One-step synthesis of Sb2O3 broom-like belts with controllable morphology

2005 ◽  
Vol 83 (8) ◽  
pp. 1093-1097 ◽  
Author(s):  
Qingrui Zhao ◽  
Xuanjun Zhang ◽  
Qing Yang ◽  
Yi Xie
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Solvothermal Reaction ◽  
Antimony Trioxide ◽  
Reactant Ratio ◽  
Reaction Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
One Step ◽  
Template Free

A direct and simple surfactant- and template-free route has been developed for the controlled synthesis of Sb2O3 belt-like microstructures. By adjusting the reactant ratio between SbCl3 and urea under solvothermal reaction conditions, broom-like belts and rods of Sb2O3 have been successfully prepared. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), and X-ray photoelectron spectroscopy (XPS) has been used to characterize the phases and morphologies of the as-prepared products. A possible formation mechanism is also discussed.Key words: antimony trioxide, solvothermal synthesis, broom-like belts.

Activation of persulfate by heterogeneous catalyst ZnCo2O4–RGO for efficient degradation of bisphenol A

2020 ◽  
Vol 98 (12) ◽  
pp. 771-778
Author(s):  
Xin Chang ◽  
Xiangyang Xu ◽  
Zhifeng Gao ◽  
Yingrui Tao ◽  
Yixuan Yin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Bisphenol A ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Nucleation Sites ◽  
One Step ◽  
Application Potential

A nanocomposite, reduced graphene oxide (RGO) modified ZnCo2O4 (ZnCo2O4–RGO) was synthesized via one-step solvothermal method for activating persulfate (PS) to degrade bisphenol A (BPA). The morphology and structure of the nanocomposite were identified by X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. RGO provides nucleation sites for ZnCo2O4 to grow and inhibits the agglomeration of the nanoparticles. The influence of different reaction conditions on the oxidation of BPA catalyzed by ZnCo2O4–RGO was investigated, including the content of RGO, the dosage of catalyst, the concentration of humic acid (HA), anions in the environment, the reaction temperature, and pH. BPA can be totally degraded within 20 min under optimized reaction conditions. The presence of HA, Cl−, and NO3− only has a slight effect on the oxidation of BPA, whereas the presence of either H2PO4− or HCO3− can greatly inhibit the reaction. ZnCo2O4–RGO shows good cycling stability and practical application potential. A reaction mechanism of the degradation of BPA was also explored.

Preparation and characterization of CuInS2 nanorods and nanotubes from an elemental solvothermal reaction

2001 ◽  
Vol 16 (10) ◽  
pp. 2805-2809 ◽  
Author(s):  
Yang Jiang ◽  
Yue Wu ◽  
Shengwen Yuan ◽  
Bo Xie ◽  
Shuyuan Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Electron Transfer Reaction ◽  
Solvothermal Reaction ◽  
X Ray Diffraction ◽  
Spectroscopy Analysis ◽  
X Ray ◽  
Transmission Electron

A simple and convenient solvothermal reaction has been developed to produce CuInS2 nanorods and nanotubes from the elements in ethylenediamine at 280 °C. The products were characterized by x-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, scanning electron microscopy, and x-ray photoelectron spectroscopy. Analysis shows that the coordinating ability of ethylenediamine and the existence of liquid In may play important roles in the growth of one-dimension nanocrystallites and the electron-transfer reaction. In addition, spherical CuInS2 micrometer particles were obtained at 350 °C.

scholarly journals Hydrous Hydrazine Decomposition for Hydrogen Production Using of Ir/CeO2: Effect of Reaction Parameters on the Activity

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1340
Author(s):  
Davide Motta ◽  
Ilaria Barlocco ◽  
Silvio Bellomi ◽  
Alberto Villa ◽  
Nikolaos Dimitratos
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Precipitation Method ◽  
Reaction Conditions ◽  
X Ray ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Icp Ms ◽  
Hydrazine Decomposition

In the present work, an Ir/CeO2 catalyst was prepared by the deposition–precipitation method and tested in the decomposition of hydrazine hydrate to hydrogen, which is very important in the development of hydrogen storage materials for fuel cells. The catalyst was characterised using different techniques, i.e., X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM) equipped with X-ray detector (EDX) and inductively coupled plasma—mass spectroscopy (ICP-MS). The effect of reaction conditions on the activity and selectivity of the material was evaluated in this study, modifying parameters such as temperature, the mass of the catalyst, stirring speed and concentration of base in order to find the optimal conditions of reaction, which allow performing the test in a kinetically limited regime.

