HYDROGENOLYSIS OF CARBOHYDRATES: II. REDUCTION OF METHYL α-D-GLUCOPYRANOSIDE

1957 ◽  
Vol 35 (4) ◽  
pp. 315-321 ◽  
Author(s):  
E. Von Rudloff ◽  
D. E. Stuetz ◽  
H. F. Bauer
Keyword(s):  
Elevated Temperatures ◽  
Copper Chromite ◽  
Complex Mixture ◽  
Anhydrous Dioxane

The hydrogenolysis of methyl α-D-glucopyranoside at elevated temperatures and pressures with copper chromite as catalyst and anhydrous dioxane as solvent was studied. The reaction produced a complex mixture of alcohols, the major components being 2-hydroxymethyl-4,5-dihydroxytetrahydropyran, methanol, isomeric hexanediols, 1,2-propanediol, and ethanediol.

Studies on the products resulting from the conversion of aspen poplar to an oil

1981 ◽  
Vol 59 (14) ◽  
pp. 2191-2198 ◽  
Author(s):  
Richard L. Eager ◽  
Joseph F. Mathews ◽  
James M. Pepper ◽  
Hussein Zohdi
Keyword(s):  
Carbon Dioxide ◽  
Elevated Temperatures ◽  
Exothermic Reaction ◽  
Complex Mixture ◽  
Water Soluble ◽  
Low Molecular Weight ◽  
Oxygenated Water ◽  
Model Substances ◽  
Chemical Products ◽  
Increasing Temperature

Some observations are made on the nature of the reactions involved in the conversion of aspen poplar into a variety of chemical products as a result of its interaction with carbon monoxide and water in the presence of sodium carbonate at elevated temperatures and pressures. The original carbon content of the wood is distributed between an oil phase, a complex mixture of highly oxygenated water-soluble products many of which have been identified as low molecular weight aliphatic alcohols, ketones, and acids, and a gaseous phase consisting of mainly hydrogen and carbon dioxide. Using model substances (cellulose, cellobiose, D-glucose, D-fructose, D-xylose, D-sorbitol, glycerol, and an isolated lignin) information was obtained on the origin of the oil and of the water-soluble products. Studies at temperatures from 160° to 360 °C revealed a marked exothermic reaction occurring in the 200–240 °C range for wood and cellulose and which was reflected in the nature of the resulting product. With increasing temperature there is an increase in the yields of the water-soluble derivatives and also a change in their relative abundance.

Characterization of Rare-Earth Fluoride Anti-Stokes Phosphors by Scanning arid Transmission Electron Microscopy

1971 ◽  
Vol 29 ◽  
pp. 142-143
Author(s):  
N. M. P. Low ◽  
L. E. Brosselard
Keyword(s):  
Electron Microscopy ◽  
Rare Earth ◽  
Elevated Temperatures ◽  
Stoichiometric Composition ◽  
Rare Earth Ions ◽  
Crystalline Solid ◽  
Precipitation Process ◽  
Rare Earth Fluoride ◽  
Earth Fluoride ◽  
Rare Earth Fluorides

There has been considerable interest over the past several years in materials capable of converting infrared radiation to visible light by means of sequential excitation in two or more steps. Several rare-earth trifluorides (LaF3, YF3, GdF3, and LuF3) containing a small amount of other trivalent rare-earth ions (Yb3+ and Er3+, or Ho3+, or Tm3+) have been found to exhibit such phenomenon. The methods of preparation of these rare-earth fluorides in the crystalline solid form generally involve a co-precipitation process and a subsequent solid state reaction at elevated temperatures. This investigation was undertaken to examine the morphological features of both the precipitated and the thermally treated fluoride powders by both transmission and scanning electron microscopy.Rare-earth oxides of stoichiometric composition were dissolved in nitric acid and the mixed rare-earth fluoride was then coprecipitated out as fine granules by the addition of excess hydrofluoric acid. The precipitated rare-earth fluorides were washed with water, separated from the aqueous solution, and oven-dried.

Observations oh Nucleation and Growth of Voids in Nickel

1970 ◽  
Vol 28 ◽  
pp. 414-415
Author(s):  
J. L. Brimhall ◽  
H. E. Kissinger ◽  
B. Mastel
Keyword(s):  
High Purity ◽  
Growth Stage ◽  
Elevated Temperatures ◽  
Early Growth ◽  
Nucleation And Growth ◽  
Pure Nickel ◽  
Different Temperatures ◽  
Total Fluence ◽  
Neutron Exposure ◽  
Growth Of Voids

Some information on the size and density of voids that develop in several high purity metals and alloys during irradiation with neutrons at elevated temperatures has been reported as a function of irradiation parameters. An area of particular interest is the nucleation and early growth stage of voids. It is the purpose of this paper to describe the microstructure in high purity nickel after irradiation to a very low but constant neutron exposure at three different temperatures.Annealed specimens of 99-997% pure nickel in the form of foils 75μ thick were irradiated in a capsule to a total fluence of 2.2 × 1019 n/cm2 (E > 1.0 MeV). The capsule consisted of three temperature zones maintained by heaters and monitored by thermocouples at 350, 400, and 450°C, respectively. The temperature was automatically dropped to 60°C while the reactor was down.

