scholarly journals Static and seismic passive earth pressure coefficients on rigid retaining structures

2000 ◽  
Vol 37 (2) ◽  
pp. 463-478 ◽  
Author(s):  
A -H Soubra

The passive earth pressure problem is investigated by means of the kinematical method of the limit analysis theory. A translational kinematically admissible failure mechanism composed of a sequence of rigid triangles is proposed. This mechanism allows the calculation of the passive earth pressure coefficients in both the static and seismic cases. Quasi-static representation of earthquake effects using the seismic coefficient concept is adopted. Rigorous upper-bound solutions are obtained in the framework of the limit analysis theory. The numerical results of the static and seismic passive earth pressure coefficients are presented and compared with the results of other authors.Key words: limit analysis, passive pressure, earthquake.

2011 ◽  
Vol 48 (5) ◽  
pp. 767-780 ◽  
Author(s):  
Armando N. Antão ◽  
Teresa G. Santana ◽  
Mário Vicente da Silva ◽  
Nuno M. da Costa Guerra

A three-dimensional (3D) numerical implementation of the limit analysis upper-bound theorem is used to determine passive horizontal earth-pressure coefficients. An extension technique allowing determination of the 3D passive earth pressures for any width-to-height ratios greater than 7 is presented. The horizontal passive earth-pressure coefficients are presented and compared with solutions published previously. Results of the ratio between the 3D and two-dimensional horizontal passive earth-pressure coefficients are shown and found to be almost independent of the soil-to-wall friction ratio. A simple equation is proposed for calculating this passive earth-pressure ratio.


2013 ◽  
Vol 353-356 ◽  
pp. 895-900 ◽  
Author(s):  
Xin Rong Liu ◽  
Ming Xi Ou ◽  
Xin Yang

In view of the shortage of using classical earth pressure theories to calculating passive earth pressure of cohesive soil on retaining wall under complex conditions. Based on the planar slip surface and the back of retaining wall was inclined and rough assumption, the calculation model of passive earth pressure of cohesive backfill under uniformly distrubuted loads was presented, in which the upper bound limit analysis was adopted. Meanwhile it was proven that the prevailing classical Rankine’s earth pressure theory was a special example simlified under the condition of its assumptions. For it’s difficult to determine the angle of slip surface , a relatively simple method for calculating the angle was proposed by example. And the influence of angle of wall back , friction angle of the interface between soil and retaining wall, cohesion force and internal friction angle of backfill soil to planar sliding surface and passive earth pressure were analyzed. Some good calculation results were achieved, these analysis can provide useful reference for the design of retaining wall.


2011 ◽  
Vol 378-379 ◽  
pp. 461-465 ◽  
Author(s):  
Xiao Ming Tu ◽  
Yu You Yang ◽  
Gui He Wang

With the development and utilization of underground space, some new tunnel forms are emerging, such as the rectangular tunnel, double tunnels, treble tunnels and so on. The aim of this paper is to determine the collapse face pressure of a rectangular tunnel driven by a pressurized shield. The calculation is based on the upper-bound method of the limit analysis theory. A translational kinematically admissible failure mechanism consists a sequence of truncated rigid cones are considered for the calculation schemes. The numerical results obtained by the calculation are presented.


2016 ◽  
Vol 79 ◽  
pp. 96-104 ◽  
Author(s):  
Armando N. Antão ◽  
Teresa G. Santana ◽  
Mário Vicente da Silva ◽  
Nuno M.C. Guerra

2001 ◽  
Vol 38 (4) ◽  
pp. 876-881 ◽  
Author(s):  
Jyant Kumar

By taking the failure surface as a combination of the arc of a logarithmic spiral and a straight line, passive earth pressure coefficients in the presence of horizontal pseudostatic earthquake body forces have been computed for an inclined wall placed against cohesionless backfill material. The presence of seismic forces induces a considerable reduction in the passive earth resistance. The reduction increases with an increase in the magnitude of the earthquake acceleration. The effect becomes more predominant for loose sands. The obtained results compared well with those reported in the literature using curved failure surfaces. However, the results available in the literature on the basis of a planar failure surface are found to predict comparatively higher passive resistance.Key words: earth pressures, earthquakes, limit equilibrium, plasticity, retaining walls, sands.


Sign in / Sign up

Export Citation Format

Share Document