Self-assembled coating for modification of the electro-osmotic flow in nonaqueous capillary electrophoresis using formamide

2007 ◽  
Vol 85 (7-8) ◽  
pp. 540-546 ◽  
Author(s):  
Abebaw G Diress ◽  
Charles A Lucy
Keyword(s):  
Capillary Electrophoresis ◽  
Nonaqueous Solvents ◽  
Physical Factors ◽  
Pharmaceutical Drugs ◽  
Factors Affecting ◽  
Osmotic Flow ◽  
Hydrophobic Compounds ◽  
Silica Capillaries ◽  
Self Assembled ◽  
Electro Osmotic Flow

The use of pure nonaqueous solvents in capillary electrophoresis (CE) can alter the separation selectivity and enhance the solubility of hydrophobic compounds and enables the use of higher voltages. However, control of the electro-osmotic flow (EOF) is essential. In this work, we report the use of self-assembled coatings for EOF modification and elimination of analyte adsorptions onto silica capillaries in pure formamide. Bilayer capillary coatings derived from the double chain cationic surfactant dimethyldioctadecylammonium bromide (2C18DAB) reverses the EOF in buffers such as acetate, formate, and phosphate. Reversed EOF of >1.1 × 10–4 cm2/Vs enables the separation of the pharmaceutical drugs propranolol, metoprolol, chloroquine, and chloropheniramine in less than 5 min with efficiencies of 0.2–0.5 million plates/m (66 000 to 165 000 plates). Chemical and physical factors affecting the coating stability and their influence on separation speed and efficiency of the cationic drugs in formamide are also investigated.Key words: capillary electrophoresis, cationic surfactants, electro-osmotic flow, formamide, nonaqueous solvents.

scholarly journals Aphid–Plant–Phytovirus Pathosystems: Influencing Factors from Vector Behaviour to Virus Spread

Agriculture ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 502
Author(s):  
Junior Corneille Fingu-Mabola ◽  
Frédéric Francis
Keyword(s):  
Influencing Factors ◽  
Virus Transmission ◽  
Physical Factors ◽  
Factors Affecting ◽  
Vector Borne Diseases ◽  
Vector Behaviour ◽  
Crop Fields ◽  
Host Seeking ◽  
The Impact ◽  
Vector Efficiency

Aphids are responsible for the spread of more than half of the known phytovirus species. Virus transmission within the plant–aphid–phytovirus pathosystem depends on vector mobility which allows the aphid to reach its host plant and on vector efficiency in terms of ability to transmit phytoviruses. However, several other factors can influence the phytoviruses transmission process and have significant epidemiological consequences. In this review, we aimed to analyse the aphid behaviours and influencing factors affecting phytovirus spread. We discussed the impact of vector host-seeking and dispersal behaviours mostly involved in aphid-born phytovirus spread but also the effect of feeding behaviours and life history traits involved in plant–aphid–phytovirus relationships on vector performances. We also noted that these behaviours are influenced by factors inherent to the interactions between pathosystem components (mode of transmission of phytoviruses, vector efficiency, plant resistance, …) and several biological, biochemical, chemical or physical factors related to the environment of these pathosystem components, most of them being manipulated as means to control vector-borne diseases in the crop fields.

scholarly journals Towards bio-inspired artificial muscle: a mechanism based on electro-osmotic flow simulated using dissipative particle dynamics

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ramin Zakeri
Keyword(s):  
Zeta Potential ◽  
Electric Field ◽  
Dissipative Particle Dynamics ◽  
Artificial Muscle ◽  
Particle Dynamics ◽  
Polymer Membrane ◽  
Channel Width ◽  
Micro Channel ◽  
Osmotic Flow ◽  
Electro Osmotic Flow