Voids in Irradiated Tungsten and Molybdenum

1969 ◽  
Vol 27 ◽  
pp. 190-191
Author(s):  
Robert C. Rau ◽  
Robert L. Ladd
Keyword(s):  
Melting Point ◽  
Fast Neutron ◽  
Neutron Irradiation ◽  
Elevated Temperatures ◽  
Irradiation Temperature ◽  
The Body ◽  
Face Centered Cubic ◽  
Body Centered Cubic ◽  
Cubic Metals ◽  
Face Centered

Recent studies have shown the presence of voids in several face-centered cubic metals after neutron irradiation at elevated temperatures. These voids were found when the irradiation temperature was above 0.3 Tm where Tm is the absolute melting point, and were ascribed to the agglomeration of lattice vacancies resulting from fast neutron generated displacement cascades. The present paper reports the existence of similar voids in the body-centered cubic metals tungsten and molybdenum.

Mechanical Properties and Dislocation Structure of Single Crystal Cdte Deformed in Compression at 300°C

1976 ◽  
Vol 34 ◽  
pp. 592-593
Author(s):  
Ernest L. Hall ◽  
J. B. Vander Sande
Keyword(s):  
Mechanical Properties ◽  
Single Crystal ◽  
Dislocation Structure ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Strain Curve ◽  
Optical Devices ◽  
Semiconductor Compound ◽  
Wide Range ◽  
Sample Orientation

The present paper describes research on the mechanical properties and related dislocation structure of CdTe, a II-VI semiconductor compound with a wide range of uses in electrical and optical devices. At room temperature CdTe exhibits little plasticity and at the same time relatively low strength and hardness. The mechanical behavior of CdTe was examined at elevated temperatures with the goal of understanding plastic flow in this material and eventually improving the room temperature properties. Several samples of single crystal CdTe of identical size and crystallographic orientation were deformed in compression at 300°C to various levels of total strain. A resolved shear stress vs. compressive glide strain curve (Figure la) was derived from the results of the tests and the knowledge of the sample orientation.

Electron microscopy of crystalline structure in thermotropic random copolymers

1991 ◽  
Vol 49 ◽  
pp. 1054-1055
Author(s):  
Afzana Anwer ◽  
S. Eilidh Bedford ◽  
Richard J. Spontak ◽  
Alan H. Windle
Keyword(s):  
Electron Microscopy ◽  
Crystalline Structure ◽  
Liquid Crystalline ◽  
Elevated Temperatures ◽  
Random Copolymers ◽  
Molecular Characteristics ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Identical Monomer ◽  
Periodic Layer

Random copolyesters composed of wholly aromatic monomers such as p-oxybenzoate (B) and 2,6-oxynaphthoate (N) are known to exhibit liquid crystalline characteristics at elevated temperatures and over a broad composition range. Previous studies employing techniques such as X-ray diffractometry (XRD) and differential scanning calorimetry (DSC) have conclusively proven that these thermotropic copolymers can possess a significant crystalline fraction, depending on molecular characteristics and processing history, despite the fact that the copolymer chains possess random intramolecular sequencing. Consequently, the nature of the crystalline structure that develops when these materials are processed in their mesophases and subsequently annealed has recently received considerable attention. A model that has been consistent with all experimental observations involves the Non-Periodic Layer (NPL) crystallite, which occurs when identical monomer sequences enter into register between adjacent chains. The objective of this work is to employ electron microscopy to identify and characterize these crystallites.

Generation of 4H and 6H Structures During the Hexagonal-Rhombohedral Transformation in Dy2Co17

1975 ◽  
Vol 33 ◽  
pp. 38-39
Author(s):  
C. W. Allen ◽  
D. L. Kuruzar
Keyword(s):  
Elevated Temperatures ◽  
Layer Structure ◽  
Transition Element ◽  
Temperature Structure ◽  
Allotropic Transformation ◽  
Layer Plane ◽  
Planar Defects ◽  
Topologically Close Packed ◽  
Transformation Mechanisms ◽  
Shear Transformation

The rare earth/transition element intermetallics R2T17 are essentially topologically close packed phases for which layer structure models have already been presented. Many of these compounds are known to undergo allotropic transformation of the type at elevated temperatures. It is not unexpected that shear transformation mechanisms are involved in view of the layering character of the structures. The transformations are evidently quite sluggish, illustrated in furnace cooled Dy2Co17 by the fact that only rarely has the low temperature rhombohedral form been seen. The more usual structures observed so far in furnace cooled alloys include 4H and 6H in Dy2Co17 (Figs. 1 and 2) . In any event it is quite clear that the general microstructure is very complicated as a consequence of the allotropy, illustrated in Fig. 3. Numerous planar defects in the layer plane orientation are evident as are non-layer plane defects inherited from a high temperature structure.

