a thiosulfate solution was 0.780 and 0.783 V against the hydrogen electrode in the same solution.


The rates of dehydrogenation in competition experiments using mixtures of two naphthenes, or a naphthene and a cyclic mono-olefine or two cyclic mono-olefines, have been examined theoretically and experimentally for the stationary state conditions. Provided the two reactants can occupy the same sites on the catalyst surface, then the ratio of the rates should be directly proportional to the ratio of the partial pressures at any instant. Theory suggests that a constant which can be derived from these competition experiments should be independent of the overall pressures, or of the initial ratio of concentrations or of the overall extent of dehydrogenation. Further, the ratio of the rates in competition should bear no simple relationship to the ratio of the individual rates alone, but should be related to the slopes of the 1/rate against 1/pressure plot for the two components considered separately. Moreover, the constant should be a ratio of two functions each of which is characteristic of one of the naphthenes. The theoretical conclusions have been confirmed experimentally which proves either that the groups of active sites on the catalyst surface are widely separated or that any set of sites is available for the reaction of any molecular species, and no interference takes place between naphthene molecules adsorbed on adjacent sites. Proof that a naphthene and cyclohexene are dehydrogenated on the same sites is supplied by the observation that a constant is obtained when different mixtures of cyclohexene and trans -1:4-dimethyl cyclohexane are allowed to compete for the surface. The ratios for methyl, ethyl, the three dimethyl and the three trimethyl cyclohexanes in competition with cyclohexane have been accurately determined at temperatures of 400 and 450° C. From the constants so derived the activation energy differences for the removal of the first pair of hydrogen atoms has been obtained. These values are discussed in terms of the possible transition complexes, and it is shown that the reaction proceeds by the loss of a pair of hydrogen atoms simultaneously and not by a half-hydrogenated state mechanism. Using these activation energies and the experimentally found overall activation energy of 36 kcal./g. mol., the resonance energy per resonating structure was determined as 1-73 kcal. This is in good agreement with the energies of C-H bonds in alkyl radicals (2-2 kcal./g.mol./ resonating structure). The theoretical treatment suggests that the weakest C-H link in methyl cyclohexane should be in the three position to the methyl group. A study of the activation energies involved shows that the methyl cyclohexene produced from methyl cyclohexane is not 1-methyl-1-cyclohexene, thus confirming the theoretical deduction.


1— In certain metals such as Cu, hydrogen appears to be dissolved in the metal in the form of free protons, which do not affect the normal metal lattice, even when present at very considerable concentrations. In other metals such as Ti, definite metal hydrides are formed which have a different lattice structure from the pure metal. The metal Pd is intermediate since the hydrogen affects the lattice constant. It is the properties of the former group of metals which are first to be discussed here, since the fact that the normal metal lattice is (practically) unaffected seems to justify a very simple theoretical treatment of the solubility, and it is of some interest to examine how the theory compares with the facts. We shall find that we can bring the facts and the theory into satisfactory order together. The various types of solubility curve are shown in fig. 1. 2— From evidence such as the well-known p 1/2 law for the rate of diffusion of hydrogen through metals we may certainly assume that the hydrogen in the metal is atomic. For the present we shall neglect the difference between atoms of hydrogen and protons plus electrons, and merely assume that the atoms are present as such in the metal, without specific interaction with particular metallic atoms; the metal merely provides a region in which hydrogen atoms can exist and move in a definite field of potential energy. Specific contributions by the electrons of the hydrogen atoms will be considered later, when the hydrogen atoms in the metal will be considered as protons plus electrons.


1934 ◽  
Vol 11 (4) ◽  
pp. 539-546
Author(s):  
J. W. Shipley

The a.-c. electrolysis of sodium carbonate solutions at voltages as high as 110, even when arcing occurs on the electrodes, does not cause the evolution of carbon dioxide. In the a.-c. electrolysis of aqueous bicarbonate solutions with platinum electrodes, hydrogen, oxygen and carbon dioxide are evolved freely until all the bicarbonate has been transformed to carbonate, after which the evolution of carbon dioxide ceases and only hydrogen and oxygen are given off. In a.-c. electrolysis of sodium bicarbonate solutions and solutions of the sodium salts of aliphatic acids, a deposit of finely divided platinum is formed on the electrodes. This deposit inhibits the evolution of carbon dioxide, hydrogen and oxygen, but does not affect the current flow. The decomposition potential of bicarbonate solutions in respect to the evolution of carbon dioxide on smooth platinum and with d.c. was found to be 2.2 volts, and of carbonate solutions, 3.5 volts. The anodic discharge potential of HCO3− is − 1.45 to − 1.50 volts, and of CO3−−, − 1.90 to − 1.95 volts. The evolution of carbon dioxide does not appear to cause any polarizing effect on the anode.


2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Sunil Pandey ◽  
Ashmi Mewada ◽  
Mukeshchand Thakur ◽  
Sachin Shinde ◽  
Ritu Shah ◽  
...  

Present work reports exceptionally high reducing capacity of Trapa bispinosa to synthesize monodispersed silver nanoparticles (SNPs) within 120 seconds at 30°C which is the shortest tenure reported for SNP synthesis using plants. Moreover, we also instigated impact of different pH values on fabrication of SNPs using visible spectroscopy with respect to time. Percentage conversion of Ag+ ions into Ag° was calculated using ICP-AES analysis and was found to be 97% at pH = 7. To investigate the reduction of Ag+ ions to SNPs, cyclic voltammetry (CV) and open circuit potential (OCP) using 0.1 M KNO3 were performed. There was prompt reduction in cathodic and anodic currents after addition of the peel extract which indicates the reducing power of T. bispinosa peel. Stability of the SNPs was studied using flocculation parameter (FP) which was found to be least at all the pH values. FP was found to be indirectly proportional to stability of the nanoparticles.


Sign in / Sign up

Export Citation Format

Share Document