scholarly journals One-Step Synthesis of b-N-TiO2/C Nanocomposites with High Visible Light Photocatalytic Activity to Degrade Microcystis aeruginosa

Catalysts ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 579
Author(s):  
Xu Zhang ◽  
Min Cai ◽  
Naxin Cui ◽  
Guifa Chen ◽  
Guoyan Zou ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Chlorophyll A ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Paramagnetic Resonance ◽  
X Ray ◽  
Transmission Electron ◽  
One Step

Black TiO2 with doped nitrogen and modified carbon (b-N-TiO2/C) were successfully prepared by sol-gel method in the presence of urea as a source of nitrogen and carbon. The photocatalysts were characterized by field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman, electron paramagnetic resonance (EPR), and UV-vis diffuse reflectance spectra (DRS). The doped nitrogen, introduced defects, and modified carbon played a synergistic role in enhancing photocatalytic activity of b-N-TiO2/C for the degradation of chlorophyll-a in algae cells. The sample, with a proper amount of phase composition and oxygen vacancies, showed the highest efficiency to degrade chlorophyll-a, and the addition of H2O2 promoted this photocatalysis degradation. Based on the trapping experiments and electron spin resonance (ESR) signals, a photocatalytic mechanism of b-N-TiO2/C was proposed. In the photocatalytic degradation of chlorophyll-a, the major reactive species were identified as OH and O2−. This research may provide new insights into the photocatalytic inactivation of algae cells by composite photocatalysts.

Hydrothermal synthesis, characterization and gas sensing of Bi2MoxW1−xO6

2020 ◽  
Vol 13 (06) ◽  
pp. 2051032
Author(s):  
Li Zhang ◽  
Chengwen Song ◽  
Xiaoxing Zhang ◽  
Zhemin Shi ◽  
Jingkun Xiao
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Operating Temperature ◽  
Good Sensitivity ◽  
Good Property ◽  
X Ray ◽  
Transmission Electron ◽  
One Step ◽  
Sensing Application

Bi2MoxW[Formula: see text]O6 microspheres are synthesized by simple one-step hydrothermal method and the morphological characterizations are performed by X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), BET, scanning electron microscopy (SEM), transmission electron microscopy (TEM). The gas sensing of Bi2WO6, Bi2MoO6 and Bi2MoxW[Formula: see text]O6 is investigated. It can be concluded that the sensor of Bi2MoxW[Formula: see text]O6 has the same good sensitivity as pure Bi2MoO6 and Bi2WO6 to alcohol. It is noteworthy that the operating temperature of Bi2Mo[Formula: see text]W[Formula: see text]O6 is 200∘C which is lower than that of pure Bi2WO6 or Bi2MoO6 (240∘C), so Bi2MoxW[Formula: see text]O6 show its good property for alcohol gas sensing application.

scholarly journals One-step nitrogen plasma process for bimetallic impregnation to obtain N-TiO2−X/Au/Ag composite

2020 ◽  
Vol 10 ◽  
pp. 184798042090542 ◽  
Author(s):  
R Trejo-Tzab ◽  
JA Aguilar-Jiménez ◽  
P Quintana-Owen ◽  
Alejandro Ávila-Ortega ◽  
MA Alvarez-Lemus ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Titanium Oxide ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Nitrogen Plasma ◽  
Gold And Silver Nanoparticles ◽  
X Ray ◽  
Plasma Technique ◽  
Transmission Electron ◽  
One Step

The main motivation of this work is to deposit two different metals (gold and silver) on titanium oxide nanoparticles surface in a one-step simple and fast physical process by applying a nitrogen plasma as the main source of nitrogen atoms to obtain nanostructured N-TiO2 − X/Au/Ag materials. The obtained nanomaterials were characterized by X-ray photoelectron spectroscopy, X-ray diffraction, diffuse reflectance spectroscopy, scanning electron microscopy–energy dispersive X-ray spectroscopy, and high-resolution transmission electron microscopy. Based on the characterization results, we found that gold and silver nanoparticles were uniformly loaded on the titanium oxide nanocomposite surface, showing a surface plasmon absorption band due to the loading of the metal nanoparticles over titania samples. The results of this work have shown that nitrogen plasma technique is a more feasible and simple alternative to obtain the N-TiO2 − X/Au/Ag nanocomposite. Moreover, this plasma technique could be used to impregnate with other kind of metals over the surface of diverse nanomaterials.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