Spherulite Structures in a Melt Spun Fe-Ni Austenitic Steel

1985 ◽  
Vol 43 ◽  
pp. 52-53
Author(s):  
G. M. Michal ◽  
T. K. Glasgow ◽  
T. J. Moore
Keyword(s):  
Austenitic Steel ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Large Range ◽  
Amorphous Structure ◽  
Nucleation And Growth ◽  
Ni Alloys ◽  
Melt Spun ◽  
Crystal Fibers ◽  
Rapidly Solidified

Large additions of B to Fe-Ni alloys can lead to the formation of an amorphous structure, if the alloy is rapidly cooled from the liquid state to room temperature. Isothermal aging of such structures at elevated temperatures causes crystallization to occur. Commonly such crystallization pro ceeds by the nucleation and growth of spherulites which are spherical crystalline bodies of radiating crystal fibers. Spherulite features were found in the present study in a rapidly solidified alloy that was fully crysstalline as-cast. This alloy was part of a program to develop an austenitic steel for elevated temperature applications by strengthening it with TiB2. The alloy contained a relatively large percentage of B, not to induce an amorphous structure, but only as a consequence of trying to obtain a large volume fracture of TiB2 in the completely processed alloy. The observation of spherulitic features in this alloy is described herein. Utilization of the large range of useful magnifications obtainable in a modern TEM, when a suitably thinned foil is available, was a key element in this analysis.

TEM visualization of surface replicated acid and base catalyzed sol-gel glasses

1986 ◽  
Vol 44 ◽  
pp. 448-449
Author(s):  
George C. Ruben ◽  
Merrill W. Shafer
Keyword(s):  
Elevated Temperatures ◽  
Sol Gel ◽  
Basic Medium ◽  
Glass Transition Point ◽  
Structural Space ◽  
Acid And Base ◽  
Organometallic Precursors ◽  
New Processing ◽  
Gel Glasses ◽  
Physical Phenomena

Traditionally ceramics have been shaped from powders and densified at temperatures close to their liquid point. New processing methods using various types of sols, gels, and organometallic precursors at low temperature which enable densificatlon at elevated temperatures well below their liquidus, hold the promise of producing ceramics and glasses of controlled and reproducible properties that are highly reliable for electronic, structural, space or medical applications. Ultrastructure processing of silicon alkoxides in acid medium and mixtures of Ludox HS-40 (120Å spheres from DuPont) and Kasil (38% K2O &62% SiO2) in basic medium have been aimed at producing materials with a range of well defined pore sizes (∼20-400Å) to study physical phenomena and materials behavior in well characterized confined geometries. We have studied Pt/C surface replicas of some of these porous sol-gels prepared at temperatures below their glass transition point.

High-Temperature Instability of A Cr2Nb-Nb(Cr) Microlaminate Composite

1996 ◽  
Vol 54 ◽  
pp. 374-375
Author(s):  
M. Larsen ◽  
R.G. Rowe ◽  
D.W. Skelly
Keyword(s):  
Heat Treatment ◽  
Solid Solution ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Aircraft Engine ◽  
Lattice Parameter ◽  
Microstructural Stability ◽  
Elevated Temperature Strength ◽  
Cross Sectional ◽  
Bcc Structure

Microlaminate composites consisting of alternating layers of a high temperature intermetallic compound for elevated temperature strength and a ductile refractory metal for toughening may have uses in aircraft engine turbines. Microstructural stability at elevated temperatures is a crucial requirement for these composites. A microlaminate composite consisting of alternating layers of Cr2Nb and Nb(Cr) was produced by vapor phase deposition. The stability of the layers at elevated temperatures was investigated by cross-sectional TEM.The as-deposited composite consists of layers of a Nb(Cr) solid solution with a composition in atomic percent of 91% Nb and 9% Cr. It has a bcc structure with highly elongated grains. Alternating with this Nb(Cr) layer is the Cr2Nb layer. However, this layer has deposited as a fine grain Cr(Nb) solid solution with a metastable bcc structure and a lattice parameter about half way between that of pure Nb and pure Cr. The atomic composition of this layer is 60% Cr and 40% Nb. The interface between the layers in the as-deposited condition appears very flat (figure 1). After a two hour, 1200 °C heat treatment, the metastable Cr(Nb) layer transforms to the Cr2Nb phase with the C15 cubic structure. Grain coarsening occurs in the Nb(Cr) layer and the interface between the layers roughen. The roughening of the interface is a prelude to an instability of the interface at higher heat treatment temperatures with perturbations of the Cr2Nb grains penetrating into the Nb(Cr) layer.

Sign in / Sign up

Export Citation Format

Share Document