AbstractOne of the unresolved issues in physiology is how exactly myosin moves in a filament as the smallest responsible organ for contracting of a natural muscle. In this research, inspired by nature, a model is presented consisting of DPD (dissipative particle dynamics) particles driven by electro-osmotic flow (EOF) in micro channel that a thin movable impermeable polymer membrane has been attached across channel width, thus momentum of fluid can directly transfer to myosin stem. At the first, by validation of electro-osmotic flow in micro channel in different conditions with accuracy of less than 10 percentage error compared to analytical results, the DPD results have been developed to displacement of an impermeable polymer membrane in EOF. It has been shown that by the presence of electric field of 250 V/m and Zeta potential − 25 mV and the dimensionless ratio of the channel width to the thickness of the electric double layer or kH = 8, about 15% displacement in 8 s time will be obtained compared to channel width. The influential parameters on the displacement of the polymer membrane from DPD particles in EOF such as changes in electric field, ion concentration, zeta potential effect, polymer material and the amount of membrane elasticity have been investigated which in each cases, the radius of gyration and auto correlation velocity of different polymer membrane cases have been compared together. This simulation method in addition of probably helping understand natural myosin displacement mechanism, can be extended to design the contraction of an artificial muscle tissue close to nature.

Modeling electro-osmotic flow and thermal transport of Caputo fractional Burgers fluid through a micro-channel

2021 ◽  
pp. 095440892110259
Author(s):  
Mohammed Abdulhameed ◽  
Garba Tahiru Adamu ◽  
Gulibur Yakubu Dauda
Keyword(s):  
Electric Field ◽  
Laplace Transform ◽  
Inverse Laplace Transform ◽  
Micro Channel ◽  
Osmotic Flow ◽  
Sine Transform ◽  
Fourier Sine ◽  
Fourier Sine Transform ◽  
Burgers Fluid ◽  
Electro Osmotic Flow

In this paper, we construct transient electro-osmotic flow of Burgers’ fluid with Caputo fractional derivative in a micro-channel, where the Poisson–Boltzmann equation described the potential electric field applied along the length of the microchannel. The analytical solution for the component of the velocity profile was obtained, first by applying the Laplace transform combined with the classical method of partial differential equations and, second by applying Laplace transform combined with the finite Fourier sine transform. The exact solution for the component of the temperature was obtained by applying Laplace transform and finite Fourier sine transform. Further, due to the complexity of the derived models of the governing equations for both velocity and temperature, the inverse Laplace transform was obtained with the aid of numerical inversion formula based on Stehfest's algorithms with the help of MATHCAD software. The graphical representations showing the effects of the time, retardation time, electro-kinetic width, and fractional parameters on the velocity of the fluid flow and the effects of time and fractional parameters on the temperature distribution in the micro-channel were presented and analyzed. The results show that the applied electric field, electro-osmotic force, electro-kinetic width, and relaxation time play a vital role on the velocity distribution in the micro-channel. The fractional parameters can be used to regulate both the velocity and temperature in the micro-channel. The study could be used in the design of various biomedical lab-on-chip devices, which could be useful for biomedical diagnosis and analysis.

Further Studies upon Chemical Factors Affecting the Breeding of Anopheles in Trinidad

1934 ◽  
Vol 25 (4) ◽  
pp. 491-494 ◽  
Author(s):  
P. A. Buxton
Keyword(s):  
Analytical Study ◽  
Chemical Constituents ◽  
Physical Factors ◽  
Factors Affecting ◽  
Early Stages ◽  
Freshwater Biology ◽  
Chemical Technique ◽  
Chemical Factors ◽  
Physical And Chemical

During the last decade, entomologists have made progress in understanding the environment in which certain insects live; in particular, we begin to understand the effect of certain physical and chemical factors, which make up a part of the environment. With this gain in knowledge, it is sometimes possible to forecast outbreaks of insects and of diseases conveyed by them, and one can sometimes say that a particular alteration of the environment will result in loss or gain. But so far as mosquitos are concerned, one must admit that though much work has been devoted to the analytical study of the water in which the early stages are passed, the results are disappointing. A consideration of the published work suggests several reasons for this. Investigation into the ecology of the mosquito has had a vogue, and much of it has been done by workers who were isolated and whose knowledge of chemical technique and freshwater biology was limited. Apart from that, the inherent difficulties are great, for the worker must hunt for the limiting chemical and physical factors among a host of others which are doubtless unimportant, and there are few clues to indicate which of the chemical constituents of the water affects the mosquito. The data are therefore voluminous and it is difficult to reduce them to order and present them so that they can be readily understood.

Sign in / Sign up

Export Citation Format

Share Document