Characterization of columns grown during KrF laser micromachining of Al2O3–TiC ceramics

2003 ◽  
Vol 18 (5) ◽  
pp. 1123-1130 ◽  
Author(s):  
V. Oliveira ◽  
R. Vilar
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Laser Pulses ◽  
Formation Mechanisms ◽  
X Ray ◽  
Reducing Conditions ◽  
Transmission Electron ◽  
Column Formation ◽  
Krf Laser

This paper aims to contribute to the understanding of column formation mechanisms in Al2O3–TiC ceramics micromachined using excimer lasers. Chemical and structural characterization of columns grown in Al2O3–TiC composite processed with 200 KrF laser pulses at 10 J/cm2 was carried out by scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy, and x-ray diffraction analysis. Fully developed columns consist of a core of unprocessed material surrounded by an outer layer of Al2TiO5, formed in oxidizing conditions, and an inner layer, formed in reducing conditions, composed of TiC and Al3Ti or an AlTi solid solution. Possible mechanisms of column formation are discussed.

scholarly journals Green Synthesis of Feather-Shaped MoS2/CdS Photocatalyst for Effective Hydrogen Production

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Yang Liu ◽  
Hongtao Yu ◽  
Xie Quan ◽  
Shuo Chen
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Production ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance ◽  
Sulfur Source ◽  
X Ray ◽  
Transmission Electron ◽  
Microscopy Images ◽  
Effective Hydrogen ◽  
Better Than

MoS2/CdS photocatalyst was fabricated by a hydrothermal method for H2production under visible light. This method used low toxic thiourea as a sulfur source and was carried out at 200°C. Thus, it was better than the traditional methods, which are based on an annealing process at relatively high temperature (above 400°C) using toxic H2S as reducing agent. Scanning electron microscopy and transmission electron microscopy images showed that the morphologies of MoS2/CdS samples were feather shaped and MoS2layer was on the surface of CdS. The X-ray photoelectron spectroscopy testified that the sample was composed of stoichiometric MoS2and CdS. The UV-vis diffuse reflectance spectra displayed that the loading of MoS2can enhance the optical absorption of MoS2/CdS. The photocatalytic activity of MoS2/CdS was evaluated by producing hydrogen. The hydrogen production rate on MoS2/CdS reached 192 μmol·h−1. This performance was stable during three repeated photocatalytic processes.

scholarly journals Aluminum Nitride-Silicon Carbide Alloy Crystals Grown on SiC Substrates by Sublimation

2005 ◽  
Vol 10 ◽  
Author(s):  
Z. Gu ◽  
L. Du ◽  
J.H. Edgar ◽  
E.A. Payzant ◽  
L. Walker ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Original Source ◽  
X Ray ◽  
Alloy Crystal ◽  
Transmission Electron ◽  
Crystal Substrate ◽  
Vapor Distribution ◽  
Uniform Composition

AlN-SiC alloy crystals, with a thickness greater than 500 µm, were grown on 4H- and 6H-SiC substrates from a mixture of AlN and SiC powders by the sublimation-recondensation method at 1860-1990 °C. On-axis SiC substrates produced a rough surface covered with hexagonal grains, while 6H- and 4H- off-axis SiC substrates with different miscut angles (8° or 3.68°) formed a relatively smooth surface with terraces and steps. The substrate misorientation ensured that the AlN-SiC alloy crystals grew two dimensionally as identified by scanning electron microscopy (SEM). X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed that the AlN-SiC alloys had the wurtzite structure. Electron probe microanalysis (EPMA) and x-ray photoelectron spectroscopy (XPS) demonstrated that the resultant alloy crystals had non-stoichiometric ratios of Al:N and Si:C and a uniform composition throughout the alloy crystal from the interface to the surface. The composition ratio of Al:Si of the alloy crystals changed with the growth temperature, and differed from the original source composition, which was consistent with the results predicted by thermodynamic calculation of the solid-vapor distribution of each element. XPS detected the bonding between Si-C, Si-N, Si-O for the Si 2p spectra. The dislocation density decreased with the growth, which was lower than 106 cm−2 at the alloy surface, more than two orders of magnitude lower compared to regions close to the crystal/substrate interface, as determined by TEM.

Sign in / Sign up

Export Citation Format

Share Document